Aramco approved vendor list 2015

Material Sourcing List
Region 1: Saudi Arabia and GCC Countries
1
Item Category Material Description Material Long Description
Material Number
9COM/9CAT
1
Chemicals
(Drilling Fluids)
POLYVINYL/POLYACRYLIC
COMPOUNDS TO 400F
ADMIXTURE: DRILLING MUD; 25 KG PAPER SACKS; SHIPMENT OF PRODUCT SHALL
CONFORM TO SAUDI ARAMCO EXPORT ADMIXTURE DRILLING MUD; POWDER
FORM,POLYACRYLIC,FOR FILTRATE REDUCER FLUID LOSS ADDITIVE,CO-POLYMER
OF POLYVINYL COMPOUNDS,25 KG OR 50 LB BAG,API 13A,HIGH TEMPERATURE
ENVIRONMENT 150 DEG C (300 DEG F) TO 205 DEG C (400 DEG F), SHIPMENT OF
PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL
NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER)
SHALL BE AS FOLLOWS: 1ST PLY 50 LB MIN. NATURAL KRAFT PAPER (INTERIOR
PLY) 2ND PLY 50 LB MIN. NATURAL KRAFT PAPER 3RD PLY SEPARATE INNER BAG
LINER, HIGH DENSITY ORIENTED AND CROSS-LAMINATED INNER LINER (TUBULAR
SHAPE) MADE OF POLYETHYLENE RESIN MATERIAL WITH A MINIMUM WALL
THICKNES OF 0.1 MM. 4TH PLY 50 LB MIN. NATURAL KRAFT PAPER. 5TH PLY 60 LB
MIN. NATURAL KRAFT PAPER WET STRENGTH (EXTERIOR PLY) THE BAG MUST BE
VALVE/SPOUT TYPE, COMPLETELY SEALED, MOISTURE AND WATER PROOF.
1000021602
Vendor Liaison Group (VLG)/Supplier Registration Unit
Room A-119, Saudi Aramco Box 87 - North Park 1
Dhahran 31311, Kingdom of Saudi Arabia
Phone: +966-13-874-0799 ; General Line: +966-13-874-0958; Fax: +966-13-874-0015/0335
Email: Vendor-registration@aramco.com; OR On-line registration: https://onboarding.aramco.com
2015 1Saudi Aramco: Company General Use

Material Number
9COM/9CAT
2
Chemicals
(Drilling Fluids)
LIQUID GILSONITE
GILSONITE: LIQUID GILSONITE; BORE HOLE STABILIZING AND FLUID LOSS
CONTROL AGENT ADMIXTURE DRILLING MUD; BLEND OF DISPERSED COUPLED
GILSONITE AND LIGNITE FORM,SUSPENDED SURFACTANT LIQUID,FOR BOREHOLE
STABILIZING, AND FLUID LOSS CONTROL AGENT PRIMARY FUNCTION IS TO
PREVENT STUCK PIPE, REDUCE FLUID LOSS AND CREATE STRONG BOREHOLE
CONDITIONS WITH EXCEPTIONAL HTHP AND DYNAMIC FLUID LOSS CONTROL,
NON- TOXIC, ENVIRONMENTALLY SAFE ALSO FUNCTIONS AS A SHALE STABILIZER
AND HAS A BROAD PSD FOR SEALING MICRO- FRACTURES. NON SHEENING,55
GAL/DRUM,APPEARANCE, BLACK SUSPENSION.FREEZING POINT, -4 F(-20 C)TO -13
F(-25C). FLASH POINT,F, >200. SOLUBILITY IN WATER, MISCIBLE. LUBRICITY TEST,
TORQ REDUCTION :5% AND 12% AT 4 PPB RESPECTIVELY IN STANDARD SAUDI
ARAMCO WATER BASE MUD SYSTEM, USING OFI MODEL EP/LUBRICITY TESTER.
FILTRATION CONTROL, API FILTRATE LOSS:6.0 ML/30MIN AT 4PPB HTHP FILTRATE
LOSS AT 250 F AND 500 PSI:16 ML/30MIN AT 8PPB SHALE ACCRETION TEST, <5%
IN STANDARD SAUDI ARAMC KCL POLYMER MUD. AT 8 PPB IN STANDARD KCL
POLYMER MUD:1. IMPROVE HTHP FLUID LOSS: 20% MINIMUM AT 250 F AND 500
PSI 2. IMPROVE LUBRICITY: 15% MINIMUM, BY USING OFI MODEL EXTREME
PRESSURE (PE)/LUBRICITY TESTER 3. SHALE ACCRETION TEST, <5%.
1000021608
3
Chemicals
(Drilling Fluids)
ZINC OXIDE
ADMIXTURE: DRILLING MUD; 50 LB BAG; ADMIXTURE DRILLING MUD; FINE
POWDER FORM,ZINC OXIDE (ZNO), 90% (MINIMUM) PURE, SP. GR.,5.5,FOR
HYDROGEN SULFIDE SCAVENGER FOR DRILL PIPE CORROSION PROTECTION IN
FRESH WATER OR BRINE FOR DRILLING & COMPLETION OPERATIONS,25 KG OR 55
LB BAGS,API 13A.
1000021671
4
Chemicals
(Drilling Fluids)
MUTUAL SOLVENT
AGENT: WELL STIMULANT; SURFACE TENSION REDUCER; SOLUBLE IN
HYDROCARBONS; DISPERSIBLE IN FRESH AGENT WELL STIMULANT; FOR SURFACE
TENSION REDUCER FOR HYDROFLUORIC ACID SOLUTION ADDITIVES,ETHYLENE
GLYCOL MONOBUTYL ETHER MUTUAL SOLVENT,LIQUID FORM,55 GAL
DRUM,SOLUBLE IN HYDROCARBONS, DISPERSIBLE IN FRESH WATER, ACID &
BRINE, 150 DEG F FLASH POINT (TOC).
1000021973
5
Chemicals
(Drilling Fluids)
THINNER OBM
ADDITIVE DRILLING FLUID; LIQUID FORM,POLYOLEFIN/ORGANIC SULFONATE
BLEND, FATTY ACID DERIVATIVES OR OTHER CHEMICAL THAT DO SAME
FUNCTION.,FOR TO LOWER REHEOLOGICAL PROPERTIES FOR SYNTHETIC OR OIL
BASE FLUIDS.,55 GALLON DRUM,APPEARANCE: AMBER LIQUID, COLOUR: DARK
AMBER, ODOUR/TASTE: SLIGHT, S.G: 0.9-0.96, INSOLUBLE, FLASH POINT: MORE
THAN 190 F DEG.
1000823699

Material Number
9COM/9CAT
6
Chemicals
(Drilling Fluids)
OIL WETTING AGENT
ADMIXTURE, DRILLING MUD: INVERTED EMULSION MUD COMPONENTS,
DRILTREAT (STABILIZER), AMBER-COLOR VISCOUS ADMIXTURE DRILLING MUD;
VISCOUS LIQUID, AMBER COLOR FORM,ORGANIC SURFACTANT OIL-WETTING
AGENT,FOR OIL BASE MUDS,5 GAL /PAIL,AN ORGANIC SURFACTANT OIL-WETTING
AGENT FOR OIL BASE MUDS. ITS PRIMARY FUNCTION IS TO ACT AS AN OIL-WET
WEIGHTING MATERIAL AND DRILL SOLIDS TO PREVENT WATER WET SOLIDS, TO
IMPROVE FILTERATION CONTROL, RHEOLOGICAL STABILITY AND EMULSION
STABILITY. NORMAL TREATMENTS RANGE 0.25 û 2.0 LBS/BBL DIRECTLY TO THE
SYSTEM AND IT IS TEMPERATURE STABLE GREATER THAN 350 DEG F (176 DEG C).
PHYSICAL APPEARANCE: AMBER COLOR, VISCOUS LIQUID. SG: 0.93 û 1.0. FLASH
POINT: > 200 DEG F (93 DEG C) BY PMCC.
1000022171
7
Chemicals
(Drilling Fluids)
ORGANOPHILIC LIGNITE
ADMIXTURE, DRILLING MUD: INVERTED EMULSION MUD COMPONENTS OIL-
DISPERSIBLE ORGANOPHILIC LEONARDITE 25 KG (50 LB) ADMIXTURE DRILLING
MUD; 25 KG (55 LB) BAG,INVERTED EMULSION MUD COMPONENTS, OIL-
DISPERSIBLE ORGANOPHILIC LEONARDITE, 25 KG (55 LB) BAG: MOISTURE GRATER
THAN 8% WT. PARTICLE SIZE 100% WT PASSING THROUGH 70 US MESH
IMPURITIES (SAND, LIME, GYPSUM-..ETC) 2% WT, MAX.
1000022172
8
Chemicals
(Drilling Fluids)
SECONDARY EMULSIFIER
POLYAMINATED FATTY ACID & PARTIAL AMIDE OF ADMIXTURE DRILLING MUD;
BLEND OF POLYAMINATED FATTY ACID & PARTIAL AMIDE OF POLYAMINE WITH
METHANOL,FOR SECONDARY EMULSIFIER AND WETTING AGENT FOR INVERTED
EMULSION DRILLING FLUIDS,55 GAL PER DRUM,SECONDARY EMULSIFIER AND
WETTING AGENT FOR INVERTED EMULSION DRILLING FLUIDS. A BLEND OF
POLYAMINATED FATTY ACID AND PARTIAL AMIDE OF POLYAMINE WITH
METHANOL, AUTHORIZED SAUDI ARAMCOÆS PERSONNEL WILL CARRY OUT
SAMPLING AND TESTING AS NEEDED. SPECIFIC GRAVITY @ 77 DEG F (25 DEG C)
0.95 - 0.96 FLASH POINT: HIGHER THAN 149 DEG F (65 DEG C) ACTIVE
INGREDIENTS: A. FATTY ACID & AMINE DERIVATIVES 65 - 70% B. ASPHALTIC-TYPE
MATERIAL NONE C. ACID NUMBER, 45 - 50 MG KOH/G.
1000022173

Material Number
9COM/9CAT
9
Chemicals
(Drilling Fluids)
PRIMARY EMULSIFIER
OXIDIZED TALL OIL & POLYAMINATED FATTY ACID, CLEAR, ADMIXTURE DRILLING
MUD; CLEAR FORM,A BLEND OF OXIDIZED TALL OIL AND POLYAMINATED FATTY
ACID,FOR PRIMARY EMULSIFIER FOR INVERTED EMULSION DRILLING FLUIDS,55
GAL PER DRUM,SPECIFIC GRAVITY @ 77 DEG F (25 DEG C) 0.94 - 0.95 FLASH
POINT: HIGHER THAN 149 DEG F (65 DEG C) ACTIVE INGREDIENTS: A: OXIDIZED
TALL OIL & FATTY ACID 65 - 70% B: ASPHALTIC-TYPE MATERIAL NONE C: ACID
NUMBER, 80 - 85 MG KOH/G.
1000022175
10
Chemicals
(Drilling Fluids)
LIQUID SPOTTING FLUID
ADMIXTURE, DRILLING MUD: INVERTED EMULSION MUD COMPONENTS, TO FREE
STUCK PIPES (EMULSIFIER), SPECIAL BLEND OF LIQUID, ADMIXTURE DRILLING
MUD; LIQUID FORM,SPOTTING FLUID,FOR SOAK SOLUTION FOR FREEING STUCK
PIPE,ORGANIC CHEMICAL CONCENTRATE OF EMULSIFIERS AND LUBRICANTS,208
L OR 55 GAL DRUM,CONCENTRATE TO BE MIXED WITH DIESEL OIL OR MINERAL
OIL TO FORM STABLE INVERT EMULSION TO HELP FREE DIFFERENTIALLY STUCK
PIPE. FLASH POINT: >190 DEG F.
1000022178
11
Chemicals
(Drilling Fluids)
FIBER, SWEEPING AGENT
ADMIXTURE: DRILLING MUD; WELLBORE CLEANING AGENT DRY PILLS, TREATED
POLYMERIZED SYNTHETIC FIBER; HOLE CLEANING AGENT ADMIXTURE DRILLING
MUD; DRY FORM,TREATED SYNTHETIC POLYPROPYLENE FIBER,FOR
TRANSPORTING DRILL CUTTINGS METAL SHAVINGS AND OTHER DEBRIS OUT OF
WELLBORE WHILE DRILLING,15 LBS PAIL,EASILY DISPERSABLE IN ALL DRILLING
FLUIDS, NON TOXIC, NON-CORROSIVE, NON-MAGNETIC, CHEMICALLY INERT AND
TEMPERATURE STABLE. COMPATIBLE IN WATER, DIESEL AND MINERAL OIL
FLUIDS. SPECIFIC GRAVITY, 0.9.
1000720919
12
Chemicals
(Drilling Fluids)
LUBRICANT - HIGH PH AND
DIVALENT BRINES
ADMIXTURE DRILLING MUD; CLEAR LIQUID FORM,WATER SOLUBLE
LUBRICANT,FOR REDUCES TORQUE, DRAG AND FRICTION IN WATER BASED
DRILLING MUDS,ND OF SURFACTANT MIXTURES POLYOLS DESIGNED FOR USE AS
MIUM LUBRICANT COMPATIBLE IN HIGH SALINE FLUIDS INCLUDING SATURATED
NACL, KCL, NABR, K-FORMATE CALCIUM CHLORIDE FLUIDS WITHOUT GREASING
OUT AND/OR CHEESING. STABLE OVER WIDE RANGE OF TEMPERATURE UP TO
325 F DEG. THE NORMAL (PMCC).
1000757580

Material Number
9COM/9CAT
13
Chemicals
(Drilling Fluids)
LUBRICANT SALT WATER MUD
AND BRINE
LUBRICANT; DRILLING MUD, ADDITIVE TYPE,AMBER LIQUID FORM,55
GAL/DRUM,LUBRICANT FOR SALT WATER BASED MUD AND BRINES, DISPERSED,
SEA WATER, SALT SATURATED, FORMATS, COMPLETION, WORKOVER FLUIDS.
USED WITH BRINES, ALSO, RECOMMENDED FOR DRILL-IN FLUIDS CONTAINING
HIGH AMOUNT OF SIZEABLE CALCIUM CARBONATE, SODIUM CHLORIDE OR
CALCIUM CHLORIDE.PHYSICAL STATE @ 20 C DEG: AMBER COLOR, FAINT ODOR,
POUR POINT IS -10 C DEG MAX, SP. GR. 1.002 G/CC, VISCOSITY @ 40 C DEG IS 120
MM2/S, FLASH POINT 230 C DEG, INSOLUBLE IN WATER, DOES NOT FORM
GREASING AND IT DOES NOT PHASE OUT. BOTTOM HOLE TEMP. LIMIT: 160 C
DEG(320 F), PH LIMIT MAX 10.5, REDIAGREEN EME SALT IS A MIXTURE OF FATTY
ACID, C1618 AND C18-UNSATURATED COMPOUNDS WITH 2,2,2-NITRILOTRI-
ETHANOL AND FATTY ACIDS, ESTERS WITH POLYOL. OTHER ASSOCIATED
ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY
AFFECTED FLUID PROPERTIES.
1000774613
14
Chemicals
(Drilling Fluids)
OIL IN WATER EMULSIFIER
ADMIXTURE DRILLING MUD; THICK LIQUID FORM,FOR EFFECTIVELY EMLSIFIES
HYDROCARBONS IN BOTH FRESH & SALT WATER. USE IN LOW DENSITY OIL IN
WATER BENTONITE MUD EMULSION,55 GAL (208 LITER) DRUM,OTHER
ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR
ADVERSELY AFFECT FLUID PROPERTIES.
1000779780

Material Number
9COM/9CAT
15
Chemicals
(Drilling Fluids)
MODIFIED NON-IONIC STARCH
ADMIXTURE DRILLING MUD; WHITE, FREE-FLOWING POWDER FORM,STABILIZED
NON-IONIC STARCH DERIVATION,FOR TO CONTROL HIGH PRESSURE AND HIGH
TEMPERATURE FILTRATION CONTROL AND MINIMIZE DAMAGE TO THE
PRODUCTIVE FORMATION,MODIFIED STARCH 60-100%, SOLID, WHITE, SG 1.5,
STABILITY TEMPERATURE: 250 DEG F, BIODEGRADABLE, SOLUBLE IN WATER,50 LB
(22.7 KG) SACK,ENHANCES THE LOW SHEAR RATE VISCOSITY OF A FLUID
CONTAINING XANTHAN GUM BIO-POLYMER. POLYMER COMBINATION IS
SYNERGISTIC AND YIELDS IMPROVED STATIC SUSPENSION. FLUID COMPOSITIONS
MIXED WITH N-DRIL HT PLUS FILTRATION CONTROL AGENT CAN BE USED TO
DRILL INTO PAY ZONES AND UNDER REAM. IT CAN ALSO BE USED AS 'PRE' AND
'POST' GRAVEL PACK FLUID AND AS LOST CIRCULATION PILLS. SUITABLE FOR ALL
WATER-BASED DRILLING FLUIDS, WORKOVER AND COMPLETION FLUIDS
INCLUDING SEAWATER, POTASSIUM CHLORIDE, MAGNESIUM CHLORIDE SODIUM
CHLORIDE, SODIUM BROMIDE, CALCIUM BROMIDE AND ZINC BROMIDE: RESISTS
CALCIUM CONTAMINATION OVER A WIDE PH RANGE, SOLUBLE IN ACIDS AND
OXIDIZERS CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME,
MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH NUMBER.
1000788390
16
Chemicals
(Drilling Fluids)
CALCIUM CARBONATE FLAKE
FINE
ADMIXTURE DRILLING MUD; FINE WHITE FLAKES FORM,SIZED CALCIUM
CARBONATE FLAKES,FOR USED AS BRIDGING AGENT TO CONTROL DRILLING
FLUID CIRCULATION LOSSES ESPECIALLY IN GAS DRILLING,CALCIUM CARBONATE
60-100 WT% AND CRYSTALLINE SILICA UP TO 0.1 WT%,MULTI-WALLED 50 LB PER
BAG,WHITE FLAKES, SG:2.7-2.8 AT 20 DEG, ACID SOLUBILITY(10-15% HCL)99%
MIN.
1000813534
17
Chemicals
(Drilling Fluids)
MEDIUM
ADMIXTURE DRILLING MUD; MEDIUM WHITE FLAKES FORM,SIZED CALCIUM
BAG,WHITE FLAKES, SG:2.7-2.8 AT 20 DEG, ACID SOLUBILITY(10-15% HCL)99%
MIN.
1000813690
18
Chemicals
(Drilling Fluids)
COARSE
ADMIXTURE DRILLING MUD; COARSE WHITE FLAKES FORM,SIZED CALCIUM
BAG,WHITE FLAKES, SG:2.7-2.8 AT 20 DEG, ACID SOLUBILITY (10-15% HCL) 99%
MIN.
1000813535

Material Number
9COM/9CAT
19
Chemicals
(Drilling Fluids)
TEMPERATURE
EXTENDER/STABILIZER
ADDITIVE DRILLING FLUID; LIQUID FORM,AMINOETHANOL,FOR POLYMER
TEMPERATURE EXTENDER/STABILIZER FOR WATER BASED DRILLING AND
COMPLETION FLUIDS BY REDUCING THE RATE OF BREAKDOWN OF POLYMERS BY
SLOWING/PREVENTING THE THERMAL DEGRADATION OF THE POLYMERS. THIS
GIVES A PRONOUNCED IMPROVEMENT IN TEMPERATURE STABILITY, ENABLING
POLYMER FLUIDS TO BE USED IN HOTTER WELLS. THE TEMPERATURE STABILITY
INCREASE BY MARGIN OF UP TO 70 DEG F. IT IS PARTICULARLY SUITED FOR USE IN
DRILLING, COMPLETION, WORKOVER AND PACKER FLUIDS.,55 GAL PER
DRUM,PPEARANCE: LIQUID COLOUR : COLORLESS GRAVITY :1.0- 1.02 ADD
SOLUBILITY IN WATER: SOLUBLE IN WATER BOILING POINT (C):> 142 C FLASH
POINT (C) : > 96 C PH : 11-12,CONTAINER MUST BE PROPERLY LABELED WITH
VENDOR'S NAME, MANUFACTURER'S NAME, GRAVITY: 1.0 - 1.02 LOCATION,
PRODUCTION DATE AND BATCH NUMBER. SAUDI SOLUBILITY IN WATER:
ARAMCO'S PERSONNEL WILL SOLUBLE IN WATER, BOILING CARRY OUT PROPER
SAMPLING POINT: > 142 DEG C, FLASH AND TESTING AS NEEDED. POINT: > 96
DEG C, PH: 11 - 12.
1000829739
20
Chemicals
(Drilling Fluids)
Temperature Stabilizer
ADDITIVE; DRILLING MUD TYPE,FOR FREE RADICAL SCAVENGER AND
TEMPERATURE STABILIZER,COLORLESS LIQUID FORM,200
LITERS/DRUM,FUNCTIONS BY SCAVENGING FREE RADICALS AND SLOWS DOWN
THERMAL DEGRADATION OF POLYMERIC COMPONENTS, SUCH AS XANTHAN
GUM, PAC AND STARCH, IN THE DRILLING FLUID WHICH ALLOWING THE
TEMPERATURE STABILITY TO BE EXTENDED BY UP TO 50 DEG F. NORMAL
TREATMENT: 2.0 TO 4.0 LB/BBL FLASH POINT : > 195 DEG. F, SPECIFIC GRAVITY :
1.05-1.15, SOLUBILITY : SOLUBLE IN WATER, ACTIVES % W/W 68 - 72, SG @ 20° C
1.05 - 1.15.
1000823316
21
Chemicals
(Drilling Fluids)
POLYSTYRENE COPOLYMER
BEADS
ADMIXTURE: DRILLING MUD; DRY, LUBRA-GLIDE BEADS; DIVINYL BENZENE
COPOLYMER; DRY, COARSE GRADE; FOR REDUCING TORQUE AND DRAG.
ADMIXTURE DRILLING MUD; DRY, COARSE FORM,AA POLYSTYRENE COPOLYMER
BEAD,FOR SOLID LUBRICANT, TO REDUCE TORQUE AND DRAG WHILE DRILLING.
CHEMICALLY INERT,22.7 KGS (55 LBS) /SACK,PARTICLE SIZE DISTRIBUTION RANGE:
100 TO 1000 MICRON. COMPRESSIVE STRENGTH: 16,000 PSI. SOFTENING
TEMPERATURE: > 260 C DEG.
1000720918

Material Number
9COM/9CAT
22
Chemicals
(Drilling Fluids)
GUAR GUM POWDER FORM 25
KG BAG
ADDITIVE DRILLING FLUID; CREAMY COLOURED POWDER FORM,PURE GUAR
GUM,FOR USED AS COMPETITIVE SUPPLEMENTARY VISCOSIFIER FOR QUICK
VISCOSITY SWEEPS BUILDER WHILE DRILLING SURFACE HOLES WITH WATER.,25
KG METAL BAGS,IT IS PARTICULARLY USEFUL FOR OFFSHORE DRILLING, AS IT CAN
BE ADDED DIRECTLY TO SEAWATER, , WHICH ELIMINATES THE NEED FOR LARGE
QUANTITIES OF FRESH WATER AS WELL AS THE TIME REQUIRED TO PREHYDRATE
BENTONITE. IT IS AN UNTREATED GUAR GUM AND IS NON-IONIC IN NATURE. IT
SHOWS EXCELLENT PERFORMANCE OVER A WIDE PH RANGE. IT'S
RECOMMENDED TO ADD BIOCIDE, IF GUAR GUM SOLUTION KEPT OVER A PERIOD
OF TIME. APPEARANCE: CREAMY COLOURED POWDER, ODOR: BEAN LIKE,
MOISTURE: 8.0% (MAXIMUM), PH: 8.0, ASH :1% (MAXIMUM), PARTICLE SIZE
THROUGH 200 MESH (75 MICRON): 95% (MINIMUM), BROOKFIELD VISCOSITY :
8000 CP (MINIMUM), (1% SOLUTION IN DISTILLED WATER AT 25 DEG. C, AFTER 24
HOURS (SPINDLE #4, 20 RPM), FANN VISCOSITY INITIAL 10 MINUTE: 42 CP
(MINIMUM), (2.00 GM / 350 MLS, IN SEA WATER, @ 511 SEC-1, F1 SPRING. SEA
WATER: 41.95 GM NACL IN 1000 MLS DISTILLED WATER.
1000824113
23
Chemicals
(Drilling Fluids)
POLYETHER POLYOL DEFOAMER
ADDITIVE DRILLING FLUID; LIQUID FORM,POLYETHER POLYOL,FOR DEFOAMER
USED IN BOTH FRESHWATER AND SALTWATER DRILLING FLUIDS SYSTEMS,5
GALLON PAIL,DEFOAMER USED IN BOTH FRESHWATER AND SALTWATER
DRILLING FLUIDS SYSTEMS,EFFECTIVE FOR REDUCING FOAM CAUSED BY WATER
SOLUBLE GLYCOL PRODUCTS, CONTAINS NO OIL FOR CAUSING SHEEN OR SLICK
ON WATER SURFACE, NORMAL TREATMENT ,0.05 GAL BBL,CLEAR LIQUID, MILD
ODOR DENSITY 1003 KG/M3 8.36 LB/GAL, POUR POINT 26 DEG C, FLASH POINT
ADDITIVE, DRILLING FLUID, LIQUID, POLYETHER POLYOL DEFOAMER USED IN
BOTH FRESHWATER AND SALTWATER DRILLING FLUIDS SYSTEMS, 5 GALLON PAIL,
DEFOAMER USED IN BOTH FRESHWATER AND SALTWATER DRILLING FLUIDS
SYSTEMS, EFFECTIVE FOR REDUCING FOAM CAUSED BY WATE.
1000815463
24
Chemicals
(Drilling Fluids)
CRUDE OIL EMULSION BRAKER
ADDITIVE DRILLING FLUID; LIQUID AQUEOUS SOLUTION FORM,MIXTURE OF
ORGANIC NOMINAL PIPE SIZE: 5-1/8 IN,FOR EMULSION BREAKER, BREAKS DOWN
CRUDE FOR THE SEPARATION OF BOTH OIL AND SOLIDS,ORGANIC,
BIODEGRADABLE, CITRUS ODOR,55-GALLON DRUM,MEDIUM BLUE AQUEOUS
SOLUTION, SG:1.2-1.4, PH:7-9, VISCOSITY:100 CST,FREEZE POINT: 26 DEG F,
SOLUBLE IN FRESH AND BRINE WATER, APPLIED BY BATCH OR DOWN HOLE
INJECTION METHODS.
1000813531

Material Number
9COM/9CAT
25
Chemicals
(Drilling Fluids)
CRUDE OIL VISCOSITY REDUCER
ADDITIVE DRILLING FLUID; LIQUID, AQUEOUS SOLUTION FORM,MIXTURE OF
ORGANIC COMPOUNDS AND ENZYMES,FOR VISCOSITY REDUCING AGENT,
RETURNS HEAVY HYDROCARBONS TO AN OIL PHASE,ORGANIC, BIODEGRADABLE,
CITRUS ODOR,55-GALLON DRUM,MEDIUM BLUE AQUEOUS SOLUTION, SG:1.2-
1.4, PH:7-9, VISCOSITY:200 CST,FREEZE POINT: 27 DEG F, SOLUBLE IN FRESH &
BRINE WATER AND OIL SOLUBLE, APPLIED BY BATCH OR DOWN HOLE INJECTION
METHODS, ++DESIGNED FOR THE TREATMENT OF DIFFICULT PARAFFIN AND
ASPHALTENE PROBLEMS BREAK DOWN THE LONG CHAIN AND CYCLIC PARAFFIN'S
(ALONG WITH OTHER LONG CHAIN HYDROCARBONS SUCH AS ASPHALTENES)
ALLOWING THEM TO RETURN TO THE OIL PHASE PERMANENTLY.
1000813532
26
Chemicals
(Drilling Fluids)
EC-101 cutting wash
ADDITIVE DRILLING FLUID; AQUEOUS SOLUTION FORM,MIXTURE OF ORGANIC
COMPOUNDS AND ENZYMES,FOR A NON-TOXIC ,NON- HAZARDOUS,NON-
FLAMMABLE NON-CORROSIVE,100% BIODEGRADABLE,WATER BASED PRODUCT
WHICH IS UTILIZED IN BUT NOT LIMITED TO THE FOLLOWING APPLICATION,DRILL
CUTTING DECONTAMINATION, TREATMENT AND DISPOSAL, HYDROCARBON
CONTAMINATED SOLIDS TREATMENT AND DE- OILING OPERATION ON ONSHORE
AND OFFSHORE OIL DRILLING RIGS,PRODUCTION PLLATFORMS AND VESSELS , OIL
SPILL CLEANUP OPERATION AND PROCESS PLANT CLEAN UP . THE PRODUCT
LEAVES NO PETROCHEMICAL DISTILLATES AFTER PROPER
TREATMENT,APPEARANCE: MEDIUM BLUE AQUEOUS SOLUTION, SPECIFIC
GRAVITY: 1.2 - 1.4 (WATER=1), PH: 7 - 9 POUR POINT : 26 DEG F FREEZE POINT: 26
░F SOLUBILITY : FRESH AND BRINE WATER,55-GAL DRUM.
1000820609
27
Chemicals
(Drilling Fluids)
ALL TEMP
ADDITIVE; DRILLING MUD TYPE,FOR USED AS HT THINNER IN WIDE RANGE OF
WATER-BASE.,SOLID - WHITE POWDER FORM,25.0 LB/BAG,USED AS HT THINNER
IN WIDE RANGE OF WATER-BASE. DOES NOT CONTAIN HEAVY METALS/CHROME
OR REQUIRE SODIUM HYDROXIDE FOR ACTIVATION AND STABLE UP TO
TEMPERATURE 400 F DEG(204 DEG). TREATMENT RANGE FROM 0.5 LB/BBL TO
3.0 LB/BBL, ODOURLESS, PH : 7-9 (1%AQ. SOLN.), SOLUBLE IN WATER, SHEAR
STRENGTH, LB/100 FT▓, 32 MAX PLASTIC VISCOSITY, CP, 32 MAX, YIELD POINT,
LB/100 FT▓, 32 MAX, 10 SECOND GEL, LB/100 FT▓, 12 MAX, 10 MINUTE GEL,
LB/100 FT▓, 38 MAX, 30 MINUTE FILTRATE, ML, 48 MAX.
1000823315

Material Number
9COM/9CAT
28
Chemicals
(Drilling Fluids)
CHEMTROL X
ADDITIVE; ADDITIVE: DRILLING MUD TYPE,FOR PROVIDES HPHT FILTRATION
CONTROL AND RHEOLOGICAL STABILITY IN WIDE RANGE OF WATER-BASE
MUD.,SOLID - TAN TO BLACK POWDER FORM,50.0 LB/BAG,BLEND OF
DERIVATIZED ACRYLIC COPOLYMER DEFLOCCULANT AND CAUSTICIZED LIGNITE
PROVIDES HPHT FILTRATION CONTROL AND RHEOLOGICAL STABILITY IN WIDE
RANGE OF WATER-BASE MUD. INITIAL TREATMENTS OF 2.0 TO 6.0 LB/BBL.
NORMAL TREATMENT LEVELS ARE BASED ON TYPES OF WBM & NEEDED.
APPEARANCE : SOLID, TAN TO BLACK POWDER, ODOR: EARTHY, SPECIFIC
GRAVITY: 1.5 , PARTIALLY SOLUBLE IN WATER. SPECIFIC GRAVITY: 1.5 PH: 9-10
SOLUBILITY : PARTIALLY SOLUBLE IN WATER.
1000823317
29
Chemicals
(Drilling Fluids)
KEM-SEAL PLUS
ADDITIVE; ADDITIVE: DRILLING MUD TYPE,FOR HTHP FILTRATION CONTROL
ADDITIVE WORK WITH ALL TYPES OF WATER BASED FLUIDS,SOLID - WHITE
POWDER FORM,25.0 LB/BAG,HTHP FILTRATION CONTROL ADDITIVE WORK WITH
ALL TYPES OF WATER BASED FLUIDS, TEMPERATURES UP TO 500 DEG. F.
TREATMENT RANGE VARIES BASED ON FILTRATE VALUE DESIRED AND WELL
TEMPERATURE, A REASONABLE RANGE WILL BE 1 TO 6 LB/BBL.IS, SHOULD BE
ADDED SLOWLY TO AVOID HIGH RAISE IN VISCOSITY. APPEARANCE : SOLID,
WHITE POWDER, ODOR:SLIGHT, SPECIFIC GRAVITY :1300 KG/M3 @ 16 DEG. C,
SOLUBILITY : SOLUBLE IN WATER, SALT/HARD WATER PERFORMANCE, FILTRATE,
ML: 17 MAX AGING PERFORMANCE, FILTRATE, ML: 19 MAX.
1000823318
30
Chemicals
(Drilling Fluids)
Temperature Stabilizer
ADDITIVE; DRILLING MUD TYPE,FOR FREE RADICAL SCAVENGER AND
TEMPERATURE STABILIZER,COLORLESS LIQUID FORM,200
LITERS/DRUM,FUNCTIONS BY SCAVENGING FREE RADICALS AND SLOWS DOWN
THERMAL DEGRADATION OF POLYMERIC COMPONENTS, SUCH AS XANTHAN
GUM, PAC AND STARCH, IN THE DRILLING FLUID WHICH ALLOWING THE
TEMPERATURE STABILITY TO BE EXTENDED BY UP TO 50 DEG F. NORMAL
TREATMENT: 2.0 TO 4.0 LB/BBL FLASH POINT : > 195 DEG. F, SPECIFIC GRAVITY :
1.05-1.15, SOLUBILITY : SOLUBLE IN WATER, ACTIVES % W/W 68 - 72, SG @ 20° C
1.05 - 1.15.
1000823316

Material Number
9COM/9CAT
31
Chemicals
(Drilling Fluids)
COASTAL SPOT
ADDITIVE DRILLING FLUID; LIQUID FORM,BLEND OF POLYALPHAOLEFIN ( PAO)
SYNTHETIC HYDROCARBON, EMULSIFIERS, ACTIVATORS AND INITIATORS,FOR
SPOTTING FLUID FOR FREEING STUCK PIPE,PAO BASED PRODUCT WITH
PATENTED ADDITIVES,275 GALLON IBC CONTAINER,ADDITIVE, DRILLING FLUID:
LIQUID, BLEND OF POLYALPHAOLEFIN (PAO) SYNTHETIC HYDROCARBON,
EMULSIFIERS, ACTIVATORS AND INITIATORS, SPOTTING FLUID FOR FREEING
STUCK PIPE, PAO BASED PRODUCT WITH PATENTED ADDITIVES, 275 GALLON IBC
CONTAINER,CLEAR YELLOW LIQUID: SG:0.95-1. 05: DISPERSIBLE IN WATER: POUR
POINT: -20 DEG F, FLASH POINT GREATER 300 DEG F: REPLACEMENT FOR DIESEL
AND MINERAL OIL BASED SPOTTING FLUIDS: DEHYDRATES AND CRACKS FILTER
CAKE TO ALLOW PENETRATION AROUND THE PIPE WITH PAO TO FREE STUCK
PIPE.
1000813125
32
Chemicals
(Drilling Fluids)
SX PLUS, 160 MICRONS
ADDITIVE DRILLING FLUID; BLACK SOLID POWDER PARTICULATES OF SPECIFIC
SIZED GRINDS FORM,HEAT TREATED CARBON BASED MATERIAL,FOR USED FOR
SEEPAGE CONTROL, BRIDGING, PLUGGING, OIL & WATER MUDS, LUBRICITY,
SEALING OF DEPLETED ZONES, PREVENTION OF STUCK PIPES,GRAPHITE
PARTICLES 40 MESH TO GRATER THAN 200 MESH ( 425 TO > 75
MICRONS),ADDITIVE, DRILLING FLUID: BLACK SOLID POWDER PARTICULATES OF
SPECIFIC SIZED GRINDS, HEAT TREATED CARBON BASED MATERIAL, USED FOR
SEEPAGE CONTROL, BRIDGING, PLUGGING, OIL & WATER MUDS, LUBRICITY,
SEALING OF DEPLETED ZONES PREVENTION OF STUCK PIPES, GRAPH GREY TO
BLACK POWDER SG 1.5 FLASH POINT > 350 DEG (F): MELTING POINT > 500 DEG
(F): PARTICLE SIZE:D90-245, D50-160, D10-111 NEGLIGIBLE SOLUBILITY IN WATER
AND OIL: USED FOR SEALING POROUS SANDS AND OTHER FORMATION TO
REDUCE DIFFERENTIAL PRESSURE TRANSFER.
1000813126
33
Chemicals
(Drilling Fluids)
Cross-LINK LCM Retarder
ADMIXTURE DRILLING MUD; CLEAR LIQUID FORM,ADDITIVE RETARDER,FOR
CROSS-LINKING X-LINK POLYMER FOR MIXING VISCOUS PILLS FOR CURING FLUID
CIRCULATION LOSS DURING DRILLING OPERATION,CROSS LINKING MATERIAL FOR
X-LINK POLYMER,5 GALLONS PER CAN,SPECIFIC GRAVITY 1.323 @20 DEG C,
BOILING POINT 221 DEG F (105 DEG C), MOLECULAR WEIGHT 112.0, SOLUBLE IN
WATER SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT
PACKING MANUAL.
1000757568

Material Number
9COM/9CAT
34
Chemicals
(Drilling Fluids)
Cross-LINK LCM
ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,LOST CIRCULATION
MATERIAL,ECTED BY TEMPERATURE AND EXTENDERS. ND OF HIGH MOLECULAR
RETARDERS LULOSE FIBERS AND PARTICLE SS-LINKING AGENTS, G. THE CROSS-
LINKING IS PERATURE TOLERANT GEL-LIKE FORM STIFF, DURABLE AND PAPER
BAG,INSOLUBLE IN WATER. SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI
ARAMCO EXPORT PACKING MANUAL. THE ORIGINAL MANUFACTURER, PRODUCT
NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL, EXPIRATION DATE
IF REQUIRED, STOCK NUMBER AND COUNTRY OF ORIGIN SHALL BE PRINTED ON
THE CONTAINER. THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG
(CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER
(INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT PAPER 3RD PLY 80 LB MIN.
NATURAL KRAFT PAPER (EXTERIOR PLY).
1000757567
35
Chemicals
(Drilling Fluids)
BIG BAG BARITE TRANS 0.99 M3
ORANGE
BIG BAG SYSTEM COMPONENTS: CONTAINER: BIG BAG; 35 CU FT CAPACITY;
ORANGE COLOR; (FOR BARYTES). CONTAINER; BARYTE TRANSPORT TYPE,0.99 M3
(35 CU FT),BODY AND CONE SECTION: M049 LID SECTION: M426 INLET AND
OUTLET SPOUT: M326 HEAVY DUTY WIRE RING: INSERTED IN THE TOP WELDED
LID MADE FROM WIO2 MATERIAL,ORANGE,BIG BAG SYSTEM COMPONENT, IBC
TRANSPORT CONTAINERS LTD THERE ARE TWO (2) CERTIFICATE NUMBERS FOR
THE BAGS, AND THE FOLLOWING MANDATORY TEST REQUIREMENTS MUST BE
MET: A) STANDARD: BS-EN 1898-2001, CLASS: HEAVY DUTY THERMOPLASTIC,
CERTIFICATE NUMBER: 101043, APPROVED RATING: SWL: 2500KG/8:1 SF. B)
STANDARD: EFIBCA 003: 1985, CLASS: HEAVY DUTY THERMOPLASTIC,
CERTIFICATE NUMBER: 101161E APPROVED RATING: SWL: 2500KG/8:1 SF
1000029881
36
Chemicals
(Drilling Fluids)
BIG BAG BENTONITE TRANS 0.99
M3 BLUE
BIG BAG SYSTEM COMPONENTS: CONTAINER: BIG BAG; 35 CU FT CAPACITY; BLUE
COLOR; (FOR BENTONITE). CONTAINER; BENTONITE TRANSPORT TYPE,0.99 M3
(35 CU FT),BODY AND CONE SECTION: M047 LID SECTION: M425 INLET AND
OUTLET SPOUT: M325 HEAVY DUTY WIRE RING: INSERTED IN THE TOP WELDED
LID MADE FROM WIO2 MATERIAL,BLUE,BIG BAG SYSTEM COMPONENT, IBC
TRANSPORT CONTAINERS LTD THERE ARE TWO (2) CERTIFICATE NUMBERS FOR
THE BAGS, AND THE FOLLOWING MANDATORY TEST REQUIREMENTS MUST BE
MET: A) STANDARD: BS-EN 1898-2001, CLASS: HEAVY DUTY THERMOPLASTIC,
CERTIFICATE NUMBER: 101043, APPROVED RATING: SWL: 2500KG/8:1 SF. B)
STANDARD: EFIBCA 003: 1985, CLASS: HEAVY DUTY THERMOPLASTIC,
CERTIFICATE NUMBER: 101161E APPROVED RATING: SWL: 2500KG/8:1 SF
1000029882

Material Number
9COM/9CAT
37
Chemicals
(Drilling Fluids)
BIG BAG, ZIP NYLON
BIG BAG SYSTEM COMPONENTS: ZIP TIES: NYLON; BIG BAG; TYPE 120-R. . TIE; ZIP
TYPE,NYLON,BIG BAG SYSTEM COMPONENT, IBC TRANSPORT CONTAINERS LTD
TYPE "120-R".
1000029930
38
Chemicals
(Drilling Fluids)
BIG BAG, LIFTING
BIG BAG SYSTEM COMPONENTS: LIFTING RING: BIG BAG; TYPE 109.5. . RING; BIG
BAG LIFTING TYPE,BIG BAG SYSTEM COMPONENTS, IBC TRANSPORT CONTAINERS
LTD, TYPE 109.5.
1000029887
39
Chemicals
(Drilling Fluids)
PENETREX - ROP enhancer
ADMIXTURE DRILLING MUD; LIQUID FORM,ISOMERISED OLEFINS 60-90%,FOR
DESIGNED TO INCREASE RATE OF PENETRATION (ROP)IN WATER BASED DRILLING
FLUID SYSTEMS, USED IN MEDIUM TO HARD SHALES,ISOMERISED OLEFINS 60-
90%,55 GAL/DRUM,RECOMMENDED INITIAL TREATMENT OF 1% TO 2% BY
VOLUME SHOULD BE MADE BY INJECTION TO THE CIRCULATING SYSTEM.
ADDITIONAL CAN BE ADDED UP TO 5-6% BY VOLUME DEPENDING ON THE ROP
ACHIEVED, AMOUNT OF SHALE ENCOUNTERED, TYPE OF MUD SYSTEM AND THE
INTERVAL LENGTH COLORLESS TO LIGHT YELLOW, MILD ODOR,SG 0.84, FREEZING
POINT-10 DEG C, BOILING POINT >270OC, FLASH POINT > 136 DEG C,INSOLUBLE
IN WATER SOLUBLE IN HYDROCARBONS SHIPMENT OF PRODUCTS MUST
CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL.
1000775552
40
Chemicals
(Drilling Fluids)
MAX-PLEX
ADMIXTURE DRILLING MUD; BROWN POWDER DUST FORM,RESIN AND
ALUMINATE COMPOUND,FOR FOR REDUCING PORE PRESSURE TRANSMISSION
AND HPHT FILTRATION RATES,ALUMIUM COMPLEX-40-60%&OXYALKYLATED
ALKANOL -1-5% BY WT,50 LB BAG,USED IN FRESH UP TO SATURATED SALT WATER
BASE MUD SYSTEMS FOR STABILIZING SHALE AND PREVENTION OF BIT AND
BOTTOM HOLE ASSEMBLY BALLING BROWN COLOR, ODORLESS, SG 1.85,PH 11-12
(1% SOLUTION) TEMP. STABILITY300 DEG F, SOLUBLE IN WATER, INSOLUBLE IN
ORGANIC SOLVENTS SHIPMENT OF PRODUCTS MUST CONFORM TO SAUDI
ARAMCO EXPORT PACKING MANUAL.
1000775553
41
Chemicals
(Drilling Fluids)
MAX-GUARD
ADMIXTURE DRILLING MUD; LIQUID FORM,POLYAMINE,FOR PRIMARY CLASS
HYDRATION AND SWELLING SUPPRESSANT,AQUEOUS SOLUTUTION OF AMINE
ACID COMPLEX,55 GAL DRUM,THAT PROVIDES INHIBITION OF REACTIVE CLAY
AND GUMBO BY SUPPRESSING HYDRATION AND SWELLING WITHIN THE CLAY
MINERAL PLATELETS AMBER COLOR, MILD ODOR,SG 1.07-1.09, PH 6.8-7.2 (2%
SOLUTION),SOLUBLE IN WATER,FLASH POINT >93OC SHIPMENT OF PRODUCTS
MUST CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL.
1000775554

Material Number
9COM/9CAT
42
Chemicals
(Drilling Fluids)
CLAY-SEAL
ADMIXTURE CEMENT; FOR CLAYSEAL SHOULD BE ADDED DIRECTLY TO THE
SYSTEM.THIS SHOULD OCCUR AFTER PREHYDRATING.,TYPE ADMIXTURE, CEMENT
HYDRO GUARD, CLAYSEAL,ETHOXYLATED POLYAMINE,5 GAL GALLON
PAIL,APPEARANCE: TRANSPARENT YELLOW LIQUID, ODOR: AMINE, SPECIFIC
GRAVITY: 1GM/CC, SOLUBILITY: SOLUBLE IN WATER. CLAYSEAL SHOULD BE
ADDED DIRECTLY TO THE SYSTEM.THIS SHOULD OCCUR AFTER PREHYDRATING
ALL BENTONITE ADDITIONS AND ADDING FLUID LOSS ADDITIVES.INITIAL
TREATMENTS IN NONDISPERSED SYSTEMS MAY CAUSE SLIGHT FLOCCULATION
AND MAY REQUIRE A THINNER. CLAYSEAL ADDITIONS WILL BE 4-8 LB/BBL AND
FOR BEST RESULTS A MINIMUM OF 4 LB/BBL OF CLAYSEAL┐ IS REQUIRED.
1000812301
43
Chemicals
(Drilling Fluids)
GLYCOL - GEM GP
ADMIXTURE DRILLING MUD; DARK BROWN LIQUID FORM,POLYALKYLENE GLYCOL
OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR
ADVERSELY AFFECT FLUID PROPERTIES.,FOR USED TO IMPROVE LUBRICITY, SHALE
STABILITY AND REDUCE BIT BALLING. NORMAL TREATMENT,POLYALKYLENENE
GLYCOL,55 GALLON DRUM,CONCENTRATION IS 2-6% BY VOLUME IN A MUD
SYSTEM BUT OPTIMUM CONCENTRATION SHOULD BE IDENTIFIED ON A CASE BY
CASE BASIS. APPEARANCE YELLOW TO BROWN LIQUID, ODOR MILD, SPECIFIC
GRAVITY 1.01, BOILING POINT (░C) 126 C, SOLUBILITY IN WATER MISCIBLE.
SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING
MANUAL.
1000812016
44
Chemicals
(Drilling Fluids)
BORE-HIB
ADDITIVE DRILLING FLUID; DARK YELLOW LIQUID FORM,GLYCERINE AND SILICATE
SALT OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL
AND/OR ADVERSELY AFFECT FLUID PROPERTIES.,FOR USED AS STABILIZER WHILE
DRILLING HIGHLY REACTIVE SHALE AND CLAYS. BORE-HIB CAN BE DEPLETED
WHEN DRILLING ANHYDRITE, GREEN. CEMEN,GLYCERINE AND SILICATE SALT
MIXTURE,55 GALLON DRUM,ADDITIVE, DRILLING FLUID: DARK YELLOW LIQUID,
GLYCERINE AND SILICATE SALT OTHER ASSOCIATED ELEMENTS MUST NOT BE
HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES USED
AS STABILIZER WHILE DRILLING HIGHLY REACTIVE SHALE AND CLAYS. BORE-HIB
CAN. APPEARANCE DARK YELLOW SHIPMENT OF PRODUCT SHALL CONFORM TO
SAUDI ARAMCO EXPORT PACKING MANUAL.
1000812015

Material Number
9COM/9CAT
45
Chemicals
(Drilling Fluids)
LC-LUBE, 300-450 MICRON
ADMIXTURE DRILLING MUD; SOLID BLACK OF SPECIFIC SIZED GRINDS
PARTICULATES FORM,PHITE H RESILIENCY SYNTHETIC,FOR WELLBORE
STRENGTHENING. DEPLETED D IN OIL OR WATER BASE MUD ES, PREVENTION OF
STUCKPIPE,50 LB (22.7 KG)/ SACK,1ST PLY OTHER ASSOCIATED ELEMENTS MUST
NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID
PROPERTIES. APPEARANCE: GRAY TO BLACK POWDER. ODOR: ODORLESS. SG: 1.75-
2.5 GM/CC. SOLUBILITY: INSOLUBLE IN WATER & ACID. PARTICLE SIZE: D50: 300-
450 MICRON. RESILIENCY: GREATER THAN 80% AT 10,000 PSI. CONTAINER IS A
MULTI-WALLED SACK - 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND
PLY - 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT
PAPER (EXTERIOR PLY).
1000758660
46
Chemicals
(Drilling Fluids)
LC-LUBE Fine, 165 MICRON
ADMIXTURE DRILLING MUD; SOLID BLACK OF SPECIFIC SIZED GRINDS TICULATES
FORM,LC-LUBE FINE, GRAPHITE, SYNTHETIC,FOR USE FOR SEEPAGE CONTROL
BRIDGING, PLUGGING, OIL MUDS, WATER MUDS, LUBRICITY, SEALING OF
DEPLETED ZONES, PREVENTION OF STUCK PIPE,LC-LUBE FINE SYNTHETIC
GRAPHITE,50 LB (22.7 KG)/ SACK,1ST PLY OTHER ASSOCIATED ELEMENTS MUST
NOT BE HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID
PROPERTIES. APPEARANCE: GRAY TO BLACK POWDER ODOR: ODORLESS SP. GR.:
2.25 GM/CC FREEZING POINT: NA MELTING POINT: >5000 F DEG SOLUBILITY:
INSOLUBLE IN WATER & ACID PARTICLE SIZE: D90 300 D50 165 D10 75
CONTAINER IS A MULTI-WALLED SACK - 75 LB MIN. NATURAL KRAFT PAPER
(INTERIOR PLY). 2ND PLY - 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB
MIN. NATURAL KRAFT PAPER (EXTERIOR PLY).
1000758661
47
Chemicals
(Drilling Fluids)
MAX-SHIELD
ADMIXTURE DRILLING MUD; MILKY, WHITE LIQUID FORM,MAX-SHIELD LATEX, 60
WT%,FOR SEALING POLYMER IN WATER-BASED DRILLING FLUID SYSTEM,LATEX,
60 WT%,55 GAL/DRUM,USED TO CREATE A SEMI-PERMEABLE MEMBRANE AT
BOREHOLE, IMPROVE HOLE STABILITY AND REDUCE PORE PRESSURE
TRANSMISSION WHICH HELPS PREVENT STUCK PIPE WHEN DRILLING DEPLETED
ZONES. OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL
AND/OR ADVERSELY AFFECT FLUID PROPERTIES. NORMAL TREATMENT: 2-5 % BY
VOLUME. APPEARANCE: MILKY, WHITE LIQUID. ODOR: MILD PH: 6-9 SP. GR.: 1.05
GM/CC FREEZING POINT: 32 F DEG (0 C DEG) BOILING POINT: 212 F DEG (100 C
DEG) FLASH POINT: NA RELATIVE DENSITY: 1025 KG/M3 @ 16 C DEG. SOLUBILITY:
MISCIBLE WITH WATER VOC WEIGHT: <0.6%.
1000758663

Material Number
9COM/9CAT
48
Chemicals
(Drilling Fluids)
STEEL SEAL
ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,GRAPHITE,FOR LOSS
CIRCULATION ADDITIVE TO STOP LOSSES IN POROUS AND FRACTURED
FORMATIONS,BLACK ANGULAR MATERIAL CARBON BASED MATERIAL,50 LB
BAG,FOR USE WITH SYNTHETIC AND WATER-BASED DRILLING FLUIDS IMPARTS
LUBRICITY FOR WATER BASED FLUIDS TO CONTROL SEEPAGE AND LOST
CIRCULATION 15-25 LB/BBL USED AS A BACKGROUND CONCENTRATION, 50-100
LB/BBL LCM PILL FOR SPOTTING OVER THIEF ZONES, 3-10 LB/BBL FOR LUBRICITY
IN WATER BASED FLUIDS. ODORLESS, SG 1.75, FLASH POINT >356OC,INSOLUBLE
IN WATER, PARTICLES SIZE PERCENT < 40 MESH: 100 PERCENT > 200 MESH: 95
CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME,
THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE
AS FOLLOWS: 1ST PLY - 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND
PLY - 75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN.
1000775555
49
Chemicals
(Drilling Fluids)
STEEL SEAL Fine
ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,GRAPHITE,FOR LOSS
CIRCULATION ADDITIVE TO STOP LOSSES IN POROUS AND MICRO-FRACTURED
FORMATIONS,GRAY-BLACK ANGULAR MATERIAL CARBON BASED MATERIAL,50 LB
SACK,FOR USE WITH SYNTHETIC AND WATER-BASED DRILLING FLUIDS IMPARTS
LUBRICITY FOR WATER BASED FLUIDS TO CONTROL SEEPAGE AND LOST
CIRCULATION 15-25 LB/BBL USED AS A BACKGROUND CONCENTRATION, 60-110
LB/BBL LCM PILL FOR SPOTTING OVER THIEF ZONES, 4-10 LB/BBL FOR LUBRICITY
IN WATER BASED FLUIDS. ODORLESS, SG 1.75,FLASH POINT >356OC,INSOLUBLE
IN WATER, PARTICLES SIZE DRY SIEVE ANALYSIS:FINE 99% MIN & REGULAR 95%
MIN. THROUGH (30 MESH) DRY SIEVE ANALYSIS:FINE 40% MIN & REGULAR 2%
MAX THROUGH (200 MESH) MEDIAN PARTICLE SIZE: 80 CONTAINER MUST BE
PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME,
LOCATION, PRODUCTION DATE AND BATCH NUMBER. THE CONSTRUCTION OF
THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY -
75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND PLY - 75 LB MIN.
NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR
PLY) SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT SAMPLING AND TESTING AS
NEEDED.
1000775556

Material Number
9COM/9CAT
50
Chemicals
(Drilling Fluids)
STEEL SEAL 50
ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,SYNTHETIC GRAPHITE,FOR
LOSS CIRCULATION ADDITIVE TO STOP LOSSES IN POROUS AND MICRO-
FRACTURED FORMATIONS,SYNTHETIC GRAPHITE,50 LB. BAG,FOR USE WITH
SYNTHETIC AND WATER-BASED DRILLING FLUIDS IMPARTS LUBRICITY FOR WATER
BASED FLUIDS GREY-BLACK ANGULAR MATERIAL,ODORLESS, SG 1.75, INSOLUBLE
IN WATER, MEDIAN PARTICLE SIZE D-50: 50 15-25 LB/BBL AS A BACKGROUND
CONCENTRATION FOR SEEPAGE AND LOST CIRCULATION CONTROL. 60-110
LB/BBL LCM PILL FOR SPOTTING OVER THIEF ZONESOR ON BOTTOM PRIOR TO
TRIPS AND 4-10 LB/BBL FOR LUBRICITY IN WATER-BASED FLUIDS. CONTAINER
MUST BE PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME,
LOCATION, PRODUCTION DATE AND BATCH NUMBER. THE CONSTRUCTION OF
THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY -
75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY). 2ND PLY - 75 LB MIN.
NATURAL KRAFT PAPER. 3RD PLY - 80 LB MIN. NATURAL KRAFT PAPER (EXTERIOR
PLY)
1000775557
51
Chemicals
(Drilling Fluids)
CLAY-GRABBER
ADMIXTURE DRILLING MUD; LIQUID FORM,NON-IONIC LIQUID POLYMER,FOR
FLOCCULANT AND CLAY ENCAPSULATOR. IT STOPS SHALE DISPERSION AND HELPS
STABILIZE SHALES IN THE WELLBORE,HIGH MOLECULAR WEIGHT, NON-IONIC
LIQUID POLYMER,5 GAL PAIL,OPAQUE LIQUID, OFF-WHITE COLOR, PH:6.5-7.5,
CONCENTRATION 30-40 (1% ACTIVE POLYMER), SG 1.02 -1.06, STABILITY UP TO
300 DEG F, IMIISCIBLE IN WATER FOR RESULTS CLAY GRABBER FLOCULANT
SHOULD BE MIXED THROUGH A HIGH SHEAR HOPPER. 0.5-1.0 LB/BBL IN THE
HYDRO-GUARD SYSTEM. 0.25-0.5 LB/BBL FOR CLEAR WATER DRILLING. 0.5-1.0
FOR TROUBLESOME SHALES IN A WATER- BASED SYSTEM.
1000775561
52
Chemicals
(Drilling Fluids)
CLAY-SYNC
ADMIXTURE DRILLING MUD; GRANULES FORM,NON-IONIC 100% ACTIVE DRY
POLYMER,FOR A CLAY INHIBITOR FOR WATER BASED DRILLING FLUIDS. SHALE
STABILIZER AND WELLBORE LUBRICATOR,LOW MOLECULAR WEIGHT, NON-IONIC
DRY POLYMER,50 LB. BAG,POLYMER ADHERES TO SURFACE OF REACTIVE CLAYS
PREVENTING DISPERSION AND HYDRATION, SHOULD BE MIXED THROUGH THE
HOPPER IN THE HYDRO-GUARD SYSTEM. IF SALINITY >140,000 PPM USE 2 LB/BBL,
IF SALINITY IS<140,000 PPM, USE 3 LB/BBL OFF-WHITE GRANULES, SOLID,
ODORLESS , PH (1% SOLUTION): 6.5-7.5 , SG 1.04, 100 (%ACTIVE POLYMER), BULK
DENSITY 50 LB/FT3 @ 20OC, SOLUBLE IN WATER SHIPMENT OF PRODUCT SHALL
CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL.
1000775562

Material Number
9COM/9CAT
53
Chemicals
(Drilling Fluids)
MICROWASH - OHR-759
ADMIXTURE DRILLING MUD; LIQUID FORM,N-BUTANOL,FOR USED AS A CO-
SURFACTANT TO REMEDIATE WELLBORE DAMAGE,SURFACTANT BLEND WITH N-
BUTANOL 100%,55 GALLON DRUM,APPEARANCE CLEAR, COLORLESS
LIQUID,ODOR SWEET, RELATIVE DENSITY:810 KG/M3 BOILING POINT:118 DEG
C,FLASH POINT:37 DEG C, SOLUBLE IN WATER,AUTO-IGNITION TEMPERATURE
343░C. ++THIS ITEM IS ONE OF COMPONENT USED TO FORMULATE THE MICRO-
WASH SYSTEM FOR WELLBORE REMEDIATION AND REMOVE DAMAGE TO THE
RESERVOIR DRILLED WITH INVERT EMULSION FLUIDS. ++ CONTAINER MUST BE
PROPERLY LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME,
LOCATION, PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO'S
PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED.
MICRO-WASH ACID SYSTEM CONSISTS BAKER ++ HUGHES PRODUCTS, PRIME-743,
PRIME-760, PRIME-770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC
ACID AND FORMIC ACID.
1000811421
54
Chemicals
(Drilling Fluids)
MICROWASH - OHR-AC
ADMIXTURE DRILLING MUD; LIQUID FORM,ACID CORROSION INHIBITOR,FOR
USED AS AN ACID CONTROL ADDITIVE IN THE MICRO-WASH ACID
SYSTEM,,CONTAINING PROPARGYL ALCOHOL 5-10%,METHANOL 30-60% AND
BLEND OF NON-IONIC SURFACTANTS,55 GALLON DRUM,APPEARANCE:CLEAR
AMBER LIQUID,ODOR:SWEET,SPECIFIC GRAVITY:885-897 KG/M3,FLASH POINT:10-
15.6 DEG C, POUR POINT:LESS THAN -20.2 DEG C,SOLUBLE IN WATER, PH:4-6(5%
IN 25% IPA/75% WATER),FLASH POINT:10-15.6 DEG C (TAG CLOSED CUP),VAPOUR
PRESSURE:85MM HG AT 21 DEG C, ++ THIS ITEM PROVIDES CORROSION
RESISTANCE WHILE REMEDIATING WELLBORE DAMAGE AND DESTROYING OIL-
MUD FILTER CAKE, THE PRODUCT IS BIODEGRADABLE, ACID DISPERSIBILE AND IS
TOLERANT FOR SALTS PRESENT IN ACIDS.CONTAINER MUST BE PROPERLY
LABELED WITH, VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION,
PRODUCTION DATE AND BATCH NUMBER. SAUDI ARAMCO'S PERSONNEL WILL
CARRY OUT PROPER SAMPLING AND TESTING AS NEEDED. ++ MICRO-WASH ACID
SYSTEM CONSISTS BAKER HUGHES PRODUCTS, PRIME-743, PRIME-760, PRIME-
770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC ACID AND FORMIC
ACID.
1000811422

Material Number
9COM/9CAT
55
Chemicals
(Drilling Fluids)
MICROWASH - OHR-757
ADMIXTURE DRILLING MUD; LIQUID FORM,BLEND OF NON-IONIC AND ANIONIC
SURFACTANTS.FOR TO DESTROY INVERT EMULSION IN OIL-BASED MUD FILTER
CAKE AND SOILDS,SODIUM TRIDECYL ETHER SULFATE 10-20% & OTHER
COMPONENTS,275 GALLON IBC CONTAINER,ADMIXTURE, DRILLING MUD: LIQUID,
BLEND OF NON-IONIC AND ANIONIC SURFACTANTS., TO DESTROY INVERT
EMULSION IN OIL-BASED MUD FILTER CAKE AND SOILDS, SODIUM TRIDECYL
ETHER SULFATE 10- 20% & OTHER COMPONENTS, 275 GALLON IBC CONTAINER,
APPEARANCE:TRANSPARENT, YELLOW LIQUID, ODOR:DISINFECTANT,SPECIFIC
GRAVITY: 1086.5 KG/M3,. FLASH POINT >100░C SOLUBLE IN WATER, PH: 7.8 AT
25 DEG C, VISCOSITY: 28. 0CST AT 40░C.THIS MATERIAL IS USED AS ONE OF
SURFACTANT COMPONENT IN THE MICRO-WASH ACID SYSTEM IT IS BLENDED OF
NON-IONIC AND ANIONIC SURFACTANTS WITH NEAR ZERO INTERFACIAL.
CONTAINER MUST BE PROPERLY LABELED WITH:VENDOR'S NAME
SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING AND TESTING
AS NEEDED. MICRO-WASH ACID SYSTEM CONSISTS BAKER HUGHES PRODUCTS:
PRIME-743, PRIME-760, PRIME-770 ,OHR- 759, OHR-AC, OHR-757, OHR- 750 &
GLACIAL ACETIC ACID AND FORMIC ACID.
1000811423

Material Number
9COM/9CAT
56
Chemicals
(Drilling Fluids)
MICROWASH - OHR-750
SURFACTANTS,FOR TO REMEDIATE WELLBORE DAMAGE, DESTROY INVERT
EMULSION IN OIL-BASED MUD FILTER CAKE AND WATER-WET METAL
SURFACES,ALKYPHENYL OXIDE SULPHONATES,275 GALLON IBC
CONTAINER,ADMIXTURE, DRILLING MUD: LIQUID, BLEND OF NON-IONIC AND
ANIONIC URFACTANTS, TO REMEDIATE WELLBORE DAMAGE, DESTROY INVERT
EMULSION IN OIL-BASED MUD FILTER CAKE AND WATER-WET METAL SURFACES,
ALKYPHENYL OXIDE SULPHONATES , 275 GALLON IBC CONTAINER ,
APPEARANCE:CLEAR ,YLLOW- ORANGE LIQUID, ODOR:DISINFECTANT SPECIFIC
GRAVITY:1108 KG/M3,. BOILING POINT:212?F , FLASH POINT >100░C, SOLUBLE IN
WATER : PH:5.5 AT 25?C, VISCOSITY:69CST AT 40░C PROPRIETARY BLEND THAT IS
CUSTOM DESIGNED TO DISPERSE FILTER CAKE AS A COMPONENT IN MICRO-
WASH ACID SYSTEM TO REMOVE OBM SKIN DAMAGE AND ALLOW THE
RESERVOIR TO FLOW AT MAXIMUM POTENTIAL. IT IS BLEND OF NON-IONIC AND
ANIONIC SURFACTANTS WITH NEAR ZERO INTERFACIAL TENSION. NORMAL
TREATMENT: 10 - 25% BY VOLUME ++ CONTAINER MUST BE PROPERLY LABELED
WITH: VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION
DATE AND BATCH NUMBER.
1000811424
57
Chemicals
(Drilling Fluids)
MICROWASH - PRIME-743
ADMIXTURE DRILLING MUD; LIQUID FORM,GLYCEROL-BELEND OF NON-IONIC
SURFACTANTS,FOR USED FOR REMOVE OIL-WET SOLIDS FROM THE WELLBORE
AND WATER-WET METAL SURFACES.,GLYCEROL, BLEND OF NON-IONIC AND
ANIONIC SURFACTANTS,5 GALLON CAN,++ APPEARANCE OPAQUE YELLOW-
ORANGE LIQUID, PH 7.6, SPECIFIC GRAVITY 1015 KG/M3, BOILING POINT 100
DEG, FLASH POINT GREATER THAN 93 DEG C, WATER SOLUBLE ++ FULLY
COMPATIBLE AT ALLRATIOS WITH OIL MUD SPACERS AND OIL-NORMAL ONE OF
THE SURFACTANT COMPONENTS IN THE MICRO-WASH ACID SYSTEM ++
CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S NAME,
MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER
AS NEEDED. CONTAINER MUST BE PROPERLY LABELED ++MICRO-WASH ACID
SYSTEM CONSISTS BAKER HUGHES PRODUCTS, PRIME-743, PRIME-760, PRIME-
770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC ACID AND FORMIC
ACID.
1000811425

Material Number
9COM/9CAT
58
Chemicals
(Drilling Fluids)
ADMIXTURE DRILLING MUD; LIQUID FORM,2-BUTOXYETHANOL > 60% AND
SURFACTANTS,FOR USED TO CREATE AN EFFECTIVE PUSH PILL TO PILOT THE
DISPLACEMENT AND ACT AS NON EMULSIFIER,2-BUTOXYETHANOL > 60% AND A
BLEND OF UNSATURATED AROMATIC HYDROCARBONS, NON-IONIC SURFACTANT
AND ANIONIC SURFACTANTS,5 GALLON CAN,APPEARANCE CLEAR,`LIGHT YELLOW
LIQUID, ODOR MILD, SWEET SPECIFIC GRAVITY:920 KG/M3 FLASH POINT
64░C(PMCC),PH 4.7-5.7(75%IPA/25% WATER), SOLUBLE IN WATER, VISCOSITY: 95-
105 CPS AT 20 DEG C ++ USED FOR REMOVING OIL-WET DEBRIS FROM THE
METAL SURFACES, FULLY COMPATIBLE AT ALL RATIOS WITH OIL MUD SPACERS
AND ALL OIL- BASED DRILLING FLUIDS.ONE OF THE SURFACTANT COMPONENTS
IN THE MICRO-WASH ACID SYSTEM ++ CONTAINER MUST BE PROPERLY LABELED
WITH, VENDOR'S NAME, MANUFACTURE'S NAME LOCATION, PRODUCTION DATE
AND BATCH NUMBER SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER
SAMPLING AND TESTING AS NEEDED CONTAINER MUST BE PROPERLY LABELED ++
MICRO-WASH ACID SYSTEM CONSISTS BAKER HUGHES PRODUCTS, PRIME-743,
PRIME-760, PRIME-770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC
ACID AND FORMIC ACID.
1000811426
59
Chemicals
(Drilling Fluids)
SURFACTANTS,FOR TO CREATE AN EFFECTIVE FOLLOW-UP DISPLACEMENT
NEWTONIAN CLEANING PILL USED TO REMOVE OIL-WET SOLIDS,BLEND OF NON-
IONIC AND ANIONIC SURFACTANTS,5 GALLON CAN,APPEARANCE: TURBID,`
YELLOW-ORANGE LIQUID ODOR: MILD, SWEET SPECIFIC GRAVITY: 1098 KG/M3,
FLASH POINT: GREATER THAN 100 DEG C(TCC),WATER SOLUBLE ++ FULLY
COMPATIBLE AT ALL RATIOS WITH OIL MUD SPACERS AND ALL OIL- BASED
DRILLING FLUIDS. ONE OF THE SURFACTANT COMPONENTS IN THE MICRO-WASH
ACID SYSTEM ++ CONTAINER MUST BE PROPERLY LABELED WITH, VENDOR'S
NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND BATCH
NUMBER. ++ SAUDI ARAMCO'S PERSONNEL WILL CARRY OUT PROPER SAMPLING
AND TESTING AS NEEDED. CONTAINER MUST BE PROPERLY LABELED ++ MICRO-
WASH ACID SYSTEM CONSISTS BAKER HUGHES PRODUCTS, PRIME-743, PRIME-
760, PRIME-770,OHR-759, OHR-AC, OHR-757, OHR-750 & GLACIAL ACETIC ACID
AND FORMIC ACID.
1000811427

Material Number
9COM/9CAT
60
Chemicals
(Drilling Fluids)
ACETIC ACID > 96%
ADDITIVE DRILLING FLUID; CLEAR,COLORLESS LIQUID FORM,ACETIC ACID >
96%,FOR TO ACIDIZE SOLUBLE CALCIUM CARBONATE PARTICLES IN WELLBORE
REMEDIATION,ACETIC ACID > 96%,275 GALLON IBC TOTE,CLEAR LIQUID, STRONG
PUNGENT VINEGAR ODOR DENSITY 1050 KG/M3, BOILING POINT 117 DEG C,
FLASH POINT >102.2░C, SOLUBLE IN WATER,SOLUBLE AUTO-IGNITION
TEMPERATURE 799░C. ACETIC ACID IS A COMPONENT OF THE BAKER HUGES
MICRO- WASH SYTEM TO IMPROVE WELL PRODUCTIVITY. IT IS A CARBOXYLIC
ACIDS WITH THE MOLECULAR FORMULA OF CH3COOH, NORMAL TREATMENT 1 -
15 % BY VOLUME. 275 GALLON IBC.
1000814796
61
Chemicals
(Drilling Fluids)
FORMIC ACID >90%
ADDITIVE DRILLING FLUID; CLEAR,COLORLESS LIQUID FORM,FORMIC ACID
>90%,FOR TO ACIDIZE SOLUBLE CALCIUM CARBONATE IN MICRO-WASH,FORMIC
ACID >90%,55 GALLON DRUM,ADDITIVE DRILLING FLUID CLEAR,COLORLESS
LIQUID FORM,FORMIC ACID >90%,FOR TO ACIDIZE SOLUBLE CALCIUM
CARBONATE IN MICRO-WASH, FORMIC ACID >90%,55 GALLON DRUM,ADDITIVE,
DRILLING FLUID: CLEAR,COLORLESS LIQUID, FORMIC ACID >90%, TO ACIDIZE
SOLUBLE CALCIUM CARBONATE IN MICRO-WASH, FORMIC ACID >90%, 55
GALLON DRUM , ADDITIVE, DRILLING FLUID: CLEAR,COLORLESS LIQUID,FORMIC
ACID >90%, TO ACIDIZE SOLUBLE CALCIUM CARBONATE IN MICRO-WASH,
FORMIC ACID >90%, 55 GALLON DRUM.
1000811877
62
Chemicals
(Drilling Fluids)
N-FLOW - LOSURF-259
ADDITIVE DRILLING FLUID; LIQUID FORM,ISOPROPANOL AND HEAVY AROMATIC
PETROLEUM NAPTHA,FOR BREAKS EMULSION IN OIL BASE MUD FILTER CAKE,
USED IN PUSH PILL SPACER PRIOR TO SPOT N-FLOW 325 TREATMENT FILTER CAKE
REMOVAL,5 GALLON CAN,ADDITIVE, DRILLING FLUID: LIQUID, ISOPROPANOL AND
HEAVY AROMATIC PETROLEUM NAPTHA, BREAKS EMULSION IN OIL BASE MUD
FILTER CAKE, USED IN PUSH PILL SPACER PRIOR TO SPOT N-FLOW 325
TREATMENT FOR FILTER CAKE REMOVAL, ISOPROPANOL AND HEAVY AROMATIC
PETROLEUM NAPTHA, 5 GALLON CAN, APPEARANCE: CLEAR LIGHT AMBER,
ALCOHOL ODOR, SPECIFIC GRAVITY: 0.92 @ 20 DEG C BOILING POINT: 92 DEG C,
DISPERSES IN WATER. ++ PREVENTS OIL WET FINES FROM STABILIZING
EMULSIONS, NORMAL USE CONCENTRATION: 0.1 - 2.0 % V/V. NONIONIC
NONEMULSIFIER BLEND, PRIMARILY DESIGNED FOR ACIDIZING LIMESTONE,
DOLOMITE AND SANDSTONE FORMATION & FRACTURE TREATMENT.
1000811529

Material Number
9COM/9CAT
63
Chemicals
(Drilling Fluids)
Mutual Solvent - MUSOL
ADDITIVE DRILLING FLUID; LIQUID FORM,ETHYLENE GLYCOL MONOBUTYL ETHER
SOLVENT,FOR REDUCE OIL WET TENDENCIES AND IMPROVE THE OVERALL
WETTING CONDITION OF THE FORM,ETHYLENE GLYCOL MONOBUTYL ETHER,55
GALLON DRUM,ADDITIVE, DRILLING FLUID: LIQUID, ETHYLENE GLYCOL
MONOBUTYL ETHER SOLVENT, USED WITH NONANIONIC SURFACTANT (LOSURF-
259) TO REDUCE OIL WET TENDENCIES AND IMPROVE THE OVERALL WETTING
CONDITION OF THE FORM, ETHYLENE GLYCOL MONOBUTYL ETHER, 55 GALLON
DRUM , APPEARANCE: COLORLESS LIQUID, MILD ODOR, SPECIFIC GRAVITY: 0.9 @
20 DEG C BOILING POINT: 171 DEG C SOLUBLE IN WATER. ++ PREVENTS OIL WET
FINES FROM STABILIZING' EMULSIONS, NORMAL USE CONCENTRATION: 10 %
V/V. PRIMARILY USED DURING ACIDIZING OPERATIONS IN SILICATE FORMATION.
++ CONTAINER MUST BE PROPERLY LABELED WITH VENDOR'S NAME,
MANUFACTURE'S NAME LOCATION, PRODUCTION DATE AND BATCH NUMBER
AS NEEDED ++ N-FLOW 325 SYSTEM CONSISTS OF HALLIBURTON BAROID
PRODUCTS LOSURF-259, MUSOL, N-FLOW 325 & BDF-443.
1000811540
64
Chemicals
(Drilling Fluids)
N-FLOW 325
ADDITIVE DRILLING FLUID; LIQUID FORM,DIETHYLENE GLYCOL DIFORMATE,FOR
RELEASED FORMIC DISSOLVES CALCIUM CARBONATE TO REMOVE FILTER CAKE
AND REPAIR FILTER CAKE AND REPAIR MUD DAMAGE,DIETHYLENE GLYCOL
DIFORMATE,55 GALLON DRUM,ADDITIVE, DRILLING FLUID: LIQUID, DIETHYLENE
GLYCOL DIFORMATE , RELEASED FORMIC DISSOLVES CALCIUM CARBONATE TO
REMOVE FILTER CAKE AND REPAIR MUD DAMAGE, DIETHYLENE GLYCOL
DIFORMATE, 55 GALLON DRUM , APPEARANCE: LIGHT YELLOW LIQUID,ODOR:
CHARACTERISTIC, SPECIFIC GRAVITY 1.2 GM/CC, BOILING POINT:240 DEG C,
PH:2.8 SOLUBLE IN WATER ++ COMPATIBLE WITH OIL, FORMATION BRINE AND
DRILL- IN FLUID BASE OIL (DIESEL), THE CHEMICAL IS DISSOLVED IN THE CARRIER
BRINE, BECAUSE THE ACID LIBERATION ACTION IS SLOW. ACID WILL BE
GENERATED OVER THE SUBSEQUENT PERIOD OF TIME, NORMAL CO.
1000811647

Material Number
9COM/9CAT
65
Chemicals
(Drilling Fluids)
N-FLOW - BDF-443
ADDITIVE DRILLING FLUID; LIQUID FORM,SURFACTANT,FOR VALUE EMULSIFIER,
CHANGES THE WETTABILITY OF OIL MUD FILTER CAKE, FOR ACID
CLEANING,BLEND OF PROPRIERATORY CHEMICALS,55 GALLON DRUM,ADDITIVE,
DRILLING FLUID: LIQUID, SURFACTANT, EMULSIFIER, CHANGES THE WETTABILITY
OF OIL MUD FILTER CAKE, FOR ACID CLEANING, BLEND OF PROPRIERATORY
CHEMICALS, 55 GALLON DRUM , APPEARANCE: MILKY TO PALE YELLOW LIQUID,
ODOR: MILD SWEET, SPECIFIC GRAVITY 1.04 GM CC, BOILING POINT: 240 DEG C,
PH 5 - 7.5 (2.5 %), FLASH POINT: GREATER THAN 100 DEG C, SOLUBLE IN WATER
++ IS WATER WET SURFACTANT DISSOLVED IN THE CARRIER BRINE ALONG WITH
N-FLOW. IT CHANGES THE WETTABILITY OF OIL MUD FILTER CA.
1000812034
66
Chemicals
(Drilling Fluids)
LIQUID THINNER - 450 F
ADMIXTURE: DRILLING MUD; 25 KG DRUM. . . ADMIXTURE DRILLING MUD;
LIQUID FORM,MODIFIED ANIONIC SULPHONATED POLYACRYLATE,FOR
POLYMERIC DEFOCCULANT AND THINNER FOR USE IN LOW LOW SOLID NON
DISPERSED WATER BASE MUD TO IMPACT HIGH TEPERATURE STABILITY,5 GAL
PER CAN,UP TO 234 DEG C (450 DEG F), FOR DEEP WELL APPLICATIONS.
EFFECTIVE IN THE PRESENCE OF DIVALENT IONS AND SALTS.
1000021600
67
Chemicals
(Drilling Fluids)
HYDROXY ETHYL CELLULOSE
(HEC)
ADMIXTURE: DRILLING MUD; VISCOSIFIER; HYDROXY ETHYL CELLULOSE (HEC),
EXTREMELY HIGH-YIEDLING ADMIXTURE DRILLING MUD; DRY FREE FLOWING
WHITE POWDER FORM,HYDROXY ETHYL CELLULOSE (HEC),FOR MULTI-PURPOSE
VISCOSIFYING POLYMER RAPIDLY SOLUBLE IN FRESHWATER, SEA WATER SALT
SATURATED WATER AND COMPLEX BRINE SYSTEMS. IT IS STABLE AT 250 DEG
F.,HYDROXY ETHYL CELLULOSE (HEC),25 KG OR 50 LB BAG,WATER-SOLUBLE, NON-
IONIC, HIGH MOLECULAR WEIGHT POLYMER, SHIPMENT OF PRODUCT SHALL
CONFORM TO SAUDI NOTE: THE CONSTRUCTION OF THE MULTI-WALLED PAPER
BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY (INTERIOR PLY) 10# PE
COATING 0.000285 MICRON ALUMINUM SHEET 6# PE COATING 50 LB NATURAL
KRAFT PAPER. THE ALUMINUM SHEET IS COATED ON ONE SIDE WITH 10# PE THE
10# PE IS NEXT TO THE PRODUCT. THE COATED ALUMINUM SHEET IS LAMINATED
TO THE 50 LB KRAFT PAPER. 2ND PLY 50 LB NATURAL KRAFT PAPER. 3RD PLY 50
LB NATURAL KRAFT PAPER. 4TH PLY 50 LB BLEACHED WHITE NATURAL KRAFT
PAPER (EXTERIOR PLY). THE BLEACHED PAPER IS "FULLY BLEACHED WHITE". THE
BAG MUST BE VALVE/SPOUT TYPE, COMPLETELY SEALED AND MOISTURE AND
WATER PROOF.
1000021672

Material Number
9COM/9CAT
68
Chemicals
(Drilling Fluids)
XANTHAN GUM (POWDER)
ADMIXTURE COMPONENTS: XANTHAN GUM BIO-POLYMER; 25 KG (50 LB) BAG.
ADMIXTURE DRILLING MUD; DRY FREE FLOWING POWDER FORM,PURE XANTHAN
GUM BIO-POLYMER,FOR PRIMARILY USED FOR VISCOSITY/ SUSPENSION IN FRESH
WATER, SEA WATER, & SATURATED BRINE-BASED DRILLING, WORKOVER &
COMPLETION FLUIDS,PURE XANTHAN GUM BIO-POLYMER,25 KG OR 50 LB
BAG,SHIPMENT AND PACKING: 25 KG (50 LB) SEALED MULTI-WALL PAPER BAG
(WITH INNER POLYETHYLENE BAG TO PREVENT MOISTURE CONTACT), SHIPMENT
OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL.
1000021930
69
Chemicals
(Drilling Fluids)
ORGANOPHILIC CLAY - 400F
INVERTED EMULSION MUD COMPONENTS: 25 KG (50 LB) BAG; POWDER; DRY
WHITE, ADMIXTURE DRILLING MUD; WHITE, DRY, FREE FLOWING POWDER, FREE
OF LUMPS FORM,OIL-BASED DRILLING FLUID GELLING AGENT,FOR HELPS
VISCOSIFY ANY OIL- BASED DRILLING FLUIDS HELPS IMPROVED HOLE CLEA- NING
DURING DRILLING AND WORKOVER OPERATIONS DRILL OIL MUDS FOR LONG
TERM SUSPENSION OF WEIGHTING AGENTS IN PACKER FLUIDS & CASING
PACKS.,AMINE TREATED BETONITE, A BENTONITE CLAY THAT HAS BEEN TREATED
WITH AN AMINE COMPOUND TO PROMOTE ITS DISPERSION/YIELD IN OILS.,22.7
KG (50 LB) MULTI-WALL SACKS.,SPECIFIC GRAVITY: 1.57 TO 1.70 APPEARANCE:
OFF-WHITE TO TAN POWDER ODOR/TASTED: SLIGHT, AMINE SOLUBILITY:
INSOLUBLE IN WATER DISPERSIBLE IN ORGANIC SOLVENTS. DECOMPOSITION
TEMP: >200C DEG FLASH POINT: NON- FLAMMABLE REACTIVITY: CHEMICALLY
STAB,ORGANOPHILIC CLAY, USED TO IMPART VISCOSITY AND SUSPENSION
PROPERTIES TO OIL-BASED DRILLING FLUIDS ORGANOPHILIC CLAY VISCOSIFIER
TEMPERATURE APPROACHING APPROACHING 400 F DEG (20C DEG) IMPROVES
FILTER. CAKE QUALITY AND FILTARATION-CHARACTERISTICS PROVIDES GEL-
STRUCTURE AND VISCOSITY FOR THE- SUSPENSION OF WEIGHT MAERIALS
VICOSITY FOR IMPROVED- HOLE CLEANING CAPACITY EFFECTIVE GELLING AGENT
IN CASING PACKS AND PACKER FLUIDS.
1000022174

Material Number
9COM/9CAT
70
Chemicals
(Drilling Fluids)
POTASSIUM FORMATE (75% SOL,
WATER 25%)
ADMIXTURE DRILLING MUD; LIQUID FORM,POTASSIUM FORMATE SOLUTION
(KCOOH & H20),FOR FORMULATING SOLIDS FREE WORKOVER FLUIDS FOR USE IN
THE KHUFF AND PRE-KHUFF FORMATION,POTASSIUM FORMATE 75% AND
WATER 25% SOLUTION, CLEAR LIQUID, DENSITY 1570 KG/M3 @ 20 DEG C, PH
10.0 @ 25 DEG C,1000 LITER (1570 KG) IBC OR TOTE CONTAINER (CO),IRON LESS
THAN 10 PPM, CHLORIDE CONTENT LESS THAN 40 PPM, TURBIDITY MAX 10 NTU,
SOLUBLE IN ALL PROPORTIONS IN WATER EXPORT PACKING MANUAL.
1000774250
71
Chemicals
(Drilling Fluids)
POTASSIUM FORMATE CRYSTALS
(97% KCOOH)
ADMIXTURE DRILLING MUD; FREE FLOWING SOLID CRYSTALS FORM,POTASSIUM
FORMATE 97% WEIGHT (KCOOH),FOR FORMULATING SOLIDS FREE WORKOVER
FLUIDS FOR USE IN THE KHUFF AND PRE-KHUFF FORMATION,POTASSIUM
FORMATE 97% WEIGHT & CONDITIONING AGENT 3% WEIGHT, POWDER, WHITE
COLOR, BULK DENSITY 1080 KG/M3,25 KG MULTI-WALL SACK,SPECIFIC GRAVITY
(POWDER ONLY) 1.91, SOLUBILITY IN WATER 355 GR/100 ML @ 20 DEG C ,
MELTING POINT 169 DEG C TEMPERATURE STABILITY UP TO 400 ░F (204 ░C),
SHIPMENT OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING
MANUAL.
1000774251
72
Chemicals
(Drilling Fluids)
SODIUM FORMATE POWDER
(98% NACOOH)
ADMIXTURE DRILLING MUD; FREE FLOWING GRANULES FORM,SODIUM
FORMATE POWDER 98% (NACOOH),FOR FORMULATING SOLIDS FREE WORKOVER
FLUIDS FOR USE IN THE KHUFF AND PRE-KHUFF FORMATION,SODIUM FORMATE
98% WEIGHT & OTHER ORGANICS 2% WEIGHT, WHITE COLOR, BULK DENSITY 900-
950 KG/M3,25 KG MULTI-WALL SACK,SPECIFIC GRAVITY (POWDER ONLY) 1.92,
SOLUBILITY IN WATER 81GR/100 ML @ 20 DEG C , MELTING POINT 253 DEG C ,
TEMPERATURE STABILITY UP TO 400 ░F (204 ░C), SHIPMENT OF PRODUCT SHALL
CONFORM TO SAUDI ARAMCOEXPORT PACKING MANUAL.
1000774252
73
Chemicals
(Drilling Fluids)
LIGNITE
ADDITIVE DRILLING FLUID; POWDER FORM,LIGNITE / CRYSTALLINE SILICA,
QUARTZ,FOR USED TO AID IN FILTRATION CONTROL AND CONTROL VISCOSITY
AND GEL STRENGTHS OF WATER-BASED DRILLING FLUIDS,SACK PACKING (25 KG
OR 50 LB),USED TO APPEARANCE: BLACK POWDER, COLOUR: BLACK,
ODOUR/TASTE: ODORLESS, SPECIFIC GRAVITY: 1.7, SOLUBILITY IN WATER:
INSOLUBLE, BULK DENSITY AT 20 DEG C: 40 LBS/FT3, USED TO EMULSIFY OIL INTO
WATER-BASED FLUIDS, SHIPMENTS OF PRODUCT SHALL CONFORM TO SAUDI
ARAMCO EXPORT PACKING MANUAL.
1000827162

Material Number
9COM/9CAT
74
Chemicals
(Drilling Fluids)
POLYANIONIC CELLULOSE
REGULAR (PAC-R)
ADMIXTURE: DRILLING MUD POLYANIONIC CELLULOSE DERIVATIVE (REGULAR)
PAC-R ADMIXTURE DRILLING MUD; DRY, FREE FLOWING POWDER
FORM,POLYANIONIC CELLULOSE,FOR USED AS A FILTRATE REDUCER AND
SUPPLEMENTARY VISCOSIFIER TO FORM A THIN, RESILIENT FILTER CAKE. IT IS
EFFECTIVE IN FRESH WATER, SEA WATER AND SALT SATURATED FLUIDS,PURE,
SALT-FREE POLYANIONIC CELLULOSE POLYMER,MULTI-WALLED BAGS, 25 KG OR
50 LB BAG,API 13 I SUPPLEMENT-2, SECTION 22 (MAY, 2000 OR LATEST
EDITION),OTHER ASSOCIATED ELEMENTS IN THE COMPOSITION MUST NOT BE
HARMFUL TO PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES.
PROPER TUBE SAMPLING AND QUARTERING TO BE CARRIED OUT BY TRAINED
AND EXPERIENCED PERSONNEL. POLYANIONIC CELLULOSE, PAC-R SHALL NOT
CONTAIN ANY OTHER POLYSACCHARIDES SUCH AS STARCH, GUAR, OR OTHER
POLYMERS OR THEIR DERIVATIVES NOTE: THE CONSTRUCTION OF THE MULTI-
WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 50 LB MIN.
NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 50 LB MIN. NATURAL KRAFT
PAPER 3RD PLY SEPARATE INNER BAG LINER, HIGH DENSITY ORIENTED AND
CROSS-LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE
RESIN MATERIAL WITH A MINIMUM WALL THICKNESS OF 0.1 MM. 4TH PLY 50 LB
MIN.
1000021605
75
Chemicals
(Drilling Fluids)
CHROME FREE LIGNOSULFONATE
ADMIXTURE: DRILLING MUD; 25 KG (50 LB) SACK; SHIPMENT OF PRODUCT SHALL
CONFORM TO SAUDI ARAMCO EXPORT ADMIXTURE DRILLING MUD; POWDER
FORM,MODIFIED CHROME FREE LIGNOSULFONATE,FOR DISPERSANT FOR
REDUCING VISCOSITY & GELS IN SALTY, GYPPY & FRESH WATER MUDS,25 KG OR
50 LB BAG,API 13A,FREE FLOWING, SHIPMENT OF PRODUCT SHALL CONFORM TO
SAUDI ARAMCO EXPORT PACKING MANUAL NOTE: THE CONSTRUCTION OF THE
MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 50 LB
MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 50 LB MIN. NATURAL
KRAFT PAPER 3RD PLY SEPARATE INNER BAG LINER, HIGH DENSITY ORIENTED
AND CROSS-LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF
POLYETHYLENE RESIN MATERIAL WITH A MINIMUM WALL THICKNES OF 0.1 MM.
4TH PLY 50 LB MIN. NATURAL KRAFT PAPER. 5TH PLY 60 LB MIN. NATURAL KRAFT
PAPER WET STRENGTH (EXTERIOR PLY) THE BAG MUST BE VALVE/SPOUT TYPE,
COMPLETELY SEALED, MOISTURE AND WATER PROOF.
1000021670
76
Chemicals
(Drilling Fluids)
DETERGENT
AGENT: WELL STIMULANT; 20 LITER (5GAL.) CAN. . AGENT WELL STIMULANT; FOR
SURFACTANT & DETERGENT FOR DRILLING WATER & LOW SOLID MUD,LIQUID
FORM,20 L OR 5 GAL CAN.
1000021975

Material Number
9COM/9CAT
77
Chemicals
(Drilling Fluids)
CALCIUM CHLORIDE (77-78%)
2200 lb/BAG
ADMIXTURE, CEMENT: ADDITIVE, CEMENT, 1000 KG PER BAG, CALCIUM
CHLORIDE ADMIXTURE CEMENT; FOR WATER SOLUBLE WEIGHTING AGENT FOR
FORMULATING SOLIDS-FREE COMPLETION BRINES AND TO PROVIDE THE DESIRED
WATER PHASE ACTIVITY IN INVERT EMULSION MUDS. ALSO USED AS AN
ACCELERATOR IN OIL WELL CEMENT SLURRIES,TYPE 1,77-78% CALCIUM
CHLORIDE (CACL2), FLAKES OR PELLETS,1000 KG OR 2200 LBS BAG,ASTM D98-
68,LIFTING STRAP, BAG IS DISPOSABLE, TOP CLOSURE WATERTIGHT, STACKABLE
& WITHOUT BOTTOM SPOUT, MINIMUM TENSILE STRENGTH FACTOR 5,
FLEXURAL STRENGTH FOR NORMAL HANDLING & OUTSIDE STORAGE NO
PARTICLES GREATER THAN 2MM IN ANY DIMENSION, MULTI-WALL MOISTURE-
PROOF POLYETHYLENE LINED BAGS W/LIFTING STRAPS, WITHOUT BOTTOM
SPOUT. DRY, FREE FLOWING FLAKES, GRANULES OR PELLETS.
1000022533
78
Chemicals
(Drilling Fluids)
NVIS HI - 50 LB
ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,SILICATE,FOR VISCOSIFIER
USED IN MILLING CASING WINDOWS,CALCIUM ALUMINOSILICATE,50 LB SEALED
MULTI-WALL PAPER BAG,GRAY COLOR, SPECIFIC GRAVITY 0.6@ 20 DEG C, PH 11,
INSOLUBLE IN WATER, ODERLESS, SHIPMENT OF PRODUCT SHALL CONFORM TO
SAUDI ARAMCO EXPORT PACKING MANUAL THE ORIGINAL MANUFACTURER ,
PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL,
EXPIRATION DATE IF REQUIRED, STOCK NUMBER AND COUNTRY OF ORIGIN BE
PRINTED ON THE CONTAINER, THE CONSTRUCTION OF THE MULTI-WALLED
PAPER BAG FOLLOWS: (CONTAINER) SHALL BE AS 1ST PLY 50 LB MIN. NATURAL
KRAFT PAPER (INTERIOR PLY) 2ND PLY 50 LB MIN. NATURAL KRAFT PAPER 3RD
PLY SEPARATE INNER BAG LINER , HIGH DENSITY ORIENTED AND CROSS-
LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE RESIN
MATERIAL WITH A MINIMUM WALL THICKNESS OF 0.1 MM. 4TH PLY 50 LB MIN.
1000757569

Material Number
9COM/9CAT
79
Chemicals
(Drilling Fluids)
H2S SCAVENGER, POWDER
ADMIXTURE DRILLING MUD; POWDER, GRANULAR FORM,ORGANOMETAL,FOR
SCAVENGES HYDROGEN SULFIDE FROM DRILLING FLUIDS,IRON GLUCONATE,25
KG SEALED MULTI-WALL PAPER BAG,SOLID, LIGHT YELLOW GREEN COLOR, BULK
DENSITY 650 - 850 KG/M3 @ 20 DEG C, PH 4.5 (1% AQUEOUS SOLUTION),
SOLUBLE IN WATER, MILD BURNT SUGAR ODOR, SHIPMENT OF PRODUCT SHALL
CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL THE ORIGINAL
MANUFACTURER , PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF
MATERIAL, EXPIRATION DATE IF REQUIRED, STOCK NUMBER AND COUNTRY OF
ORIGIN BE PRINTED ON THE CONTAINER, THE CONSTRUCTION OF THE MULTI-
WALLED PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS 1ST PLY 75 LB MIN.
NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY 75 LB MIN. NATURAL KRAFT
PAPER 3RD PLY SEPARATE INNER BAG LINER, HIGH DENSITY ORIENTED AND
CROSS-LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE
RESIN MATERIAL WITH A MINIMUM WALL THICKNES OF 0.1 MM. 4TH PLY 80 LB
MIN. NATURAL KRAFT PAPER (EXTERIOR PLY).
1000757581
80
Chemicals
(Drilling Fluids)
ACID SOLUBLE FIBER
ADMIXTURE DRILLING MUD; POWDER, SOLID FORM,SPUN MINERAL FIBER,FOR
CONTROLS SEEPAGE, BRIDIGING, PLUGGING VOIDS, FRACTURES DURING
WORKOVER OPERATIONS,CRYSTALLINE SILICA, QUARTZ AND BLAST FURNACE
SLAG,30 LB SEALED MULTI-WALL PAPER BAG,WHITE TO GRAY COLOR, SPECIFIC
GRAVITY 2.6@ 20 DEG C, PH 7-8, BULK DENSITY 12-26 LBS/GALLON @ 20 DEG C
INSOLUBLE IN WATER, ODERLESS, SHIPMENT OF PRODUCT SHALL CONFORM TO
SAUDI ARAMCO EXPORT PACKING MANUAL THE ORIGINAL MANUFACTURER ,
PRODUCT NAME, BATCH NUMBER, DATE OF PRODUCTION OF MATERIAL,
EXPIRATION DATE IF REQUIRED, STOCK NUMBER AND COUNTRY OF ORIGIN BE
PRINTED ON THE CONTAINER, THE CONSTRUCTION OF THE MULTI-WALLED
PAPER BAG (CONTAINER) SHALL BE AS FOLLOWS: 1ST PLY 30 LB MIN. NATURAL
KRAFT PAPER (INTERIOR PLY) 2ND PLY 30 LB MIN. NATURAL KRAFT PAPER 3RD
PLY SEPARATE INNER BAG LINER, HIGH DENSITY ORIENTED AND CROSS-
LAMINATED INNER LINER (TUBULAR SHAPE) MADE OF POLYETHYLENE RESIN
MATERIAL WITH A MINIMUM WALL THICKNES OF 0.1 MM. 4TH PLY 30 LB MIN.
NATURAL KRAFT PAPER. 5TH PLY 30 LB MIN. NATURAL KRAFT PAPER WET
STRENGTH (EXTERIOR PLY).
1000757582

Material Number
9COM/9CAT
81
Chemicals
(Drilling Fluids)
SULPHONATE ASPHALT
ADMIXTURE: DRILLING MUD; 25 KG (50 LB) SACK; SHIPMENT OF PRODUCT SHALL
CONFORM TO SAUDI ARAMCO EXPORT ADMIXTURE DRILLING MUD; BLACK, DRY,
FREE FLOWING POWDER OR FLAKES, FREE OF LUMPS FORM,MODIFIED
HYDROCARBON COMPOUND SODIUM ASPHALT SULPHONATE. OTHER
ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL AND/OR
ADVERSELY AFFECT FLUID PROPERTIES.,FOR STABILIZES SHALE FORMATIONS
REDUCES TORQUE AND DRAG, INHIBITS THE DISPERSION OF DRILL SOLIDS,
REDUCES FILTRATE, EMULSIFIER COMPATIBLE TO ALL MUD SYSTEMS, AS IT IS
SOLUBLE IN BOTH OIL & WATER. HAS GOOD EMULSIFYING CHARACTERISTICS.
REDUCES THE FREQUENCY OF STUCK PIPE HAS NO ADVERSE EFFECTS ON MUD
PROPERTIES.,A BLEND OF HYDROXYLATED SODIUM ASPHALT SULPHONATE WITH
MINOR AMOUNTS OF ASPHALT PHENALATES, INORGANIC SALTS & OXIDIZED
ASPHALT. EXHIBITS SOME FLUORESCENCE. HOWEVER, THIS PROBLEM IS USUALLY
ELIMINATED THROUGH THE WASHING OF CUTTINGS.
1000021607
82
Chemicals
(Drilling Fluids)
HYDRATED CALCIUM SULFATE -
GYPSUM
ADMIXTURE: DRILLING MUD; 25 KG/SACK; CALCIUM SULFATE (GYPSUM)
ADMIXTURE DRILLING MUD; DRY, FREE FLOWING FINE WHITISH POWDER
FORM,HYDRATED CALCIUM SULFATE,FOR A SOURCE OF CALCIUM IONS TO TREAT
CARBONATE CONTAMINATION IN HIGH PH MUDS, AND TO AVOID HOLE
ENLARGEMENT WHEN ANHYDRITE IS DRILLED,25 KG OR 55 LBS/SACK,SHIPMENT
OF PRODUCT SHALL CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL
MULTI-WALLED PAPER BAGS, CONTAINER PROPERLY LABELED, W/VENDOR'S
NAME, MANUFACTURER'S NAME LOCATION, PRODUCTION DATE AND BATCH
NO.,SAUDI ARAMCO STOCK NUMBER AND SAUDI ARAMCO P.O. NUMBER NOTE:
THE CONSTRUCTION OF THE MULTI-WALLED PAPER BAG (CONTAINER) SHALL BE
AS FOLLOWS: 1ST PLY 75 LB MIN. NATURAL KRAFT PAPER (INTERIOR PLY) 2ND PLY
75 LB MIN. NATURAL KRAFT PAPER. 3RD PLY 80 LB MIN. NATURAL KRAFT PAPER
(EXTERIOR BF PLY) THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY SEALED,
PACKING SPEC CODES 8444-18 APPLIES.
1000021559
83
Chemicals
(Drilling Fluids)
XANTHAN GUM (LIQUID
SUSPENSION)
ADDITIVE; 5 GAL PER PAIL,ADDITIVE: DRILLING MUD LIQU XANTHAN GUM USED
TO BUILD VISCOSITY AND GEL STRENGTH IN WATER BASED DRILLING WORKOVER
AND COMPLLETION FLUIDS. ALSO UNIQUE WITH ITS ABILITY TO FLOW AND MIX
HOMOGENOUSLY WITHOUT CREATING "LUMP"AND PROVIDES LOW-SOLIDS
CONTENTS IN THE MIXED FLUID 5 GAL/PAIL. APPEARANCE: CREAM LIQUID,
SG@20C (WATER=1): 0.95-1.05 SOLUBILITY IN WATER: MISCIB PH: (1%SOL.IN DIS
WATER, 77.
1000815368

Material Number
9COM/9CAT
84
Chemicals
(Drilling Fluids)
SIZED CACO3 AND POLYMERS
LCM
ADMIXTURE DRILLING MUD; ADMIXTURE FORM,BLEND OF SIZED CACO3 AND
POLYMERS,FOR REDUCES FLUID INVASION WITHOUT DAMAGING THE
FORMATION BY SEALING GAUGE SCREEN FROM INTERNAL SIDE TO BE EASILY
REMOVED WITH PRODUCTION FLUID FLOW.,BLEND OF SIZED CACO3 AND
POLYMERS,BBL.
1000876985
85
Chemicals
(Drilling Fluids)
Spacer-Tek - SBP-9125
SURFACTANT
AGENT WELL STIMULANT; FOR MIXED WITH OTHER SURFACTANTS TO PROVIDE
OPTIMUM CLEANING OF SYNTHETIC AND OIL-BASED MUD SURFACTANT WITH
LOWER HLB NUMBER FOR LOWER TEMPERATURE CLEANING APPLICATION
SPACER-TEK SYSTEM CONSISTS OF SBP-24 DEFOAMER , SBP-85 GEL-E POLYMER,
SBP-101 SOLVENT, SBP,ETHOXYLATED ALCOHOL BASE,LIQUID
FORM,DRUM,APPEARANCE: LIGHT YELLOWIS CLEAR SOLUTION DENSITY: 0.92 PH:
7-8 PLASH POINT: 255 F.
1000877462
86
Chemicals
(Drilling Fluids)
SURFACTANT
OPTIMUM CLEANING OF SYNTHETIC AND OIL-BASED MUD OVER A WIDE RANGE
OF TEMPERATURES SPACER-TEK SYSTEM CONSISTS OF SBP-24 DEFOAMER , SBP-
85 GEL-E POLYMER, SBP-101 SOLVENT, SBP-4620 SURFACTANT, SBP-9125
SURFACTANT SBP,BLEND OF NON-IONIC SURFACTANTS AND LINEAR ALCOHOL CO-
SOLVENT,LIQUID FORM,DRUM,APPEARANCE: LIGHT YELLOWIS CLEAR SOLUTION
DENSITY: 1.002 PH: 7-8 PLASH POINT: > 200 F.
1000877461
87
Chemicals
(Drilling Fluids)
Spacer-Tek - SBP-101 SOLVENT
AGENT WELL STIMULANT; FOR USED AS THE PRIMARY CLEANING PILL FOR
DISPLACEMENT CLEANUP OF SYNTHETIC AND OIL-BASED DRILLING MUD. THE
SOLVENT PRODUCT IS TYPICALLY MIXED WITH BRINE TO PROVIDE DISPERSED
MACRO DROPLETS OF SOLVENT IN BRINE AND ALSO A HIGHER SOLVENT PILL
DENSITY FOR SUPER,BLENDS OF SURFACTANTS AND SOLVENTS,LIQUID
FORM,DRUM,APPEARANCE: LIGHT YELLOWIS CLEAR SOLUTION DENSITY: 0.85-
0.87 PLASH POINT: 122 F.
1000877460
88
Chemicals
(Drilling Fluids)
Spacer-Tek - SBP-SPACER MIX
AGENT WELL STIMULANT; FOR TO DEVELOP THE VISCOSITY AND GELLING AND TO
BE EASILY HYDRATED EVEN UNDER A LIMITED MIXING CONDITION. ALSO, IT
ENHANCES THE HIGH TEMPERATURE VISCOSITY PERFORMANCE IN SOLID-FREE
POLYMER GEL. TYPICAL TREATMENT: 8-25 LB/BBL. SPACER-TEK SYSTEM CONSISTS
OF,PATENTED BLEND OF VISCOSIFIERS AND DISPERSANT,POWDER
FORM,BAG,APPEARANCE: BEIGE-COLORED P S.G.: 1.76.
1000877299

Material Number
9COM/9CAT
89
Chemicals
(Drilling Fluids)
Spacer-Tek - SBP-600 BIOCIDE
AGENT WELL STIMULANT; FOR TO CONTROL ALL FORMS OF BACTERIA WHICH IS
PARTICULARLY DETRIMENTAL IN FRESH AND BRINE-WATER DRILLING AND
PACKER FLUIDS TYPICAL TREATMENT: 5 GAL/100 BBL. SPACER-TEK SYSTEM
CONSISTS OF SBP-24 DEFOAMER , SBP-85 GEL-E POLYMER, SBP-101 SOLVENT, SBP
4620,BLENDED ORGANIC SULFUR ANTIMICROBIAL AGENT,POWDER
FORM,PAIL,APPEARANCE: WHITE CRYSTAL SPECIFIC GRAVITY: 0.96.
1000877298
90
Chemicals
(Drilling Fluids)
Spacer-Tek - SBP-85 GEL-E
AGENT WELL STIMULANT; FOR NON-DAMAGING VISCOSIFIER THAT READILY
DISPERSIBLE IN ALL BRINE SYSTEMS AND EASIER TO USE THAN DRY VISCOSIFIERS .
IT IS SOLUBLE IN HYDROCHLORIC, ACETIC AND FORMIC ACIDS AND DEGRADABLE
AT TEMPERATURES ABOVE 275°F,BLEND OF XANTHAN GUM/ORGANIC
SOLVENT,LIQUID FORM,PAIL,APPEARANCE: BEIGE COLORED SPECIFIC GRAVITY:
1.07 PH: 7 FLASH POINT: 160 F.
1000877297
91
Chemicals
(Drilling Fluids)
Spacer-Tek - SBP-24 DEFOAMER
AGENT WELL STIMULANT; FOR TO CONTROL FOAMING IN SPACER OR CLEANING
FLUID FORMULATIONS TYPICALLY TREATMENT: 100-500 PPM. SPACER-TEK
SYSTEM CONSISTS OF SBP-24 DEFOAMER , SBP-85 GEL-E POLYMER, SBP-101
SOLVENT SBP-4620 SURFACTANT, SBP-9125 SURFACTANT, SBP-9755 SURFACTANT
SBP-600,SILICONE EMULSION BASE,LIQUID FORM,PAIL,APPEARANCE: WHITE
CREAMY SPECIFIC GRAVITY: 0.99 PH: 7-8.
1000877296
92
Chemicals
(Drilling Fluids)
SURFACTANT
OPTIMUM CLEANING OF SYNTHETIC AND OIL-BASED MUD OVER A WIDE RANGE
OF TEMPERATURES. SPACER-TEK SYSTEM CONSISTS OF SBP-24 DEFOAMER ,SBP-
85 GEL-E POLYMER, SBP-101 SOLVENT, SBP-4620 SURFACTANT, SBP-9125
SURFACTANTS,ALKYL POLYGLUCOSIDE BASE,LIQUID FORM,DRUM,APPEARANCE:
LIGHT YELLOWIS CLEAR SOLUTION DENSITY: 1.1 PH: 7-8 PLASH POINT: 212 F.
1000877463
93
Chemicals
(Drilling Fluids)
MODIFIED POLYMER FOR FLUID
LOSS
ADDITIVE DRILLING FLUID; POWDER FORM,BLEND OF MODIFIED POLYMERS,FOR
PROVIDES CENTRAL TO THE ULTRA-LOW INVASIVE FLUID AND GREATLY REDUCES
FLUID INVASION INTO MATRIX. TYPICAL TREATMENT: 3- 8 LB/BBL.,BLEND OF
MODIFIED POLYMERS,25 POUND MULTI-WALLED SACKS,APPEARANCE: POWDER
TO FLAKE. SPECIFIC GRAVITY: 1.0.
1000883084

Material Number
9COM/9CAT
94
Chemicals
(Drilling Fluids)
LUBRICANT OBM
ADDITIVE DRILLING FLUID; LIQUID FORM,MIXTURE OF FATTY ACIDS AND
SPECIALTIES,FOR DRILLING LUBE IS USED TO HELP IMPROVE LUBRICITY OF OIL-
BASED MUD SYSTEMS, THEREBY HELPING TO REDUCE TORQUE AND DRAG, AND
REDUCING RISK OF DIFFERENTIAL STICKING IN DEEP, TORTUOUS, HIGH ANGLE OR
EXTENDED REACH WELLS,MIXTURE,55-GALLON (208 LITRE) DRUM,APPEARANCE:
AMBER LIQUID. POUR.
1000885304
95
Chemicals
(Drilling Fluids)
THERMASET 100-2
ADDITIVE DRILLING FLUID; LIQUID FORM,POLYESTER RESIN BASE,FOR THERMALLY
ACTIVATED LIQUID LOST CIRCULATION MATERIAL THAT MAKES AN
INSTANTANEOUS SEAL ACROSS ANY FRACTURE OR VUGS TO STOP
LOSTCIRCULATION OF DRILLING FLUID AND ALSO SEAL OFF CASING
LEAKS.,POLYESTER RESIN BASE,IBC,APPEARANCE: YELLOW LIQUID. DEN,WORKING
TEMPERATURE RANGE IS 212 °F - 302 °F FOR HIGH TEMPERATURE APPLICATIONS.
THERMASET SYSTEM CONSISTS OF THERMASET 100-2 OR 55-4, AEROSOL 200,
NORPOL PEROXIDE 40(CI 40), DIBENZOYL PEROXIDE (CI 65) MICROMAX FILLER
AND GLASS FILLER.
1000888051
96
Chemicals
(Drilling Fluids)
THERMASET 55-4
ADDITIVE DRILLING FLUID; LIQUID FORM,POLYESTER RESIN BASE,FOR THERMALLY
ACTIVATED LIQUID LOST CIRCULATION MATERIAL THAT MAKES AN
INSTANTANEOUS SEAL ACROSS ANY FRACTURE OR VUGS TO STOP LOST
CIRCULATION OF DRILLING FLUID AND ALSO SEAL OFF CASING LEAKS.,POLYESTER
RESIN BASE,IBC,APPEARANCE: YELLOW LIQUID. DEN,WORKING TEMPERATURE
RANGE IS 140 °F - 275 °F FOR LOW TEMPERATURE APPLICATIONS. THERMASET
SYSTEM CONSISTS OF THERMASET 100-2 OR 55-4, AEROSOL 200, NORPOL
PEROXIDE 40(CI 40), DIBENZOYL PEROXIDE (CI 65) MICROMAX FILLER AND GLASS
FILLER.
1000888052
97
Chemicals
(Drilling Fluids)
THERMASET Glass Filler
ADDITIVE DRILLING FLUID; SOLID (PULVERIZED POWDER) FORM,GLASS
BEADS,FOR IT IS CHEMICALLY INERT WEIGHTING MATERIAL FOR LOW DENSITY
FLUIDS. IT IS USED IN THERMASET LCM SYSTEM. IT IS STABLE AT TEMPERATURES
UP TO 1112 °F.,GLASS BEADS,BAG,APPEARANCE: SOLID CLEAR AND ODORLESS.
SG1: 0.
1000888050
98
Chemicals
(Drilling Fluids)
THERMASET Aerosol/orisil 200
ADDITIVE DRILLING FLUID; SOLID FORM,SILICON DIOXIDE,FOR ESPECIAL
VISCOSIFIER FOR THERMASET LCM SYSTEM. IT CAN BE USED IN TEMPERATURE
RANGE OF 32 °F - 1112 °F.,SILICON DIOXIDE,BAG,APPEARANCE: SOLID ODORLESS.
SG: 2.2.
1000888053
99
Chemicals
(Drilling Fluids)
THERMASET CI-40
ADDITIVE DRILLING FLUID; LIQUID FORM,TERT-BUTYL PERBENZOATE,FOR CURING
AGENT (ACCELERATOR) FOR THERMASET LCM SYSTEM FOR HIGH TEMPERATURE
APPLICATIONS (205 °F - 266 °F),TERTIARY-BUTYL
PEROXYBENZOATE,CAN,APPEARANCE: LIQUID. DENSITY: 1.
1000888054

Material Number
9COM/9CAT
100
Chemicals
(Drilling Fluids)
THERMASET CI-65
ADDITIVE DRILLING FLUID; LIQUID DISPERSION FORM,DIBENZOYL PEROXIDE,FOR
CURING AGENT (ACCELERATOR) FOR THERMASET LCM SYSTEM FOR LOW
TEMPERATURE APPLICATIONS (32 °F – 205 °F),DIBENZOYL PEROXIDE/ C 9-11
BRANCHED ALKYLBENZOATE,CAN,APPEARANCE: LIQUID. COLOR: WHI.
1000888055
101
Chemicals
(Drilling Fluids)
THERMASET CLEANER
ADDITIVE DRILLING FLUID; LIQUID FORM,DIMETHYL SUCCINATE, DIMETHYL
GLUTARATE, DIMETHYL ADIPATE,FOR IT IS A CLEANING AGENT USED IN
THERMASET SYSTEM APPLICATIONS TO CLEAN OILY AREAS IN TANKS, PIPES,
ETC.,DIMETHYL SUCCINATE, DIMETHYL GLUTARATE, DIMETHYL
ADIPATE,IBC,APPEARANCE: LIQUID. COLOR: LIG.
1000888056
102
Chemicals
(Drilling Fluids)
DI-TROL
ADDITIVE DRILLING FLUID; SOLID FORM,SPECIAL BRANCHED CHAIN MODIFIED
STARCH DERIVATIVE,FOR PROVIDES BOTH VISCOSITY AND FLUID LOSS CONTROL
IN DIVALENT DRILLING FLUID SYSTEM MIXED IN CALCIUM CHLORIDE OR CALCIUM
BROMIDE BRINES IN MI-SWACO DI-PRO SYSTEM.,HIGH MOLECULAR WEIGHT,
BRANCHED-CHAIN STARCH DERIVATIVE,A 25 KG MULTI-WALLED SACK,TYPICAL
PHYSICAL AND CHEMICAL,ORDER UNIT OF MEASURE AND UNIT OF ISSUE SHOULD
BE IN SACKS (1 SACK = 25 KGS). CONTAINER MUST BE PROPERLY LABELED WITH
VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND
BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT PROPER SAMPLING AND
TESTING AS NEEDED. NOTE: DI-TROL IS NOT COMPATIBLE FOR USE IN MONO-
VALENT BRINES.#IT WORKS SYNERGISTICALLY WITH OTHER COMPONENTS OF DI-
PRO SYSTEM MAINLY DI-BALANCE (MM: 1000892842) AND DI-BOOST (MM:
1000892844). IT WORKS SYNERGISTICALLY WITH DI-BALANCE TO ENHANCE THE
LSRV.
1000892845
103
Chemicals
(Drilling Fluids)
DI-BALANCE
ADDITIVE DRILLING FLUID; SOLID FORM,FINE PARTICLE-SIZE MAGNESIUM
COMPOUND,FOR CONTROLS THE PH OF BRINE-BASED AQUEOUS DRILLING FLUID
SYSTEMS MIXED IN ZINC BROMIDE, CALCIUM CHLORIDE OR CALCIUM BROMIDE
IN MI-SWACO'S DI-PRO MUD SYSTEM.,MINIMUM PERCENTAGE AS MGO: 98,A 25
KG MULTI-WALLED SACK,PHYSICAL PROPERTIES: APPEARANC,ORDER UNIT OF
MEASURE AND UNIT OF ISSUE SHOULD BE IN SACKS (1 SACK = 25 KGS).
1000892842

Material Number
9COM/9CAT
104
Chemicals
(Drilling Fluids)
DI-BOOST
ADDITIVE DRILLING FLUID; LIQUID FORM,DIETHYLENE GLYCOL,FOR A VISCOSITY
ENHANCER AND STABILIZER IN DI-VALENT DRLG FLUID SYSTEMS MIXED IN
CALCIUM CHLORIDE OR CALCIUM BROMIDE BRINES IN MI-SWACO DI-PRO
SYSTEM. IT REDUCES DI-PRO SYSTEM VISCOSITY IF CONCENTRATION EXCEEDS 1.0
% BY VOLUME.,DIETHYLENE GLYCOL: 100% PURITY,7.6 LITERS CAN,PHYSICAL AND
CHEMICAL PROPERTI,ORDER UNIT OF MEASURE AND UNIT OF ISSUE SHOULD BE
IN CANS (1 CAN = 7.6 LITERS). CONTAINER MUST BE PROPERLY LABELED WITH
VENDOR'S NAME, MANUFACTURER'S NAME, LOCATION, PRODUCTION DATE AND
BATCH NUMBER. SAUDI ARAMCO WILL CARRY OUT PROPER SAMPLING AND
TESTING AS NEEDED. NOTE: DI-BOOST WORKS SYNERGISTICALLY WITH OTHER
COMPONENTS OF DI-PRO SYSTEM MAINLY DI-BALANCE (MM: 1000892842) AND
DI-TROL (MM: 1000892845).
1000892844
105
Chemicals
(Drilling Fluids)
LE SPERMUL - OBM emulsion
control
ADDITIVE DRILLING FLUID; LIQUID FORM,EMULSIFIER FOR INVERT EMULSION
MUD,FOR THIS IS PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM. A
LIQUID PRIMARY EMULSIFIER AND OIL-WETTING AGENT FOR USE IN MINERAL OIL-
OR DIESEL OIL OR SYNTHETIC OIL-BASED DRILLING FLUID SYSTEMS OF INNOVERT,
INTEGRADE OR ENCORE DRILLING FROM HALLIBURTON BAROID.,A PROPRIETARY
EMULSIFIER MIXTURE,DRUM,APPEARANCE: CLEAR AMBER VISCOU,REQUIRED
QTY: 55 GAL PER DRUM.
1000904194
106
Chemicals
(Drilling Fluids)
FACTANT - OBM emulsifer
ADDITIVE DRILLING FLUID; LIQUID FORM,EMULSIFIER AND WETTING AGENT FOR
INVERT EMULSION MUD,FOR THIS IS PART OF HIGH PERFORMANCE CLAY-FREE
OBM SYSTEM. A LIQUID EMULSIFIER AND OIL-WETTING AGENT FOR USE IN
MINERAL OIL- OR DIESEL OIL OR SYNTHETIC OIL-BASED DRILLING FLUID SYSTEMS
OF INNOVERT, INTEGRADE OR ENCORE DRILLING FROM HALLIBURTON BAROID.,A
PROPRIETARY EMULSIFIER MIXTURE,DRUM,APPEARANCE: DARK VISCOUS
LIQUI,REQUIRED QTY: 55 GAL PER DRUM.
1000904195
107
Chemicals
(Drilling Fluids)
BHD-513 - OBM filtrate control
ADDITIVE DRILLING FLUID; SOLID FORM,CROSS-LINKED POLYMER SOLID,FOR THIS
IS PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM. A CROSS-LINKED
POLYMER SOLID THAT PROVIDES FILTRATION CONTROL FOR USE IN MINERAL OIL-
OR DIESEL OIL OR SYNTHETIC OIL-BASED DRILLING FLUID SYSTEMS OF INNOVERT,
INTEGRADE OR ENCORE OF HALLIBURTON BARO,A CROSS-LINK POLYMER
SOLID,BAG,APPEARANCE: SOLID. SPECIFIC GR,REQUIRED QTY: 25 KG PER BAG.
1000904196

Material Number
9COM/9CAT
108
Chemicals
(Drilling Fluids)
BDF-489 - OBM viscofifier
ADDITIVE DRILLING FLUID; SOLID FORM,ORGANIC BASED VISCOSIFER,FOR THIS IS
PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM. AN ORGANIC BASED
RHEOLOGY MODIFIER FOR USE IN MINERAL OIL- OR DIESEL OIL OR SYNTHETIC OIL-
BASED DRILLING FLUID SYSTEMS OF INNOVERT, INTEGRADE OR ENCORE OF
HALLIBURTON BAROID.,ORGANIC BASED VISCOSIFIER,25 KG BAG,APPEARANCE:
SOLID WHITE. MELTING POINT: 55,REQUIRED QTY: 25 KG PER BAG.
1000904197
109
Chemicals
(Drilling Fluids)
ADAPTA - OBM filtrate control
ADDITIVE DRILLING FLUID; SOLID FORM,METHYLSTYRENE ACRYLATE
COPOLYMER,FOR THIS IS PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM.
PRIMARY FILTRATION CONTROL AGENT FOR USE IN MINERAL OIL- OR DIESEL OIL
OR SYNTHETIC OIL-BASED DRILLING FLUID SYSTEMS OF INNOVERT, INTEGRADE
OR ENCORE OF HALLIBURTON BAROID.,METHYLSTYRENE ACRYLATE
COPOLYMER,25 KG BAG,APPEARANCE: SOLID WHITE. SPECIFIC GRAVITY
:,REQUIRED QTY: 25 KG PER BAG.
1000904198
110
Chemicals
(Drilling Fluids)
RHEOMOD-L- OBM viscosifer
ADDITIVE DRILLING FLUID; LIQUID FORM,MODIFIED TRIMER FATTY ACID,FOR THIS
IS PART OF HIGH PERFORMANCE CLAY-FREE OBM SYSTEM. LIQUID POLYMERIC
VISCOSIFIER AGENT FOR USE IN MINERAL OIL- OR DIESEL OIL OR SYNTHETIC OIL-
BASED DRILLING FLUID SYSTEMS OF INNOVERT, INTEGRADE OR ENCORE OF
HALLIBURTON BAROID.,MODIFIED TRIMER FATTY ACID,55 GAL
DRUM,APPEARANCE: LIQUID DARK. SPECIFIC GRAVITY : 0,REQUIRED QTY: 55 GAL
PER DRUM.
1000904199
111
Chemicals
(Drilling Fluids)
TAU-MUD - OBM viscofifier
ADDITIVE DRILLING FLUID; POWDER FORM,CYRISTALLINE SILICA AND
SEPIOLITE,FOR A HIGH TEMPERATURE VISCOSIFER, ONE OF THE COMPONENT OF
CLAY FREE OIL-BASED DRILLING FLUID SYSTEMS OF HALLIBURTON # BAROID
INNOVERT (LOW TOXICITY MINERAL OIL BASE) AND INTEGRADE (DIESEL BASE).
1000908546
112
Chemicals
(Drilling Fluids)
RHEOLOGY MODIFIER -
OMNIPLEX
ADDITIVE DRILLING FLUID; LIQUID FORM,ANIONIC SYNTHETIC POLYMER IN
EMULSION FORM,FOR A LIQUID POLYMERIC PREMIER VISCOSIFIER WHICH HELPS
TO IMPROVE THE RHEOLOGICAL AND SUSPENSION CHARACTERISTIC OF LOW
TOXICITY MINERAL OIL- AND SYNTHETIC OIL-BASED DRILLING FLUIDS OR IN
DIESEL OIL-BASED MUD. IT HELPS INCREASE PRIMARILY LOW SHEAR
RHEOLOGICAL,ANIONIC SYNTHETIC POLYMER IN EMULSION
FORM,DRUM,PHYSICAL PROPERTIES: APPEAR BOILING POINT: ~ 100 OC
MELT/FREEZE POINT: -12 OC PH VALUE CONC. SOLN: 2 # 5 FLASH
PO,PARAMETERS VALUE #FANN-35 F1 SPRING 6 RPM READING @ 120 OF EQUAL
OR GREATER THAN 9 #FANN-35 F1 SPRING 3 RPM READING @ 120 OF EQUAL OR
GREATER THAN 8#LOW SHEAR YIELD POINT LSYP @120 OF EQUAL OR GREATER
THAN 7#.
1000904472

Material Number
9COM/9CAT
113
Chemicals
(Drilling Fluids)
OIL SOLUBLE H2S SCAVENGER
ADDITIVE DRILLING FLUID; LIQUID FORM,HYDROCARBON,FOR OIL SOLUBLE
HYDROGEN SULFIDE SEQUESTERING AGENT/SCAVENGER AQUEOUS SOLUTION
MIXTURE OF INORGANIC COMPOUNDS, FOR THE REMOVAL OF H2S IN VARIOUS
APPLICATIONS AND NOT LIMITED TO ZERO FLARING/FLOWBACK, CRUDE OIL
ROAD TRANSPORTATION, DRILLING MUD, REFINING AND P,PROPRIETARY BLEND
OF ZINC COMPOUNDS IN HYDROCARBON BASE,DRUM,APPEARANCE/ODOR:
VISCOUS YELLOW TO YELLOW-GREEN LIQUID /MILD ODOR. BOILING POINT: 180
DEG CELSIUS. VAPOR PRESSURE: 0.50 MMHG. SOLUBILITY IN WATER: INSOLUBLE.
SPECIFIC GRAVITY: 0.9 (WATER = 1.0). MOLECULAR WEIGHT: PROPRIETARY. PH: 6-
7. FLASH POINT (METHOD): >200F. FOR THE REMOVAL OF H2S IN VARIOUS
APPLICATIONS AND NOT LIMITED TO ZERO FLARING/FLOWBACK, CRUDE OIL
ROAD TRANSPORTATION, DRILLING MUD, REFINING AND PETROCHEMICAL
PLANTS, CRUDE OIL SHIPMENTS AND DISPOSAL WELLS.
1000843350
114
Chemicals
(Drilling Fluids)
HTHP FLUID LOSS SYNTHETIC
POLYMER
ADDITIVE DRILLING FLUID; WHITE POWDER FORM,SYNTHETIC POLYMER,FOR
CONTROLS HTHP FLUID LOSS IN FRESH, SALTY, OR HARD BRINE FLUIDS. IT
INHIBITS SHALE AND STABILIZING FLUID RHEOLOGY. IT CONTROLS WATER LOSS
IN ALL ENVIRONMENTS AND REDUCES DIFFERENTIAL STICKING TENDENCIES.,25
LB MULITIWALL PAPER BAG,APPEARANCE : WHITE COLOURED PO.
1000847072
115
Chemicals
(Drilling Fluids)
SEALING PARTICLES LCM
ADDITIVE DRILLING FLUID; POWDER FORM,SPECIAL BLEND OF GRADED SEALING
PARTICLES.,FOR DESIGNED TO BE EFFECTIVE IN CURING SEVERE TO TOTAL LOSS
CIRCULATION IN HIGHLY FRACTURED/VUGULAR OR POROUS CARBONATE
FORMATIONS, WITHOUT THE ADDITION OF OTHER CONVENTIONAL LCMS IT CAN
BE USED IN ALL TYPES OF DRILLING FLUIDS AND IT IS NOT
RECOMMENDED,SPECIAL BLEND OF GRADED SEALING
PARTICLES.,BAG,APPEARANCE: LIGHT TAN/BROWN SPECIFIC GRAVITY: 0.9
SOLUBILITY IN WATER: INSOLU PH: 6.5-7.5.
1000866812
116
Chemicals
(Drilling Fluids)
HIGH SOLIDS HIGH FLUID LOSS
LCM
ADDITIVE DRILLING FLUID; POWDER FORM,MIXTURE,FOR HIGH FLUID LOSS LCM
FORMS A RAPID SOLID PLUG AGAINST LOSS ZONE WHEN LIQUID PHASE IS
SQUEEZE FROM SLURRY IN ORDER TO CURE PARTIAL TO SEVERE LOSSES OF
WATER/OIL BASED MUDS.,MIXTURE,BAG,APPEARANCE: OFF-WHITE TO GA BULK
DENSITY: 41-46 LB/CU PH: 11.5-12.8.
1000881942

Material Number
9COM/9CAT
117
Chemicals
(Drilling Fluids)
SWELLING SEALING LCM
ADDITIVE DRILLING FLUID; POWDER FORM,MIXTURE OF POLYSACCHARIDES,FOR
SWELLING/SEALING AGENT USED TO FILL FRACTURES AND VOIDS BY CREATING A
SOLID INNER MATRIX SEAL IN ORDER TO CURE PARTIAL TO SEVERE LOSSES OF
WATER/OIL BASED MUDS. USUALLY PUMPED AHEAD OF EZ-SQUEEZE OR CEMENT
JOB AND IT HAS A GOOD SOLUBILITY IN ACID,MIXTURE OF
POLYSACCHARIDES,PAIL,APPEARANCE: LIGHT TAN TO OF BULK DENSITY: 35-55
BA/CU.
1000881943
118
Chemicals
(Drilling Fluids)
DRILZONE - ROP enhancer
ADDITIVE DRILLING FLUID; LIQUID FORM,IVE ND OF SURFACE,FOR SPECIAL BLEND
OF SURFACE AGENTS ROP ENHANCER ,USED IVE IN THE WATER BASE MUD FOR
REDUCING TORQUE AND ,DRAG AND PREVENTING BIT BALLING. NORMAL
TREATMENT:1-2% VOL/VOL. KLA-SHIELD SYSTEM CONSISTS OF DRILZONE IDCAP
D, KLA-STOP AND POROSEAL.,IVE ND OF SURFACE,55 GAL/ DRUM,APPEARANCE:
YELLOW TO BROWN 0.78- FLASH POINT: > 201°F UID SPECIFIC GRAVITY.
1000875822
119
Chemicals
(Drilling Fluids)
KLA-STOP
ADDITIVE DRILLING FLUID; LIQUID FORM,POLYAMINE DERIVATIVE,FOR USED FOR
SUPPRESSING CLAY SWELLING. IT EFFECTIVELY , INHIBITS SHALE OR GUMBO
CLAYS FROM HYDRATING , AND MINIMIZES THE POTENTIAL FOR BIT BALLING.
NORMAL TREATMENT: 1-4% VOL/VOL. KLA-SHIELD SYSTEM CONSISTS OF
DRILZONE , IDCAP D, KLA-STOP AND POROSEAL,POLYAMINE DERIVATIVE,DRUM
55 GAL/ DRUM,PH (5% SOLUTION): 9.2-10. FLASH POINT: > 200°F
EARANCE:COLORLESS LIQUID CIFIC GRAVITY: 1.03-1.0.
1000875823
120
Chemicals
(Drilling Fluids)
IDCAP D
ADDITIVE DRILLING FLUID; POWDER FORM,DRY ACRYLIC ACID COPOLYMER,FOR
ENCAPSULATION COPOLYMER USED TO PROVIDE CUTTINGS , ENCAPSULATION
AND CLAY DISPERSION INHIBITION WITH MINIMAL VISCOSITY CONTRIBUTION
FOR WATER BASE FLUIDS AND SALINE WATER ENVIRONMENTS. NORMAL
TREATMENT: 2-4 LB/BBL. KLA-SHIELD SYSTEM CONSISTS OF DRILZONE,DRY
ACRYLIC ACID COPOLYMER,BAG 25 KG/SACK,APPEARANCE: WHITE POWDER
SPECIFIC GRAVITY: 0.8 PH (1% SOLUTION): 6.
1000875824

Material Number
9COM/9CAT
121
Chemicals
(Drilling Fluids)
POROSEAL
ADDITIVE DRILLING FLUID; LIQUID FORM,STARCH COPOLYMER,FOR PROVIDES
PERMEABILITY PLUGGING TO EFFECTIVELY SEAL SHALES AND FILTER CAKES,
IMPROVING THE PERFORMANCE OF HIGHLY INHIBITIVE WATER-BASE DRILLING
FLUIDS. IT ADDITIVE IS ALSO USED TO PROVIDE SUPPLEMENTAL FLUID LOSS
CONTROL IN HIGH-TEMPERATURE APPLICATIONS NORMAL POROSEAL -SHIELD
SYSTEM CONSISTS DRILZONE IDCAP D, KLA-STOP ATMENT:2-5%
VOL/VOL.,STARCH COPOLYMER,55 GAL/DRUM,APPEARANCE: WHITE LIQUID
SPECIFIC GRAVITY: 1.0-1.1 PH (CONC. SOLUTION): 10.
1000875825
122
Chemicals
(Drilling Fluids)
FIBER FINE
ADMIXTURE DRILLING MUD; SOLID FORM,ORGANIC CELLULOSE FIBER, LIGHT TAN
/ BROWN,FOR USED FOR SEALING THIEF ZONES, HIGHLY FRACTURED/VUGULAR
FORMATIONS AND MINIZING THE RISK OF DIFFERENTIAL STICKING,A FINELY SIZED
(MICRONIZED) ORGANIC CELLULOSE FIBER,25LB.BAG,ODORLESS, SG: 0.9, MIX OF
FINELY DIVIDED CELLULOSE FIBERS, INSOLUBLE IN WATER, NON TOXIC, PH: 6.5-
7.5,SIEVE SPECIFICATION FOR FRAC-SEAL FINE: RETAIN ON 40 MESH SIEVE: 0%,
RETAIN ON 60 MESH SIEVE: 0.10%, RETAIN ON 80 MESH SIEVE: 0.20%, RETAIN ON
100 MESH SIEVE: 2.83%, RETAIN ON 140 MESH SIEVE:11.2%, RETAIN ON 170
MESH SIEVE:28.5%, RETAIN ON 270 MESH SIEVE:38.23%:NORMAL TREATMENT: 8-
10 LB/BBL OF FRACSEAL-FINE , THE CONSTRUCTION OF THE MULTI-WALLED
PAPER BAG (CONTAINER)SHALL BE FOLLOWS: 1ST PLY 75 LB.NATURAL KRAFT
PAPER(INTETIOR PLY) 2ND PLY 75 LB.NATURAL KRAFT PAPER 3RD PLY 80
LB.NATURAL KRAFT PAPER (EXTERIOR PLY). THE BAG DOES NOT HAVE AN INNER
POLYETHYLENE LINER. THE BAG MUST BE VALVE/SPOUT TYPE COMPLETELY
SEALED OTHER ASSOCIATED ELEMENTS MUST NOT BE HARMFUL TO PERSONNEL
AND/OR ADVERSELY AFFECT FLUID PROPERTIES.
1000792802

Material Number
9COM/9CAT
123
Chemicals
(Drilling Fluids)
FIBER MEDIUM
7.5,SIEVE SPECIFICATION FOR FRAC-SEAL MEDIUM: RETAIN ON 40 MESH
SIEVE:1.8%, RETAIN ON 60 MESH SIEVE: 0.30%,RETAIN ON 80 MESH SIEVE:1.7%,
RETAIN ON 100 MESH SIEVE: 4.33%, RETAIN ON 140MESH SIEVE:5.40%, RETAIN
ON 170 MESH SIEVE: 15.97%,RETAIN ON 270 MESH SIEVE:31.17%:NORMAL
TREATMENT: 8-10 LB/BBL OF FRACSEAL-MEDIUM , THE CONSTRUCTION OF THE
MULTI-WALLED PAPER BAG (CONTAINER)SHALL BE FOLLOWS: 1ST PLY 75
LB.NATURAL KRAFT PAPER(INTETIOR PLY) 2ND PLY 75 LB.NATURAL KRAFT PAPER
3RD PLY 80 LB.NATURAL KRAFT PAPER (EXTERIOR PLY). THE BAG DOES NOT HAVE
AN INNER POLYETHYLENE LINER.
1000792803
124
Chemicals
(Drilling Fluids)
FIBER COARSE, 25 LB
7.5,SIEVE SPECIFICATION FOR FRAC-SEAL COARSE: RETAIN ON 40 MESH SIEVE:
4.93%, RETAIN ON 60 MESH SIEVE: 2.17%, RETAIN ON 80 MESH SIEVE: 3.73%,
RETAIN ON 100 MESH SIEVE: 6.17%, RETAIN ON 140 MESH SIEVE:6.87%, RETAIN
ON 170 MESH SIEVE:17.63%, RETAIN ON 270 MESH SIEVE:30.47%:NORMAL
TREATMENT: 8-10 LB/BBL OF FRACSEAL-COARSE, THE CONSTRUCTION OF THE
MULTI-WALLED PAPER BAG (CONTAINER)SHALL BE FOLLOWS,1ST PLY 75
LB.NATURAL KRAFT PAPER(INTETIOR PLY)2ND PLY 75 LB.NATURAL KRAFT PAPER
3RD PLY 80 LB.NATURAL KRAFT PAPER (EXTERIOR PLY).THE BAG DOES NOT HAVE
AN INNER POLYETHYLENE LINER.THE BAG MUST BE VALVE/SPOUT TYPE
COMPLETELY SEALED OTHER ASSOCIATED LEMENTS MUST NOT BE HARMFUL TO
PERSONNEL AND/OR ADVERSELY AFFECT FLUID PROPERTIES.
1000792804

Material Number
9COM/9CAT
125
Chemicals
(Drilling Fluids)
BARABRINE Defoam
ADDITIVE DRILLING FLUID; LIQUID FORM,BLEND OF NONIONIC
SURFACTANTS,FOR NON-DAMAGING FLUIDS RDF-615 AND NON-RESERVOIR
WBM AND BRINES, INCLUDING ZNBR2,BLEND OF NONIONIC SURFACTANTS,PAIL
(ONE PAIL = 5 GALLONS),APPEARANCE: COLORLESS CLEAR LI,ADDITIVE FOR FLUID
FORMULATION FOR SYSTEM RDF-615. THIS DEFOAMER IS USED AS PART OF THE
NON-DAMAGING FLUIDS RDF-615, WHICH INCLUDES BARAZAN D PLUS, BARA
CARB 150, OXYGON, BARABUF (MM: 1000184370), N DRILL HT PLUS (MM:
1000788390), BARACARB 5 (MM: 1000775558), BARACARB 25 (MM:
1000775559), BARACARB 50 (MM:1000775560) AND BAROLUBEGOLD SEAL (MM:
1000757580). TYPICAL TREATMENT IS 0.05-0.25 LB/BBL (0.007-0.033 GAL/BBL).
THIS DEFOAMER CAN ALSO BE USED IN NON-RESERVOIR WATER BASED MUDS
AND BRINES, INCLUDING ZNBR2. SUPPLIER/VENDOR IS REQUIRED TO SUBMIT LAB
CERTIFICATE OF ANALYSIS (COA) AND CERTIFICATE OF ORIGIN (COO).
1000908534
126
Chemicals
(Drilling Fluids)
PUREFIED XANTHAN GUM
ADDITIVE DRILLING FLUID; POWDER FORM,VISCOSIFIER / SUSPENSION AGENT
(POLYSACCHARIDE),FOR FRESH WATER, SEA WATER AND BRINE,DISPERSANT-
ADDED BIOPOLYMER (XANTHAN GUM),BAG (ONE BAG =55 LBS),APPEARANCE:
YELLOW TO WHITE PO,ADDITIVE FOR FLUIDFORMULATION FOR SYSTEM RDF-615.
IT IS A BIOPOLYMER XANTHAN GUM USED TO HELP TO DISPERSE EASILY, AND TO
PROVIDE VISCOSITY AND SUSPENSION IN FRESH WATER, SEA WATER AND IN
BRINES, AS SODIUM AND POTASSIUM BROMIDES AND SODIUM AND POTASSIUM
CHLORIDES. IT IS STABLE AT 250 DEG F (121 DEG C). TYPICAL TREATMENT OF 0.1-
2 LB/BBL (0.3-5.7 KG/ CUBIC M) AS NEEDED TO OBTAIN THE DESIRED VISCOSITY.
THE UNIT IS 55 LBS (25 KG)/BAG. IT IS PART OF A NON-DAMAGING SYSTEM RDF-
615, WHICH CONTAINS BARABRINE DEFOAM, BARA CARB 150, OXYGON,
BARABUF (MM: 1000184370), N DRILL HT PLUS (MM: 1000788390), BARACARB 5
(MM: 1000775558), BARACARB 25 (MM:1000775559), BARACARB 50 (MM:
1000775560) AND BAROLUBE GOLD SEAL (MM: 1000757580).
1000908458

Material Number
9COM/9CAT
127
Chemicals
(Drilling Fluids)
Ground Marble CaCO3, 50-150,
55 LB
ADDITIVE DRILLING FLUID; POWDER OR GRANULES FORM,SIZED CALCIUM
CARBONATE (CACO3) MARBLE QUALITY,FOR WATER BASED MUD (WBM), OIL
BASED MUD (OBM) AND BRINE,CALCIUM CARBONATE (CACO3) MARBLE
QUALITY.,BAG (ONE BAG = 55 LBS),APPEARANCE: WHITE POWDER OR
GR,ADDITIVE FOR FLUID FORMULATION FOR SYSTEM RDF-615. SIZED MARBLE
CALCIUM CARBONATE (D50 = 150 MICRONS) USED TO INCREASE DENSITY IN
WBM AND OBM FOR RESERVOIR APPLICATIONS AND BRINES AND AS A BRIDGING
AGENT FOR FLUID LOSS CONTROL AND SEALING/LCM IN NON - DAMAGING
SYSTEMS. THE UNIT IS 55 LBS (25 KG) / BAG. IT IS PART OF THE RDF -615 WHICH
CONTAINS BARABRINE DEFOAM, BARAZAN D PLUS, OXYGON, BARABUF (MM:
1000184370), N DRILL HT PLUS (MM:1000788390), BARACARB5 (MM:
1000775558), BARACARB 25 (MM:1000775559), BARACARB 50 (MM:
1000775560) AND BAROLUBE GOLD SEAL (MM: 1000757580).
1000908535
128
Chemicals
(Drilling Fluids)
Oxygon
ADDITIVE DRILLING FLUID; POWDER FORM,ORGANIC ACID SALT (OXYGEN
SCAVENGER),FOR FRESH WATER, WATER BASED MUD (WBM) AND MONO OR
DIVALENT BRINES,GRANULAR ERYTHORBATE MATERIAL,PAIL (ONE PAIL =55
LBS),APPEARANCE: WHITE GRANULAR POW,ADDITIVE FOR FLUID FORMULATION
FOR SYSTEM RDF-615. IT IS USED AS A CORROSION INHIBITOR OR OXYGEN
SCAVENGER IN WBM, WATER AND IN MONO OR DIVALENT BRINES/COMPLETION
FLUIDS. THE UNIT IS 55 LBS (25KG)/PAIL. IT IS PART OF THE NON-DAMAGING
SYSTEM - RDF -615 SYSTEM WHICH CONTAINS BARABRINE DEFOAM, BARAZAN D
PLUS, BARA CARB 150, BARABUF (MM: 1000184370), N DRILL HT PLUS
(MM:1000788390), BARACARB 5 (MM: 1000775558), BARACARB 25
(MM:1000775559), BARACARB 50 (MM: 1000775560) AND BAROLUBE GOLD SEAL
(MM: 1000757580). TYPICAL TREATMENT OF 0.1 LB/BBL. BASE THE TREATMENT
OF CIRCULATING FLUIDS ON OXYGEN CONTENT.
1000908459
129
Chemicals
(Drilling Fluids)
MAGNESIUM OXIDE
CHEMICAL; GR TECHNICAL,M20,POWDER FORM,22.7 KG (50 LB) - 25.0 KG (55 LB)
SACK,96% MG0 MIN,MAGNESIUM OXIDE,SHIPMENT OF PRODUCT SHALL
CONFORM TO SAUDI ARAMCO EXPORT PACKING MANUAL THE PRODUCT
SHOULD BE PACKED IN 3 OR 4 PLY PAPER SACKS
1000184370

Material Number
9COM/9CAT
130
Chemicals
(Drilling Fluids)
LUBRICANT - RADIAGREEN EME
SALT
ADDITIVE DRILLING FLUID; SPECIAL BLEND,FOR 5 MAX C DEG (320 F) MAX AND
PH USED TO REDUCE TORQUE AND DRAG IN VERY CHALLENGING DRILLING AND
COMPLETION OPERATIONS E.G. SPECIAL COILED TUBING UNDER BALANCED
DRILLING. THE PRODUCT SHOULD BE COMPATIBLE FOR APPLICATION IN
SEAWATER AND SALT BRINE-BASED DRILLING FLUIDS AND BRINES. IENT
CONDITIONS TOM HOLE LIMITATIONS: NHOLE CONDITIONS OR ING
APPLICATIONS UNDER ASING IN DRUM OR CHEESING E PHASE SEPARATION
PROBLEMS ALKALINE DRILLING FLUIDS PRODUCT SHOULD BE EASY PRODUCT
SHOULD NOT FORM HANDLE, EASY TO FLOW AT,SPECIAL
BLEND,DRUM,APPEARANCE: AMBER LIQUID SPECIFIC GRAVITY: 0.98-1.1
SOLUBILITY IN WATER: INSOLU FLASH POINT (METHOD): 185 POUR POINT: 32 C
DEG MAX.
1000857139
131
Chemicals
(Drilling Fluids)
POLYANIONIC CELLULOSE LO-VIS
(PAC-LV)
ADMIXTURE DRILLING MUD; AA SOLID, GRANULAR, WHITE TO FORM,MIL-PAC LV,
POLYANIONIC ODORLESS, POLYANIONIC,FOR AA USED FOR FILTRATION
CONTROL,AA POLYANIONIC CELLULOSE,50 LB OR 25 KG / SACK,AA APPEARANCE:
SOLID, CREAM,OTHER ASSOCIATED ELEMENTS BULID-UP. CONTAINER IS A MULTI-
WALLED SACK, 1ST PLY - 70 G/SQM NATURAL KRAFT PAPER (INTERIOR PLY). 2ND
PLY - 70 G/SQM NATURAL KRAFT PAPER. 3RD PLY - SEPARATE INNER BAG LINER,
HIGH DENSITY ORIENTED AND CROSS LAMINATED INNER LINER (TUBULAR SHAPE)
MADE UP OF POLYETHYLENE RESIN MATERIAL WITH A WEIGHT RANGE OF 15-24
G/SQM. 4TH PLY - 70 G/SQM NATURAL KRAFT PAPER. 5TH PLY - SEPARATE INNER
BAG LINER, HIGH LAMINATED INNER LINER (TUBULAR SHAPE)MADE UP OF
POLYETHYLENE RESIN MATERIAL MATERIAL WITH A WEIGHT RANGE OF 15-24
G/SQM. 6TH PLY - 70 G/SQM NATURAL KRAFT PAPER (EXTERIOR PLY). THE BAG
MUST BE PROPERLY CONTAINER BE VALVE / SPOUT TYPE COMPLETELY SEALED
AND MOISTURE PROOF.
1000758662

Aramco approved vendor list 2015

Aramco approved vendor list 2015

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Similar to Aramco approved vendor list 2015

Similar to Aramco approved vendor list 2015 (20)

Recently uploaded

Recently uploaded (20)

Aramco approved vendor list 2015