2016_BASF_ArchitecturalCoatingsBrochure_EL.pdf

We create
chemistry
that helps
your paint
weather
the world.
Products for
Architectural
Coatings

Contents
Latex Polymers 5
Acronal®
Joncryl®
Colorants 13
PureOptions®
Aurasperse®
Xfast®
Defoamers 17
Foamaster®
FoamStar®
Dispersants 23
Dispex®
Coalescents 29
Loxanol®
Rheology Modifiers 33
Rheovis®
Wetting Agents 39
Hydropalat®
Efka®
Opacity Enhancers 43
AQACell®
Acronal®
Dispex®
Satintone®
Mattex®
Ultrex®
Kaolin Extenders 45
ASP®
Satintone
Mattex
Ultrex
Translink®
Performance Additives 51
Chimassorb®
Tinuvin®
Lignostab®
Irgaguard®
Irgarol®
Tinopal®
2 | Products for Architectural Coatings

Products for
Architectural Coatings
A can of paint opens up endless possibilities for individual expression, creativity, and
change. Architectural coatings give life to both interior and exterior spaces while protecting
the surfaces beneath. These coatings must provide superior performance and quality
to stand the test of time. BASF offers not only a comprehensive portfolio of pigment
preparations, latexes, resins, and additives for the can of paint, but also formulation
expertise customized to create innovative solutions for your architectural coatings.
Products for Architectural Coatings | 3
Stain Resistance
D
i
r
t
P
i
c
k
-
u
p
R
e
s
i
s
t
a
n
c
e
T
a
n
n
i
n
B
l
o
c
k
i
n
g
Stain Blocking
Ultra Low VOC
Formulating
B
l
o
c
k
R
e
s
i
s
t
a
n
c
e
S
e
l
f
-
p
r
i
m
i
n
g
C
o
a
t
i
n
g
s
Smoothness
BASF
FOCUS
Key Performance
Properties for
Architectural
Coatings

Product Name
Polymer Type Product Specifications
Product Description
Acrylic
Styrenated
Acrylic
Solids
Content
(%)
pH
Value
Maximum
Viscosity
Particle
Size
(nm)
MFFT
(
˚
C)
APEO
Free
Acronal®
296 D 50
7.5-
8.5
6000-
8500
cps
ca.
100
ca. 20
Acronal®
296 D is a styrene acrylic resin designed to deliver very high
water resistance, pigment-binding capacity, and alkali resistance. It is
ideal for primer sealers, textured coatings, and masonry and industrial
paints. It also delivers excellent exterior mildew resistance in low sheen
and flat paints
Acronal®
4110 50
8.0-
9.0
750
cps
ca.
140
ca. 16
Acronal®
4110 is an all-acrylic resin optimized for 150 g/l VOC. Intended
for semi-gloss paints. Paints made with this product deliver superior block
resistance, excellent wet adhesion, and outstanding cleanability.
Acronal®
4220 50
7.5-
9.5
1800
cps
ca.
110
ca. 14
Acronal®
4220 is a straight acrylic with high durability, excellent wet
adhesion, PVA compatibility, and superior efflorescence resistance.
Acronal®
4410 50
7.5-
8.5
1500
cps
ca.
110
ca. 12
Acronal®
4410 is an all-acrylic resin intended for wood and concrete
primers. It demonstrates excellent exterior tannin stain blocking and alkali/
efflorescence resistance, along with outstanding wet adhesion and good
corrosion resistance.
Acronal®
4510 60
6.0-
7.0
1000
cps
ca.
300
ca. -29
Tg
Acronal®
4510 is a flexible all-acrylic resin developed for high perfor-
mance elastomeric coatings with excellent dirt pick-up resistance. It
delivers excellent flexibility at low temperatures and provides very good
adhesion to masonry. It also displays high water vapor permeability and
low water absorption, which provides excellent long-term performance. It
is freeze/thaw resistant at 50 g/l VOC.
Acronal®
PLUS 4130 50
7.5-
8.5
1000
cps
ca.
130
ca. 3
Acronal®
PLUS 4130 is an all-acrylic resin optimized for very low VOC
interior and exterior paints with high performance and excellent durability.
It delivers excellent block resistance, good low temperature touch-up,
superb wet adhesion and high scrubs, all at very low VOC. It also delivers
improved titanium dioxide efficiency.
Acronal®
PLUS 4230 60 7.5-9
1200
cps
ca.
270
ca. 6
Acronal®
PLUS 4230 is a high solids, all-acrylic resin optimized for high
performance (50 g/l VOC). It is freeze/thaw resistant, and can be formulat-
ed in flat and satin finishes. This product has good slurry compatibility for
interior/exterior application in contractor, premium grade paints. It offers
excellent wet adhesion and chalk adhesion with good early water resis-
tance as well as good scrub resistance. It also delivers improved titanium
dioxide efficiency.
Acronal®
PLUS 4240 54
8.0-
9.0
500
cps
ca.
240
ca. 6
Acronal®
PLUS 4240 is an all-acrylic resin optimized for high performance
(50 g/l VOC). It is freeze/thaw resistant, and can be formulated in flat and
satin finishes. This product has good slurry compatibility for interior/exte-
rior application in contractor, premium grade paints. It offers resistance
to dirt pick-up and surfactant leaching, as well as wet adhesion and chalk
adhesion.
Acronal®
PLUS 4641 50
7.5-
8.5
500
cps
ca.
110
ca. 6
Acronal®
PLUS 4641 is an acrylic resin developed for interior and exterior
stain blocking primers with or without zinc oxide. Acronal®
PLUS 4641 can
be formulated at 100 g/l VOC with freeze/thaw resistance or less than 50
g/l VOC without freeze/thaw resistance. It can be used as a universal stain
blocking primer.
Latex Polymers

Interior and Exterior Paints Special Purpose Paints Recommended Application
Flat
Satin
Semi-gloss
High-gloss
General
Use
Primer
Stains
Elastomeric
Textured
Coatings
Clear
Coatings
Interior
Wood
Coatings
Exterior
Wood
Coatings
Anti-corrosive
Primer
DTM
Topcoat
(without
anti-corrosive
pigments)
Metal
Topcoat
(assumes
primer
underneath)
Concrete
Primer
Concrete
Topcoat
Wood
Clear
Coatings
Wood
Pigmented
Gloss
Coatings
Wood
Stains
Wood
Primer
Good Better Best
Latex Polymers | 7

Product Name
Product Description
Acrylic
Styrenated
Acrylic
Solids
Content
(%)
pH
Value
Maximum
Viscosity
Particle
Size
(nm)
MFFT
(
˚
C)
APEO
Free
Acronal®
PLUS 4670 50
7.5-
8.5
100-
800
cps
ca.
130
ca. 10
Acronal®
PLUS 4670 is a very low VOC capable acrylic latex for premium
interior paints. It has outstanding titanium dioxide efficiency, excellent
scrub, block resistance, and adhesion.
Acronal®
EDGE 4750 50
7.5-
8.5
1000
ca.
120
ca. 15
Acronal®
EDGE 4750 is a state-of-the-art acrylic latex for paint-and-
primer-in-one. It has outstanding stain blocking and washability, and high
scrub and block resistance. It also has high titanium dioxide efficiency.
Acronal®
ECO 4830 50
7.5-
8.5
1000
cps
ca.
125
ca. 3
Acronal®
ECO 4830 is a unique low odor all-acrylic resin optimized for
very low VOC interior paints. It delivers excellent block resistance, good
low temperature touch-up, superb wet adhesion and high scrubs. It also
delivers improved titanium dioxide efficiency.
Acronal®
PRO 80 NA 50
7.5-
9.0
50-
350
cps
NA ca. 22
Acronal®
PRO 80 NA is a styrene acrylic latex for direct-to-metal primers.
It demonstrates excellent corrosion resistance, good adhesion, and good
early water resistance.
Acronal®
NS 567 50
8.0-
9.5
3000-
5000
cps
NA
ca. -6
Tg
Acronal®
NS 567 is a styrene acrylic resin designed for excellent water re-
sistance and flexibility for elastomeric coatings. It also offers high pigment
binding capacity and good filler compatibility.
Acronal®
S 760 50 8.5-10
1000
cps
ca.
100
ca. 22
Acronal®
S 760 is a styrene acrylic resin specifically designed for anti-cor-
rosion paints or primers. It delivers flash rust resistance, reactive pigment
compatibility, and excellent long term durability, with superior under-film
corrosion protection.
Joncryl®
537 46 9.0
50-
250
cps
NA ca. 42
Joncryl®
537 is an emulsion with excellent gloss, clarity, adhesion, and
manufacturing ease. It is suitable as a sole vehicle or alkyd modifier for
a variety of general metal, wood, and plastic finishes. It is a modifier for
acrylic and vinyl acrylic architectural paints.
Joncryl®
2981 44 8.8
< 500
cps
NA ca. 45
Joncryl®
2981 is a one-pack, all-acrylic self-crosslinking dispersion that
is non-formaldehyde emitting. It offers excellent clarity, weatherability, and
chemical resistance for wood coatings.
Joncryl®
PRO 1522 45 9
400
cps
NA ca. 26
Joncryl®
PRO 1522 is a styrene acrylic resin that features exterior metal
protection, excellent corrosion resistance, and good weatherability. It is
suitable for thin film coatings and high gloss applications.
Joncryl®
PRO 1524 43 8.3
1000
cps
NA ca. 25
Joncryl®
PRO 1524 is a styrene acrylic resin that demonstrates good
chemical resistance, excellent wet and dry adhesion, outstanding UV
durability, and good corrosion resistance.
Latex Polymers

Interior and Exterior Paints Special Purpose Paints Recommended Application
Flat
Satin
Semi-gloss
High-gloss
General
Use
Primer
Stains
Elastomeric
Textured
Coatings
Clear
Coatings
Interior
Wood
Coatings
Exterior
Wood
Coatings
Anti-corrosive
Primer
DTM
Topcoat
(without
anti-corrosive
pigments)
Metal
Topcoat
(assumes
primer
underneath)
Concrete
Primer
Concrete
Topcoat
Wood
Clear
Coatings
Wood
Pigmented
Gloss
Coatings
Wood
Stains
Wood
Primer
Good Better Best
Latex Polymers | 9

Product Name
Product Description
Acrylic
Styrenated
Acrylic
Solids
Content
(%)
pH
Value
Maximum
Viscosity
Particle
Size
(nm)
MFFT
(
˚
C)
APEO
Free
Joncryl®
1532 51 8.0
400
cps
NA ca. 14
Joncryl®
1532 is a versatile emulsion offering excellent adhesion to
a wide variety of substrates including plastics, galvanized steel, and
previously painted or chalked surfaces. It can also be applied under a wide
range of temperature and humidity conditions and is low VOC capable.
Joncryl®
2970 43 8.9
400
cps
NA ca. <5
Joncryl®
2970 is an all-acrylic, self-crosslinking emulsion that provides a
wet look for patio pavers, stamped concrete and natural stone. It resists
whitening even after weeks of continuous water exposure, and it provides
excellent weatherability while being 50-100 g/l VOC capable.
Joncryl®
2980 45 9.0
< 300
cps
NA ca. 18
Joncryl®
2980 is an all-acrylic self-crosslinking emulsion that provides a
wet look appearance for interior and exterior clear and pigmented coatings
at 100 g/l VOC.
Joncryl®
1982 41 8.5
250
cps
NA
ca.
>70
Joncryl®
1982 is a styrene acrylic, self-crosslinking emulsion. Its formula-
tion stability exhibits excellent chemical resistance and film hardness with
lower yellowing. It is ideal for wood and plastic applications.
Joncryl®
1984 41 8.4
< 100
cps
NA
ca.
>70
Joncryl®
1984 is a styrene acrylic, self-crosslinking emulstion with
formulation stability, exhibiting UV resistance and film hardness. It is
recommended for all concrete and wood applications.
Joncryl®
8383 40 8.2 95 cps NA ca. 16
Joncryl®
8383 is a soft, self-crosslinking, styrene acrylic that offers good
clarity and “warmth of wood.” This product has good chemical and block
resistance, and excellent water water resistance and wet adhesion. It is
recommended for concrete and wood applications.
Acronal®
LR 9014 45 8.0
250
cps
NA ca. <3
Acronal®
LR 9014 is an all-acrylic self-crosslinking emulsion that is
easy to formulate, with excellent block resistance and wet adhesion. It is
suitable for exterior, clear or color wood coatings from medium gloss to
high gloss.
Joncryl®
95 30 8.0
100
cps
NA ca. 20
Joncryl®
95 is an ultra-fine particle size, colloidal dispersion for wood pen-
etration and in-can clarity. It demonstrates minimal grain raising, excellent
sandability and sealing characteristics. It can be used in stains, sealers,
wood preservatives and features high Tg/low MFFT balance.
Joncryl®
1921 45 8.8
1,200
cps
NA ca. 12
Joncryl®
1921 is a styrene acrylic emulsion that offers a balance between
block resistance and adhesion properties for hardboard primer coatings.
Joncryl®
1919 47 8.0
1,600
cps
NA ca. 19
Joncryl®
1919 is a cost-effective styrene acrylic emulsion for use in
hardboard primer and cement fiberboard markets. It offers excellent water
resistance, adhesion (specifically to aluminum), and early block resistance.
It can be formulated without added solvents in many applications.
Latex Polymers

Interior and Exterior Paints Recommended Application
Flat
Satin
Semi-gloss
High-gloss
General
Use
Primer
Anti-corrosive
Primer
DTM
Topcoat
(without
anti-corrosive
pigments)
Metal
Topcoat
(assumes
primer
underneath)
Concrete
Primer
Concrete
Topcoat
Wood
Clear
Coatings
Wood
Pigmented
Gloss
Coatings
Wood
Stains
Wood
Primer
Good Better Best
Latex Polymers | 11

Product Name
Color/
Mass-
tone
% Primary
Pigments
% Filler
Pigments
% Water
Density
(lbs/gal)
Low
VOC
APEO
Free
Formaldehyde
Free
Low
Odor
Resealable
and
Recyclable
Containers
w/w v/v w/w v/v w/w
PureOptions Eco-Colorants for Point-of-Sale Tinting Applications
PUREOPTIONS™ AX YELLOW Yellow 32.4 25.8 5.9 1.8 41 10.2
PUREOPTIONS™ C YELLOW
OXIDE
Yellow 57 25 0 0 23.9 15
PUREOPTIONS™ T MEDIUM
YELLOW
Yellow 41.4 33.4 3.9 1.2 36.8 10.5
PUREOPTIONS™ YE YELLOW Yellow 59 24.2 2.3 1.1 23.6 16.8
PUREOPTIONS™ B LAMP
BLACK
Black 8.7 7 30.8 12.1 39.9 11.5
PUREOPTIONS™ Bl INDAN-
THRONE Blue
Blue 22 16 0 0 53.2 9.3
PUREOPTIONS™ EU PTHALO
BLUE
Blue 12.1 9.7 24.2 8.4 37.7 11
PUREOPTIONS™ DU PTHALO
GREEN
Green 18 11.3 17.6 5.4 38.5 10.8
PUREOPTIONS™ F RED OXIDE Red 59.3 24.1 3.2 1.5 20.5 17
PUREOPTIONS™ R RED Red 19.7 17.3 20.5 8.4 32.7 10.4
PUREOPTIONS™ RU HIGH HIDE
RED
Red 33.4 27.5 7.5 3.3 30.4 10.2
PUREOPTIONS™ I BROWN
OXIDE
Brown 38 16.1 18.3 7.5 20.7 15.4
PUREOPTIONS™ L RAW
UMBER
Umber 26.5 15 14.7 4.6 35.8 11.7
PUREOPTIONS™ KX WHITE White 59.3 29.8 6.8 5.2 14.8 16.1
PUREOPTIONS™ O ORANGE Orange 31.9 21.4 1.6 0.8 41 10.1
PUREOPTIONS™ VU HIGH HIDE
VIOLET
Magenta 23.4 16.7 0 0 50.6 9.3
PUREOPTIONS™ J Violet 7.8 7.5 35.6 13.1 34.6 12.2
Colorants

Product Name
Chemical
Nature and
Color Index
% Solids by Weight % Solids by Volume
Density
(lbs/gal)
VOC
Content
APEO
Free
Exterior
Use
Total Pigment Total Pigment
Aurasperse/Aurasperse II Aqueous Pigment Dispersions for In-Plant Tinting Applications
AURASPERSE II®
W-7014
CARBON BLACK
Carbon Black
(PBk 7)
56 41 45 29 10.4 Low VOC
AURASPERSE II®
W-7016
CARBON BLACK
Carbon Black
(PBk 7)
66 48 56 35 10.8 Low VOC
AURASPERSE®
W-7012
CARBON BLACK
Carbon Black
(PBk 7)
46 33 37 20 10.1
AURASPERSE®
W-7017
CARBON BLACK
Carbon Black
(PBk 7)
52 39 42 24 10.4
AURASPERSE®
W-6017
CHROME GREEN OXIDE
Green Oxide
(PG 17)
76 62 49 26 17.6
AURASPERSE®
W-4123
PHTHALO BLUE
PB 15:0 34 20 28 14 9.2
AURASPERSE II®
BLUE 15:3 PB 15:3 58 46 47 37 10.3 Low VOC
AURASPERSE®
W-6013
PHTHALO GREEN
PG 7 45 33 30 19 10.6
AURASPERSE®
W-2090
PYRAZOLONE ORANGE
PO 13 34 26 26 18 9.3
AURASPERSE II®
RED 3RS PR 112 58 50 48 39 10.2 Low VOC
AURASPERSE II®
W-3170
NAPHTHOL RED
PR 170 61 44 54 36 9.7 Low VOC
Only in
masstone
AURASPERSE®
W-3022
NAPTHOL RED LIGHT
PR 2 31 15 20 11 9.7
AURASPERSE®
W-4281
NAPHTHOL RED
PR 23 35 23 30 17 9.2
AURASPERSE II®
RED 2030 PR 254 61 52 51 40 10.5 Low VOC
AURASPERSE®
W-3160
PERMANENT CARMINE
PR 5 41 25 37 18 9.2
AURASPERSE®
W-1041
DIARYLIDE YELLOW
PY 14 44 39 36 30 9.6
AURASPERSE II®
W-1241 AZO
YELLOW
PY 74 66 53 56 42 10.6 Low VOC
AURASPERSE II®
YELLOW GO PY 74 55 45 48 38 9.6 Low VOC
AURASPERSE®
W-3041 RED
OXIDE
Red Iron Oxide
(PR 101)
64 59 32 21 16.0
AURASPERSE®
W-3042G RED
OXIDE
Red Iron
Oxide
67 58 37 22 16.1
AURASPERSE®
W-308
TITANIUM WHITE
TiO2 (PW 6) 76 72 48 39 18.7
AURASPERSE®
W-318
TITANIUM WHITE
TiO2 (PW 6) 72 63 46 30 16.1
AURASPERSE II®
W-1026
YELLOW OXIDE Y-42
Yellow Iron
Oxide( PY 42)
66 60 38 26 15.0
AURASPERSE®
W-1021
YELLOW OXIDE
Yellow Iron
Oxide( PY 42)
57 51 30 21 13.7 Low VOC
AURASPERSE®
W-1025
YELLOW IRON OXID
Yellow Iron
Oxide( PY 42)
61 54 35 22 13.9
Colorants
Colorants | 15

Product Name Chemistry Color Index Pigment Content (%) Ultra Low VOC
Xfast Pigment Preparations: Ultra Low VOC, Stir-In Colorants for Paints, Coatings, and Transparent Wood Glazes
Xfast®
White 0025 Titanium dioxide, rutile Pigment White 6 85
Xfast®
Black 0050 Iron black oxide Pigment Black 11 80
Xfast®
Black 0066 Carbon black Pigment Black 7 80
Xfast®
Black 0095 Chromium-iron oxide Pigment Brown 29 80
Xfast®
Yellow 0962 Quinophthalone yellow Pigment Yellow 138 85
Xfast®
Yellow 1102 Bismuth vanadate yellow Pigment Yellow 184 80
Xfast®
Yellow 1256 Arylide yellow Pigment Yellow 74 75
Xfast®
Yellow 1916 Iron oxide hydrate, transparent Pigment Yellow 42 60
Xfast®
Yellow 1990 Iron oxide hydrate, opaque Pigment Yellow 42 60
Xfast®
Red 2817 Iron-III oxide, transparent Pigment Red 101 60
Xfast®
Brown 2915 Iron-III oxide, semi-transparent Pigment Red 101 80
Xfast®
Orange 2930 Pyrazolo-quinazolone orange Pigment Orange 67 75
Xfast®
Orange 3100 Diketo-pyrrolo-pyrrole Pigment Orange 73 75
Xfast®
Red 3390 Iron-III oxide Pigment Red 101 80
Xfast®
Red 3855 Naphthol-AS red Pigment Red 112 75
Xfast®
Red 3860 Diketo-pyrrolo-pyrrole Pigment Red 254 80
Xfast®
Magenta 4790 Quinacridone Pigment Red 122 80
Xfast®
Blue 6310 Co/Al-oxide Pigment Blue 28 80
Xfast®
Blue 6875 Cu-phthalocyanine, alpha Pigment Blue 15:2 80
Xfast®
Blue 7080 Cu-phthalocyanine, beta Pigment Blue 15:3 80
Xfast®
Green 8730 Cu-phthalocyanine, chlorinated Pigment Green 7 80
Xfast®
Green 9990 Chrome-III-oxide Pigment Green 17 80
Colorants

Product Name
Solids
(%)
Incorporation
VOC Content
(%)
Recommended for
Low VOC
Systems*
Water-based
Systems
Solvent-
based
Systems
Solvent-free
Systems
Mineral Oil-based Defoamers
Foamaster®
MO 2107 > 98 grinding stage / let-down stage let-down 2
Foamaster®
MO 2111 NC > 91 grinding stage / let-down stage let-down 9
Foamaster®
Foamaster®
Foamaster®
Foamaster®
MO 2170 100 at any stage of the production process < 0.1
Foamaster®
Foamaster®
MO 2175 > 98 at any stage of the production process 2
Foamaster®
Foamaster®
Foamaster®
Foamaster®
Foamaster®
MO NDW NC > 78 at any stage of the production process 22
Foamaster®
MO NXZ NC > 88 at any stage of the production process 12
White Oil-based Defoamers
Foamaster®
WO 2323 100 grinding stage / let-down stage let-down < 0.1
Emulsion Defoamers
FoamStar®
ED 2522 ~ 20 at any stage of the production process < 0.1
FoamStar®
ED 2523 ~ 27 grinding stage / let-down stage let-down < 0.1
FoamStar®
ED 2526 ~ 80 before or after processing < 1
Defoamers
*
Recommended for low-VOC paints and coatings if VOC content 1%. Measurements done according to the ISO 11890-2 analytical method defined in
the European Paints Directive 2004/42/EC. For products with a VOC level above 15% the value is based on calculation according to recipe

Features and Benefits
Interior and Exterior Paints Special Purpose Paints
High
PVC
Paints
Matte/Interior
Semi-gloss
Gloss
Wood
Paints
and
Stains
Exterior
and
Elastic
Paints
and
Plasters
Colorants
Low
VOC
Suitable for low surfactant containing systems
Broad-spectrum highly compatible defoamer specifically designed for water-based
paints; excellent efficiency in systems with coarse ingredients
Cost effective with broad spectrum use - effective in low VOC paints
Effective in paints using associative thickeners
High persistency, broad compatibility, effective in low VOC paints
Very effective defoamer for aqueous emulsion-
based paints as well as for monomer stripping
Especially effective in high gloss paints
Good persistency, non-settling, non-separating
Very effective in printing inks and polyvinyl alcohol
High compatibility, potency, and color acceptance: good post add
Excellent for adhesives
More potent version of Foamaster MO 2185, good performance in stains
General purpose, very broad spectrum
General purpose, very broad spectrum, improved dispersability over Foamaster MO
NDW NC
Effective defoamer specifically designed for emulsion paints
High-performance, ultra low VOC silicone emulsion defoamer for premium water-
based paints, clear coats and inks; excellent storage stability; extremely low VOC
content
Ultra low VOC, emulsion defoamer for medium to high PVC architectural coatings
water-based coatings, strong defoamer for both mill base and let-down; shows
good effects in alkyd emulsions
Good Best
Defoamers | 19

Product Name
Solids
(%)
Incorporation
VOC Content
(%)
Recommended for
Low VOC
Systems*
Water-based
Systems
Solvent-
based
Systems
Solvent-free
Systems
Powder Defoamers
FoamStar®
PB 2922 100 mixtures in powder form 0.1
FoamStar®
PB 2941 90 mixtures in powder form 10
Modified Polydimethylsiloxane-based Defoamers
FoamStar®
SI 2210 NC 99 at any stage of the production process 1
FoamStar®
SI 2250 99 grinding stage / final production 1
FoamStar®
SI 2280 99 at any stage of the production process 1
FoamStar®
SI 2292 10 at any stage of the production process 90
FoamStar®
ST 2410 98 grinding stage / let-down 2
FoamStar®
FoamStar®
ST 2420 99 grinding stage / let-down 0.5
FoamStar®
FoamStar®
FoamStar®
FoamStar®
FoamStar®
FoamStar®
ST 2446 98 at any stage of the production process 2
Defoamers

Interior and Exterior Paints Special Purpose Paints
High
PVC
Paints
Matte/Interior
Semi-gloss
Gloss
Wood
Paints
and
Stains
Exterior
and
Elastic
Paints
and
Plasters
Colorants
Low
VOC
Emission-free powder defoamer, good compatibility and high efficiency in gypsum-
based systems; imparts good flow properties
Powder defoamer for mortars, putties, paste fillers, tile adhesives and self-leveling
flooring systems
100% active-content defoamer for non-pigmented and low-pigmented aqueous
coatings, printing inks, adhesives and UV-curable systems; provides a strong
spontaneous defoaming effect; outstanding long-term defoaming persistency
Water-based coatings and pigment concentrates where high-shear processing or
application exists; most effective in the range
Water-based acrylic, low-PVC and baking systems, water-based pigment
concentrates; defoamer with good compatibility and good defoaming
Highly compatible silicone-based defoamer solution for high gloss paints and
varnishes based on acrylics and polyurethane dispersions; minimized risk of
cratering
Low use level, excellent persistence, good choice for PVA
Low use level, excellent persistence, good choice for acrylics
Low use level, excellent persistence, good choice for PVA
Easy incorporation, post addable, semi gloss and gloss coatings
Mainly for post addition, more potent than FoamStar ST 2434
Silicone-based, for high quality paints, excellent persistency and foam knockdown
More potent version of FoamStar ST 2438
Top performance in low/ultra low VOC coatings and tints, good problem solving
defoamer
Top performance in low/ultra low VOC coatings and tints, good problem solving
defoamer, better flow and leveling properties
Good Best
Defoamers | 21

Product Name Description Solids (%)
Amine
Number
(mg KOH/g)
Acid Value
(mg KOH/g)
VOC Content
(%)
Recommended for
Low
VOC
Systems*
Water-based
Systems
Solvent-based
Systems
Solvent-free
Systems
Low-molecular-weight Dispersing Agents Mainly Designed for Water-based Systems, Surfactant-like Types
Dispex®
Ultra FA 4404
phosphonic acid
(chelating agent)
50 - - 0.1
Dispex®
Ultra FA 4416
aqueous solution based on:
ethoxylated fatty acids, fatty
alcohol, phosphates
75 - - 2
Dispex®
Ultra FA 4420
fatty acid modified emulsifier
(FAME)
99 35 22 1
Dispex®
Ultra FA 4425
fatty acid modified emulsifier
(FAME)
99 47 46 1
Dispex®
Ultra FA 4431
aliphatic polyether with acidic
groups
100 - 100 0.1
Dispex®
Ultra FA 4480
modified fatty alcohol
ethoxylate
80 - - 0.1
Low-molecular-weight Dispersing Agents Designed for Water- and Solvent-based Systems, Conventional Types
Efka®
FA 4671
alkyl ammonium salt of
carboxylic acid
53 100 90 1
High-molecular-weight Dispersing Agents
Dispex®
Ultra PA 4550
modified polyacrylate polymer
dispersing agent, high
molecular weight
50 27 - 1
Dispex®
Ultra PA 4560
molecular weight
40 25 - 1
Dispex®
Ultra PA 4580
molecular weight
40 19 - 1
Dispex®
Ultra PA 4590
molecular weight
40 40 6 20
Dispex®
Ultra PX 4275 copolymer 37.5 - - 0.5
Dispex®
Ultra PX 4575
acrylic block copolymer made
by controlled free radical
polymerization (CFRP)
40 32 0.1
Dispex®
Ultra PX 4585
acrylic block copolymer made
by controlled free radical
polymerization (CFRP)
50 20 - 0.1
Dispersants

Applications
High
PVC
Paints
Matte/Interior
Semi-gloss
Gloss
Wood
Paints
and
Stains
Exterior
and
Elastic
Paints
and
Plasters
Colorants
Low
VOC
Anionic dispersing agent; excellent liquefying effect in inorganic pigment slurry
formulations
Wetting and dispersing agent for aqueous formulations; suitable for organic and
inorganic pigments and pigment concentrates
Dispersing agent for inorganic fillers and pigments; also suitable as co-dispersing
agent with high-molecular-weight dispersing agents; will improve compatibility and
color acceptance of universal colorants in base paints
Dispersing agent for universal decorative colorants for tinting systems; makes
colorants with excellent compatibility and stability
Dispersing agent for inorganic pigments and fillers for decorative and industrial
coatings
Universal, non-ionic wetting and dispersing agent; powerful alternative to APEOs;
improves gloss development, color intensity and color acceptance
Water- and solvent-based systems; strong anti-settling effects
Water-based industrial and automotive coatings, pH-independent, broad compatibility;
suitable for making resin-containing and resin-free pigment concentrates
Water-based decorative and industrial coatings, pH-independent; broad compatibility;
suitable for making resin-containing and resin-free pigment concentrates
High-end industrial and automotive coatings; suitable for making resin-free and
resin-containing pigment concentrates
Water-based industrial and decorative coatings where cost-effective performance
is vital; suited for making universal colorants with good compatibility
High-performance wetting and dispersing agent; specifically designed for semi-
gloss and high-gloss paint formulations and pigment concentrates
Ultra low VOC dispersing agent for water-based systems with benchmark
performance in inorganic pigments; excellent overall performance for organic
pigments; broad compatibility towards different resin systems; designed for
colorants but well suited for grinds into primers, gloss and semi gloss-paints
High-end water-based coatings, industrial and automotive; broad compatibility with
different binder systems; pH-independent; suitable for making resin-free pigment
concentrates
Good Best
Dispersants | 25

Product Name Description Solids (%)
Amine
Number
(mg KOH/g)
Acid Value
(mg KOH/g)
VOC Content
(%)
Recommended for
Low
VOC
Systems*
Water-based
Systems
Solvent-based
Systems
Solvent-free
Systems
Anionic Dispersing Agents Based on Polyacrylic Acid
Dispex®
AA 4030
ammonium polyacrylate
polymer
30 - - 0.1
Dispex®
AA 4040 NS
polymer
43 - - 0.1
Dispex®
AA 4135 NA sodium polyacrylate polymer 35 - - 0.1
Dispex®
AA 4140 NS sodium polyacrylate polymer 45 - - 0.3
Dispex®
AA 4144 sodium polyacrylate polymer 35 - - 0.3
Dispex®
CX 4230
copolymer
28 - - 2.5
Dispex®
CX 4240
copolymer
40 - - 2.0
Dispex®
CX 4320
sodium salt of carboxylic
acid copolymer
25 - - 0.1
Dispex®
CX 4325 sodium polyacrylate copolymer 40 - - 0.3
Dispex®
CX 4340 sodium polyacrylate copolymer 40 - - 0.3
Dispex®
CX 4910
powdered sodium polyacrylate
copolymer
99 - - 0.1
Anionic Dispersing Agents Based on Polyacrylic Acid
Dispex®
Ultra PA 4501 fatty-acid modified polymer 99 - 41 0.2
Dispex®
Ultra PA 4503 75 - - 1
Dispersants

Applications
High
PVC
Paints
Matte/Interior
Semi-gloss
Gloss
Wood
Paints
and
Stains
Exterior
and
Elastic
Paints
and
Plasters
Colorants
Low
VOC
Standard dispersing agent for inorganic fillers and pigments
Standard dispersing agent for inorganic fillers and pigments; low polydispersity
leading to most efficient dispersing properties and liquefying effect
Standard dispersing agent for inorganic fillers and pigments
Medium-hydrophobic dispersing agent for interior and exterior architectural
coatings; good liquefying effect
For inorganic pigments and extenders; more hydrophobic than Dispex®
AA 4040
Excellent dispersing performance, improves gloss, improves wet-scrub resistance,
improves blocking resistance, excellent ZnO- compatibility
For inorganic pigments and extenders; improves gloss, reduces haze
For inorganic pigments and extenders; more hydrophobic than Dispex®
AA 4140
Powder product with excellent properties; can be used in dry preparations
Modified polyester for water and solvent based RMPC, liquid resin for low VOC
pigment concentrates
Self-emulsifying polyester for water-based decorative pigment concentrates; also
improves colorant acceptance in solvent- based alkyd systems
Good Best
Dispersants | 27

Product Name
Solids
(%)
Viscosity (mPa.s)
VOC Content
(%)
Recommended for
Low VOC
Systems*
Water-based
Systems
Solvent-based
Systems
Solvent-free
Systems
Non-ionic Surfactant
Loxanol®
CA 5086 97 ~ 60 3
Loxanol®
CA 5087 99 ~ 60 1
Loxanol®
CA 5120 98 ~ 80 2
Loxanol®
CA 5130 97 ~ 80 3
Propylene Glycol Monoester of Predominantly C-19 Fatty Acids
Loxanol®
CA 5310 98 ~ 30 2
Coalescents
*
Recommended for low-VOC paints and coatings if VOC content 1%.
Measurements done according to the ISO 11890-2 analytical method
defined in the European Paints Directive 2004/42/EC. For products with a
VOC level above 15% the value is based on calculation according to recipe

Features and benefits
Applications
High
PVC
Paints
Matte/Interior
Semi-gloss
Gloss
Wood
Paints
and
Stains
Exterior
and
Elastic
Paints
and
Plasters
Colorants
Low
VOC
High performance, ultra low VOC, coalescing agent for water-borne applications
Excellent balance of coalescent properties
Good Best
Coalescents | 31

Product Name
Solids
(%)
Viscosity
(mPas)
VOC Content
(%)
Tin Free
Recommended for
Low
VOC
Systems*
Water-based
Systems
Solvent-based
Systems
Solvent-free
Systems
Non-associative Thickener: Anionic Polyacrylate Copolymer (ASE)
Rheovis®
AS 1125 NA 25 ~ 17 0.1
Rheovis®
AS 1130 NS 30 ~ 5 1
Rheovis®
AS 1135 30 ~ 5 1
Rheovis®
AS 1188 60 ~ 1.3 1
Rheovis®
AS 1237 30 ~ 5 1
Rheovis®
AS 1337 30 ~ 40 1
Rheovis®
AS 1420 30 ~ 2200 1
Rheovis®
AS 1920 98 _ 1
Associative Thickener: Anionic Polyacrylate Copolymer, Hydrophobically Modified (HASE)
Rheovis®
HS 1152 40 ~ 5 1
Rheovis®
HS 1162 35 ~5 1
Rheovis®
HS 1212 40 ~ 5 0.5
Rheovis®
HS 1332 40 ~5 1
Rheology Modifiers

Applications
High
PVC
Paints
Matte/Interior
Semi-gloss
Gloss
Wood
Paints
and
Stains
Exterior
and
Elastic
Paints
and
Plasters
Colorants
Low
VOC
Non-associative pure acrylic thickener; alkali-swellable emulsion (ASE); low-shear
thickener; highly shear thinning; anti-sagging; high yield point; lower water uptake
Non-associative pure acrylic thickener; highly efficient low-shear thickener; high
shear thinning, anti-sagging and anti-settling; used in pigment and filler slurries but
also highly successful in industrial and automotive formulations for spray applications
Low odor version of Rheovis AS 1130
Non-associative pure acrylic thickener; highly efficient low-shear thickener; for
adhesive and mastics used in pigment and filler slurries but also highly successful
in industrial and automotive formulations for spray applications
Non-associative pure acrylic thickener; mid-shear thickener, provide a Newtonian
rheology profile, allows good leveling
Non-associative pure acrylic thickener; most Newtonian product in the Rheovis®
range
Can be used as protective colloid, works at a pH of 5
Highly effective rheological control thickener for systems which are supplied as
dry systems
Acrylic thickener with associative thickening; low-shear thickener; for paints and
plasters; anti-sagging, prolongs open time
Acrylic thickener with associative thickening; thixotropic flow behavior; low water
uptake; no impact on wet adhesion even after long water contact
Acrylic thickener with associative thickening; mid-shear thickener; improves flow;
excellent efficiency; all around product which can be used in most paint systems
all around product which can be used in most paints systems
Acrylic thickener with associative thickening; high-shear thickener; Newtonian flow
behavior; improved leveling; increases coating build up, layer thickness increases
coating build-up / layer thickness
Good Best
Rheology Modifiers | 35

Rheology Modifiers
Product Name
Solids
(%)
Viscosity
(mPas)
VOC Content
(%)
Tin Free
Recommended for
Low
VOC
Systems*
Water-based
Systems
Solvent-based
Systems
Solvent-free
Systems
Associative Thickener: Hydrophobically Modified Polyether (HMPE)
Rheovis®
PE 1320 NC 40 ~ 1,600 20
Rheovis®
PE 1331 21 ~ 2,300 0.1
Rheovis®
PE 1332 20 ~ 1,100 0.1
Rheovis®
PE 1350 50 ~ 4,000 0.1
Associative Thickener: Hydrophobically Modified Polyether (HMPE)
Rheovis®
PU 1191 30 ~ 2,800 1
Rheovis®
PU 1214 NC 40 ~ 3,500 20
Rheovis®
PU 1215 30 ~ 2,800 1
Rheovis®
PU 1250 40 ~ 3,500 20
Rheovis®
PU 1251 30 ~ 2,800 1
Rheovis®
PU 1291 45 ~ 3,000 1

Applications
High
PVC
Paints
Matte/Interior
Semi-gloss
Gloss
Wood
Paints
and
Stains
Exterior
and
Elastic
Paints
and
Plasters
Colorants
Low
VOC
Excellent high-shear thickener; imparts excellent flow
High-shear thickener; imparts good flow and leveling. Suitable for high gloss paints
Next-generation strong low-shear thickener with excellent performance and easy
handling; strong pseudoplasticity
Mid-shear thickener; nearly Newtonian; excellent balance of high- and low-shear
viscosity build
Mid-shear thickener; medium pseudoplastic
Mid-shear thickener; medium pseudoplastic; provides excellent orientation of
effect pigments
Mid-shear thickener; slightly pseudoplastic
Next generation, ultra low VOC, mid-shear rheology modifier with excellent ICI
thickening and easy handling
Good Best
Rheology Modifiers | 37

Product Name Description
Solids
(%)
Amine
Number
(mg KOH/g)
Recommended for
Low
VOC
Systems*
Water-based
Systems
Solvent-based
Systems
Solvent-free
Systems
Substrate Wetting Agent
Hydropalat®
WE 3111 Polymer based surfactant ~80 1.0
Hydropalat®
WE 3120 Alkoxylated surfactants 99.5 0.5
Hydropalat®
WE 3135 100 0.1
Hydropalat®
WE 3136 100 0.1
Hydropalat®
WE 3155 100 0.1
Hydropalat®
WE 3167 100 0.1
Hydropalat®
WE 3240 Silicone surfactant 48 52
Hydropalat®
WE 3311 Alkoxylated surfactants 100 0.1
Hydropalat®
WE 3317 100 0.1
Hydropalat®
WE 3320 Polymer based surfactant ~90 0.1
Hydropalat®
WE 3322 99 1
Hydropalat®
WE 3323 99 1
Hydropalat®
WE 3475 Sulfosuccinates 75 ~ 6
Hydropalat®
WE 3650 Modifiied alkoxylated 100 0.1
Flow and Leveling Agents
Hydropalat®
WE 3370 Fluorinated polyacrylates 60 10
Slip and Leveling Agents
Efka®
SL 3210 99 1
Efka®
SL 3288 99 1
Efka®
SL 3299 Modified polysiloxanes 99 1
Wetting Agents

Good Best
Applications
High
PVC
Paints
Matte/Interior
Semi-gloss
Gloss
Wood
Paints
and
Stains
Exterior
and
Elastic
Paints
and
Plasters
Colorants
Low
VOC
Alkyl phenol free, proprietary, non-ionic ethoxylate aliphatic alcohol
Low-foaming wetting agent for aqueous formulations; excellent reduction of
dynamic surface tension
A difunctional block copolymer surfactant terminating in primary hydroxyl groups. It
is nonionic and 100% active.
A difunctional block copolymer surfactant terminating in primary hydroxyl groups. It
is nonionic and 100% active.
A water-soluble polyalkylene glycol that is 100% active.
Difunctional block copolymer surfactant terminating in primary hydroxyl groups. A
nonionic surfactants that is 100% active and relatively non toxic.
High performance silicone-based wetting agent; strong reduction of static surface
tension; excellent compatibility
Non-volatile, non-ionic surfactant, which is used in waterborne coatings as a
wetting and dispersing agent for enhanced color development/acceptance and
improved substrated wetting.
Difunctional block copolymer surfactant terminating in primary hydroxyl groups. A
nonionic surfactants that is 100% active and relatively non toxic.
Non-volatile, non-ionic surfactant, which is used in waterborne coatings as a
wetting and dispersing agent for enhanced color development/acceptance and
improved substrated wetting.
Very efficient wetting and leveling agent with anti-foaming properties
Very efficient wetting and leveling agent with anti-foaming properties
Highly efficient sulfosuccinate wetting agent; strong reduction of dynamic surface
tension; standard product used in overprint varnishes
Excellent dynamic surface tension reduction in combination with low foam stabili-
zation
Fluorocarbon-modified polyacrylate; in water-based systems, excellent substrate
wetting, leveling and anti-cratering
Broad spectrum and efficient flow and slip enhancer; economic solutions
Organically modified polysiloxane; strong slip and surface smoothness effect for
high-gloss industrial coatings
Organically modified polysiloxane; strong slip and surface smoothness effect for
high-gloss industrial coatings
Wetting Agents | 41

Product Name Description APEO-free Ammonia-free Low Odor
Opaque Polymer
AQACell®
6299X
Organic opacifying pigment that enables reduction
of titanium dioxide in formulation
Latex
Acronal®
PLUS 4670 Latex that has outstanding titanium dioxide efficiency
Acronal®
EDGE 4750 Latex with high titanium dioxide efficiency
Acronal®
ECO 4830 Latex that delivers improved titanium dioxide efficiency
Acronal®
PLUS 4130 Latex that delivers improved titanium dioxide efficiency
Acronal®
Acronal®
Dispersant
Dispex®
CX 4320 Excellent TiO2 dispersing and stabilizing agent
Dispex®
AA 4144 Excellent TiO2 dispersing and stabilizing agent
Kaolin Extender
Satintone®
5HB Kaolin extender that also contributes to opacity
Mattex®
PRO Kaolin extender that also contributes to excellent hide
Ultrex®
96 Kaolin extender that also contributes to opacity
Opacity Enhancers

Product Name Product Description
Basic Properties
TiO
2
Extension
Opacity
Tint
Strength
Tint
Retention
Gloss
Retention
Sheen
Control
Color
Pigment
Extension
Washability
Stain
Resistance
Scrub
Resistance
Burnish
Resistance
One-coat
Coverage
Hydrous Spray Dried
ASP®
G92
A high gloss kaolin is a micro fine particle-size grade
of aluminum silicate TiO2 extender featuring superior
gloss and high brightness.
ASP®
072
A highly beneficiated very fine particle-size, platy-grade
aluminum silicate, featuring premium brightness. ASP
072 kaolin is chemically inert and has been specially
modified with dispersants for ease of dispersion.
ASP®
172
This kaolin is a very fine particle-size grade of alumi-
num silicate, featuring premium brightness.
ASP®
102
This is a standard brightness spray dried kaolin de-
signed for use in waterborne, semi-gloss coatings.
ASP®
602
This kaolin has fine particle size, standard brightness,
and low residue to help provide excellent dispersion
and physical properties when compounded into a wide
variety of polymeric systems
ASP®
802
ASP®
802 kaolin’s coarse delaminated structure
improves stain resistance and washability in paints. It
also improves mud-crack resistance while reducing
porosity. It provides synergistic properties when used
in combination with calcined kaolin such as Satintone®
W or Mattex®
.
Hydrous Pulverized
ASP®
G90
A high gloss kaolin is a micro fine particle-size grade
aluminum silicate TiO2 extender featuring superior
gloss and high brightness.
ASP®
200 Ultrafine particle size ASP®
200 provides
ASP®
170 Ultrafine particle size ASP®
170 provides
ASP®
400P
Our coarsest particle-size grade of aluminum silicate.
ASP 400P is highly pulverized, is lower in brightness,
has higher aspect ratio than other ASP hydrous kaolins
and is chemically inert.
Kaolin Extenders

Sheens Applications Product Specifications
Flat
Satin
Semi-gloss
High-gloss
General
Use
Primer
Interior
Exterior
Water-borne
Paints
Solvent-borne
Paints
Physical
Form
Surface
Modifications
GE
Brightness
(%
Reflectance)
Screen
Residue
(%
+
325
Mesh)
pH
(28%
Solids)
Median
Sedigraph
Particle
Size
(µ)
Oil
Absorption
(D-281-Rubout)
Loose
Bulk
Density
(lbs/ft
3
/kg/m
3
)
Tamped
Bulk
Density
(lbs/ft
3
/kg/m
3
)
Beads Dispersant 90 0.01 6 to 8 0.2 40-50 44/700 53/930
Beads Dispersant 86 0.01 6 to 8 0.6 35-45 44/700
Beads Dispersant
Pulverized Dispersant 90 0.01 6 to 8 0.2 40-50 12/190 18/290
Pulverized None 86 0.01 3.5 to 5 0.4 40-50 18/290 30/480
Pulverized Dispersant 90 0.01 6 to 8 0.4 40-50 15/240 20/320
Pulverized None 80 0.15 3.5 to 5 3.5 30-40 25/400 40/640
Good Better Best
Kaolin Extenders | 47

Product Name Product Description
Basic Properties
TiO
2
Extension
Opacity
Tint
Strength
Tint
Retention
Gloss
Retention
Sheen
Control
Color
Pigment
Extension
Washability
Stain
Resistance
Scrub
Resistance
Burnish
Resistance
One-coat
Coverage
Delaminated
ASP®
NC X-1
This kaolin’s delaminated structure improves stain
resistance and washability in paints. It is an excellent
titanium dioxide extender and improves opacity of
paints. It provides synergistic properties when used in
combination with calcined kaolins such as Satintone®
W or Mattex®
.
Calcined
Satintone®
5HB
An ultra-fine particle-size grade featuring very high
brightness. Satintone 5HB has been dehydroxylated
by controlled heat treatment for removal of crystal-
line-bound hydroxyl groups and to improve brightness.
Satintone 5HB kaolin is highly pulverized for better
dispersion.
Satintone®
W
A fine particle-size grade featuring high brightness. It
has been dehydroxylated by controlled heat treatment
to remove crystalline-bound hydroxyl groups and to
improve brightness. Satintone W kaolin is highly pulver-
ized for better dispersion.
Mattex®
A fine particle-size grade featuring high brightness. Its
key feature is that it’s a structured calcined material
which allows optimization of low sheen and high
opacity.
Mattex®
PRO
A specially engineered kaolin-based product for
architectural paint applications with improved scrub
resistance and burnish. It is uniquely structured to
provide very high scrub resistance properties and very
low sheen while maintaining excellent hide.
Mattex®
MX
A chemically structured kaolin based pigment that
combines high opacity and whiteness with high tint
strength, low sheen and excellent film integrity in
coatings.
Ultrex®
96
An ultra-fine particle-size engineered grade featuring
ultra-high brightness. It has been dehydroxylated
by controlled heat treatment for removal of crystal-
line-bound hydroxyl groups and to improve bright-
ness. Ultrex 96 kaolin is highly pulverized for better
dispersion.
Kaolin Extenders

Sheens Applications Product Specifications
Flat
Satin
Semi-gloss
High-gloss
General
Use
Primer
Interior
Exterior
Water-borne
Paints
Solvent-borne
Paints
Physical
Form
Surface
Modifications
GE
Brightness
(%
Reflectance)
Screen
Residue
(%
+
325
Mesh)
pH
(28%
Solids)
Median
Sedigraph
Particle
Size
(µ)
Oil
Absorption
(D-281-Rubout)
Loose
Bulk
Density
(lbs/ft
3
/kg/m
3
)
Tamped
Bulk
Density
(lbs/ft
3
/kg/m
3
)
Spray
Dried
Dispersant 87 0.01 6 to 8 0.7 40-50 40/650 55/890
Pulverized Dehydroxylated 92 0.01 5 to 7 0.8 85-95 13/210 20/320
Pulverized Dehydroxylated
Good Better Best
* Pre-Treatment Value
Kaolin Extenders | 49

UV Absorbers
Product Name Chemistry
Physicochemical Parameters
Physical Form
Mw
(g/mol)
Mp
(°C)
2-hydroxy-benzophenone UVA (BP)
Chimassorb®
81 BP solid 326 47 - 51
Chimassorb®
90 BP solid 228 61 - 65
2-(2-hydroxyphenyl)-benzotriazole UVA (BTZ)
Tinuvin®
1130 BTZ liquid mix -
Tinuvin®
326 BTZ-Cl solid 316 138 - 142
Tinuvin®
384-2 BTZ liquid 95% in 1-methoxy-2-propyl acetate 452 -
Tinuvin®
99-2 BTZ liquid 95% in 1-methoxy-2-propyl acetate 452 -
Tinuvin®
900 BTZ solid 448 138 - 142
Tinuvin®
928 BTZ solid 442 109 - 113
Tinuvin®
Carboprotect®
BTZ solid 560 132 - 136
Bis- and Tris-resorcinyl-triazine UVA (HPT), High Photo and Thermal Permanence
Tinuvin®
460 HPT solid 630 97 - 101
Tinuvin®
477 HPT liquid 80% in 2-methoxy-1-propyl acetate mix -
Bis- and Tris-resorcinyl-triazine UVA (HPT), High Photo and Thermal Permanence
Tinuvin®
400 HPT liquid 85% in 1-methoxypropan-2-ol 647 -
Tinuvin®
405 HPT solid 584 73 - 77
Tinuvin®
479 HPT solid 678 39 - 43 1

Market Segment
Application / Remarks
Automotive
and
Transportation
Industrial
Furniture
and
Flooring
Printing
and
Packaging
Architectural
Mass stabilization of gel coats; UVA for moderate durability requirements
Mass stabilization of gel coats; UVA for moderate durability requirements
Universal UVA for medium-performance solvent- and water-based coatings
Chlorinated red-shifted UVA, allows 1% transmittance up to 370 nm; FDA approval for indirect food contact in
polyolefines, limited solubility in organic solvents
Multipurpose UVA for medium- to high-durability requirements; minimum color impact in refinish clear coat
applications
Multipurpose UVA for medium-durability requirements
UVA for medium- to high-durability requirements in powder and coil coating applications; limited solubility in
organic solvents
UVA for medium- to high-durability requirements in powder and coil coating applications; excellent solubility in
organic solvents
Very red-shifted UVA for protection of aromatic epoxy systems; especially recommended for carbon- or
glass-fiberreinforced composites; allows 1% transmittance up to 420 nm
Red-shifted UVA with extremely high extinction coefficient; allows 1% transmittance up to 370 nm; limited solubility
Red-shifted UVA with high extinction coefficient; for high-durability requirements; allows 1% transmittance
UVA for high-durability requirements in clear coat applications inclusive UV-curing systems; excellent spectral coverage in
combination with Tinuvin®
479
UVA for high-durability requirements in powder clear coats or 100 % (UV)-curing systems; excellent spectral coverage in
combination with Tinuvin®
479
UVA with extremely high extinction coefficient; for highest durability requirements in clear coats, powder coatings or UV-curing
systems; specifically suited for thin-film applications
UV Absorbers | 53

UV Absorbers
Product Name Chemistry Physical Form
Market Segment
Automotive
and
Transportation
Industrial
Furniture
and
Flooring
Printing
and
Packaging
Architectural
Blends
Tinuvin®
5050 BTZ / N-alkyl HALS liquid
UVA/HALS blend for solvent-based appli-
cations
Tinuvin®
5060 BTZ / N-OR HALS liquid
UVA/non-basic HALS blend for sol-
vent-based oxidative curing coatings
Tinuvin®
5151 BTZ / N-alkyl HALS liquid
universal UVA/HALS blend for water- and
solvent-based applications
Tinuvin®
5248 HPT / N-alkyl HALS liquid
UVA/HALS blend for high-performance
Tinuvin®
5251 HPT / N-alkyl HALS liquid
UVA/HALS blend for high-performance
Tinuvin®
111 FDL
N-alkyl / N-alkyl
HALS blend
solid
HALS blend for powder coating application
with triboelectric charging activity
Tinuvin®
B 75
AO / N-alkyl HALS
/ UVA
liquid
AO/UVA/HALS blend for solvent-based
applications; improves color stability of
epoxy based flooring coatings
NEAT Additive Preparations for Water-based Applications
Tinuvin®
123-DW N-OR HALS liquid 30 % active
N-OR based HALS for all water-based
applications
Tinuvin®
99-DW BTZ liquid 25 % active
UVA for water-based medium-performance
applications
Tinuvin®
400-DW HPT liquid 20 % active
Blue-shifted UVA for water-based high-per-
formance applications; excellent spectra
coverage in combination with Tinuvin®
479-DW
Tinuvin®
477-DW HPT liquid 20 % active
Red-shifted UVA for water-based high-per-
formance wood coatings
Tinuvin®
5333-DW UVA HALS liquid 40 % active
High-performance UVA / non-reacting HALS
light stabilizer blend with broad spectral
coverage for high-durability requirements
in joinery, GIP, plastic, glass and decorative
applications

Product Name Chemistry
Physicochemical parmeters
Physical Form
Mw
(g/mol)
Mp
(°C)
Lignin Stabilizer
Lignostab®
1198 lignin stabilizer solid 172 66 - 70
Lignostab®
1198 L lignin stabilizer solution
liquid
20 % in water
172 -
Non-basic HALS
Tinuvin®
123 N-OR HALS liquid 737 -
Tinuvin®
152 N-OR HALS solid 757 72 - 761
Tinuvin®
622 SF oligomeric N-alkyl HALS solid 3.100 - 4.000 57 - 61 1
Tinuvin®
5100 N-OR HALS liquid 737 -
Basic HALS
Tinuvin®
111 FDL N-alkyl / N-alkyl HALS blend solid n.a. n.a.
Tinuvin®
770 DF N-H HALS solid 480 81 - 85
Tinuvin®
292 N-alkyl HALS liquid 509 / 370 -
Tinuvin®
292 HP N-alkyl HALS liquid 509 / 370 -
Hindered Amine Light Stabilizers (HALS)

Market segment
Automotive
and
Transportation
Industrial
Furniture
and
Flooring
Printing
and
Packaging
Architectural
Lignin stabilizer for wood impregnation
Lignin stabilizer solution for wood impregnation
Non-basic HALS for acid-catalyzed coatings, improves yellowing resistance in direct fired gas
ovens
Non-migrating, reactable low-basic HALS for polar solvent-based or plastic coatings (e.g.,
polycarbonate, ABS substrates)
Low-basic HALS for powder coating applications with very good antioxidant property; limited
solubility in organic solvents
Non-basic HALS for oxidative curing coatings
HALS blend for powder coating applications with triboelectric charging activity
HALS suitable for powder coating applications
Multipurpose HALS for various applications multipurpose HALS for color-sensitive applications
such as refinish coatings
Performance Additives | 57

Product Name CAS Chemistry
Physicochemical Parmeters
Physical Form
Mw
(g/mol)
Mp
(°C)
Antimicrobials
Irgaguard®
D 1071 28159-98-0 organic algicide solid 253 128 - 133
Irgarol®
1051 28159-98-0 organic algicide solid 253 129 - 133
Optical Brightener
Tinopal®
NFW LIQ 27344-41-8 biphenyl-stilbene liquid 563 -
Tinopal®
OB CO 7128-64-5 benzoxazole solid 431 196 - 203
Tinopal®
SFP 41098-56-0 triazine-stilbene solid 1,305 -
Optical Brighteners

Market Segment
Automotive
and
Transportation
Industrial
Furniture
and
Flooring
Printing
and
Packaging
Architectural
Triazine-based algicide for architectural and construction coatings. Due to REACH, not available in Europe.
Triazine-based algicide for antifouling in marine and protective coatings
Liquid OB for water-based white and pastel-tone paints, clear coats, overprint varnishes
Solid OB for white and pastel-tone paints, clear coats, overprint varnishes and powder coating applications
Water-soluble OB for photographic color developer baths or as fluorescent tracers
Performance Additives | 59

Notes

About the Dispersions Resins Division
The Dispersions Resins Division in North America offers a comprehensive portfolio of resins, binders, latex, colorants, and systems to meet
specific application needs for the coatings, construction, printing and packaging and plastics markets. Our innovative products also help man-
ufacturers in the adhesives, nonwovens and fiber bonding industries meet functional and performance demands. Our formulation additives,
rheology modifiers, light stabilizers, photoinitiators, and antioxidants significantly enhance the existing BASF product portfolio for these markets.
For more information about BASF’s Dispersions Resins Division, visit www.basf.us/dpsolutions.
About BASF
At BASF, we create chemistry for a sustainable future. We combine economic success with environmental protection and social responsibility.
The approximately 112,000 employees in the BASF Group work on contributing to the success of our customers in nearly all sectors and almost
every country in the world. Our portfolio is organized into five segments: Chemicals, Performance Products, Functional Materials Solutions,
Agricultural Solutions and Oil Gas. BASF generated sales of more than €70 billion in 2015. BASF shares are traded on the stock exchanges
in Frankfurt (BAS), London (BFA) and Zurich (AN). Further information at www.basf.com.
United States and Canada
BASF Corporation
11501 Steele Creek Road, Charlotte, NC 28273
Phone: 800-251-0612
Fax: 704-587-8224
Email: dpsolutions@basf.com
Web: www.basf.us/dpsolutions
Mexico
BASF Mexicana, S.A. de C.V. Av. Insurgentes Sur 975
Col. Ciudad de los Deportes 03710 Mexico, D.F.
Phone: 52-55-5325-2600
Fax: 52-55-5723-3011
Email: contactoed@basf.com
Web: www.basf.com.mx
While the descriptions, designs, data and information contained herein are presented in good faith and believed to be accurate, they are provided for guidance only. Because many
factors may affect processing or application/use, BASF recommends that the reader make tests to determine the suitability of a product for a particular purpose prior to use. NO WAR-
RANTIES OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
ARE MADE REGARDING PRODUCTS DESCRIBED OR DESIGNS, DATA OR INFORMATION SET FORTH, OR THAT THE PRODUCTS, DESCRIPTIONS, DESIGNS, DATA OR INFORMATION
MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. In no case shall the descriptions, information, data or designs provided be considered a
part of BASF’s terms and conditions of sale. Further, the descriptions, designs, data and information furnished by BASF hereunder are given gratis and BASF assumes no obligation or
liability for the descriptions, designs, data or information given or results obtained, all such being given and accepted at the reader’s risk.
© BASF SE 2016. All rights reserved. 04/16
Acronal, ASP, Dispex, Foamaster, FoamStar, Quick-Trigger, Rheovis, Hydropalat, Loxanol and Ultrex are registered trademarks of BASF SE.

2016_BASF_ArchitecturalCoatingsBrochure_EL.pdf

Recommended

Recommended

More Related Content

Similar to 2016_BASF_ArchitecturalCoatingsBrochure_EL.pdf

Similar to 2016_BASF_ArchitecturalCoatingsBrochure_EL.pdf (20)

Recently uploaded

Recently uploaded (20)

2016_BASF_ArchitecturalCoatingsBrochure_EL.pdf