ATC is a leading U.S. Industrial adhesive manufacturer and R & D facility specializing in epoxies, acrylics, ester blends and polyureas for the construction and repair markets. We are one of the only epoxy manufacturers that offer a private label for resellers.

1. Since the early 70’s Adhesives Technology
Corporation (ATC) has been a leading U.S.
manufacturer and R & D facility specializing in
epoxies, acrylics, ester blends and poly ureas
for the construction and repair markets.

2. Ultra bond 1
Epoxy Anchoring Adhesive
• Ultra bond 1 Epoxy Anchoring Gel is a
two component (1:1 ratio), 100% solids,
high modulus, structural epoxy gel. It is
a solvent free, no odor, high strength,
moisture insensitive, non-sag epoxy
system.

3. Ultra bond 2
Epoxy Anchoring Adhesive
Ultra bond 2 Epoxy Anchoring Gel is a two
component (1:1 ratio), 100% solids, high modulus
epoxy gel. It is a solvent free, high strength,
moisture insensitive, non-sag epoxy system.
Ultra bond 2 Epoxy Anchoring Gel is formulated
for anchoring threaded rod, bolts, rebar and
smooth dowels into concrete, grout filled block,
and unreinforced masonry. Ultra bond 2 has
been tested in accordance with AC58 and is
acceptable for long term tensile loads. It may also
be used for short term tensile load anchors,
which includes wind and seismic forces.

4. • Adhesives Technology Corp
• 450 East Copans Rd
• Pompano Beach, Fl, 33064
• Phone : 800.892.1880
• Fax
: 800.362.3320
• http://atcepoxy.com/