1. Jeremy Slay
(740)215-5578
jeremyslay@hotmail.com
SUMMARY
I am a manufacturing professional with over 10 years experience with major international glass
manufacturers. I entered the manufacturing field after six years in the automotive service
management profession that followed my service in the US Army. While serving in the Army I
earned the “Chief of Staff coin for Excellence in Service”. Before my military service I studied
Drafting and design at Lancaster Vocational high school where I earned my certificate in Drafting
& design.
O-I Machine Upkeep January 5, 2016 – Present
Waco TX USA
I operated & supervised 1-3 personnel in the operation of I.S. glass container forming machines
with com-soc I, II & III computerized timers. I worked extensively in drop/gob loading, mould
adjustment, plunger adjustment, blow adjustment. I also corrected manufacturing defects,
performed changes of mould, press & blow equipment, performed and supervised process
change operations and assisted with machine repairs. I coordinated with management and
hourly union personnel to ensure timely completion of assigned tasks and that production goals
were met. I organized and directed maintenance & machine repair personnel as needed to
ensure all production down time was used efficiently. I performed quality inspections to ensure
customer needs were met and to confirm manufactured product met FDA food container
guidelines.
O-I Journeyman Machine Operator November 6, 2014 – January 5, 2016
Waco TX USA
I operated I.S. glass container forming machines with com-soc I, II & III computerized timers. I
worked extensively in drop/gob loading, mould adjustment, plunger adjustment, blow
adjustment. I also corrected manufacturing defects, performed changes of mould, press & blow
equipment assisted with process change operations and assisted with machine repairs. I
performed quality inspections to ensure customer needs were met and to confirm

2. manufactured product met FDA food container guidelines.
Anchor Hocking LLC Leadman June 4, 2013-October 21, 2014
Lancaster OH USA
I lead a crew of up to 12 personnel supervising the glass-making process in the Anchor Hocking
forming department. I served as an intermediary between management and hourly personnel.
I worked with Supervisors and personnel in our finishing department to ensure the best possible
product was produced and packed for shipment. I supervised the maintenance and repair of
production equipment as well as assisting in or leading personnel in defect correction. I worked
to ensure compliance with OSHA and Anchor Hocking safety safety protocol were met during all
on-shift work. I also worked to train and develop new forming department personnel.
Anchor Hocking LLC Floor Operator December 14, 2011-October 21, 2014
I assisted in the glass production process, repaired machines, replaced mould equipment and
corrected manufacturing defects. I coordinated with management and hourly union personnel
to ensure timely completion of assigned tasks and that production goals were met. I organized
and directed maintenance & machine repair personnel as needed to ensure all production down
time was used efficiently.
Anchor Hocking LLC Journeyman Machine Operator September 1, 2010-October 21,2014
I operated glass forming machines including the Olivoto O90 & H28 press blow machines, TT
press blow machines, both pneumatic and hydraulic single & dual press and both mechanical &
computerized timers. I worked extensively in drop/gob loading, mould adjustment, mould
cleaning, plunger adjustment, blow adjustment, mould making and glass glazing. I also
corrected manufacturing defects, assisted with the changing of mould equipment and with
machine repairs.
Anchor Hocking LLC Apprentice Machine Operator August 6,2006-September 1,2010
I trained in and operated glass forming machines including the Olivoto O90 & H28 press blow
machines, TT press blow machines, both pneumatic and hydraulic single & dual press and both
mechanical & computerized timers. I trained & worked extensively in drop/gob loading, mould
adjustment, mould cleaning, plunger adjustment, blow adjustment, mould making and glass
glazing. I also learned to correct manufacturing defects, assist with the changing of mould

3. equipment and with machine repairs.
Anchor Hocking LLC Burn-off Operator October 8,2006-January 24, 2009
I operated burn-off machines in both the 36 & 24 head configurations. Adjusted oxygen/gas
burner system to ensure quality burn-off, checked & adjusted height, operated vacuum system
and inspected glass ware to ensure product met required quality levels.
Anchor Hocking LLC Floor Person August 6,2006-February 24, 2009
I cleaned production floor, sorted glass "cullet", stocked & mixed oil & chemicals needed for
glass production process. I also served as general labor for any and all needs as required by
management.
EDUCATION INFORMATION
Lancaster Vocational High School Lancaster, Ohio 43130
Certificate of completion Drafting & design
MILITARY SERVICE
US Army July 1998-February 1999