Controllers for domestic suction hoods.

1. CONTROLLERS FOR DOMESTIC
SUCTION HOODS

2. Thanks to the experience gained in suction and air treatment, Fasar Elettroni-
ca offers a full range of electronic control systems, rigorously Made in Italy, intended
for the management of domestic suction hoods and designed to satisfy costumers
needs careful about the effectiveness, performances, ergonomics and design.
The products line for the domestic suction consists of technologically advanced de-
vices that allow to control all the functions of a kitchen hood in a optimally way, with
the possibility to realize the essential air exchange to neutralize the fumes, herbs
and vapors arising from the ordinary preparing and cooking food operations.
Simple to control, through different types of interface that exploit mechanical or ca-
pacitive keys, the proposed systems also provide to alert the user in case it is ne-
cessary to clean or eventually the filters replacement, so that the suction hood al-
ways operates with the maximum efficiency in terms of performance and energy
consumption, to ensure an healthy, safe and comfortable kitchen environ-
ment.
CONTROLLERS FOR DOMESTIC SUCTION HOODS

3. ELECTRONIC CONTROL SYSTEM WITH MECHANICAL
KEYBOARD p/n FE1009
The FE1009 electronic system is an extremely practical functio-
nal and economic solution for the management and the control
of a domestic suction hood. The power board, housed inside a
plastic box, allows to drive a 4 speeds common wire motor and
the hood’s lights; the user interface consists of an assem-
bled keyboard inside a plastic box, that provide 6 mechanical
keys and 4 leds to allow the user to activate the different
implemented functions and receive informations about the
hood’s operation.
Possibility to manage microswitch or temperature sensors and
optional humidity, firmware customization on customer request:
the FE1009 electronic control system offers the maximum flexibility to satisfy any requirement.
ELECTRONIC CONTROL SYSTEM WITH CAPACITIVE
KEYBOARD p/n FEGR030
FEGR030 is a sophisticated control system for domestic
hoods that associates, to the power board, an user interface
with capacitive commands, consists of 6 backlit keys and a 7-
segment display, for the management of the suction motor
and hood’s lights. To facilitate the entire kit integration inside
the suction hood, power board and user interface are both as-
sembled inside a suitable plastic container. With a few simple
steps, the FEGR030 electronic system allows to control the
suction motor and the lighting system, the access to the
deferred turn off function of the hoods and the alarm reset that
reports filter saturation. FEGR030 provide to the kitchen tech-
nology and elegance, maintaining the highest levels the suction hood’s usability.
ELECTRONIC CONTROL SYSTEM WITH CAPACITIVE
KEYBOARD p/n FEGR031
Intended for the management of domestic suction installations,
the FEGR031 electronic control system consists of a power
board, capable of driving a 4 speeds common wire motor and the
hood’s lighting system, and an user interface board charac-
terized by a 6 backlit capacitive keys.
The keyboard can be fixed on glass or Plexiglas supports of diffe-
rent thicknesses: is possible to require an appropriate firmware
customization to adapt the touch system sensibility to the specific
support’s used thickness.
Perfectly integrating into the kitchen environment, FEGR031 al-
lows the user to access in an easy and intuitive way to the different implemented functions and al-
ways ensure, thanks to its efficiency, an optimal air quality level.

4. FE1009 FEGR030 FEGR031
Supply
Single-phase
220-240Vac -50Hz
Single-phase
220-240Vac -50Hz
Single-phase
220-240Vac -50Hz
MAX MOTOR load 400 W 400 W 400 W
MAX LIGHTS load 400 W 400 W 400 W
Motor type
Common wire 4
speeds
Common wire 4
speeds
Common wire 4
speeds
Motor control through relay
7 A max.
(resistive load)
7 A max.
(resistive load)
7 A max.
(resistive load)
Lights control through relay
7 A max.
(resistive load)
7 A max.
(resistive load)
7 A max.
(resistive load)
User interface and visual
signals
Keyboard with 6 keys
and 4 leds
Keyboard with 6
capacitive backlit keys
and 7 segments
display
Keyboard with 6
capacitive backlit keys
Microcontroller electronic
control system
Yes Yes Yes
Plastic box for power board Provided Provided Provided
Plastic box for keyboard Provided Provided No
Flat cable 10 pole with
sheath
Yes Yes Yes
On request it is possible to provide custom lengths wiring for power
supply and loads.
TECHNICAL FEATURES

5. ELECTRONIC CONTROL SYSTEM FOR
DOWNDRAFT HOODS WITH CAPACITIVE KEYBOARD
p/n FE1006
Completely hidden within the cooking table when it is not in ope-
ration, the Downdraft hood is provided with a mechanism which
allows the handling, and therefore the opening, at the time when
is required the use: in the same way the hood back to hide from
view when it played its function.
The FE1006 electronic control system was conceived and deve-
loped by Fasar Elettronica to allow the management of domestic
hoods that integrate this peculiar functionality: the base board,
then, in addition to managing the suction motor and the hood’s
lighting system, also controls a gearmotor for the handling
of the suction system. Through a capacitive keyboard, with
5 commands touch, 6 signal leds and a seven-segment di-
splay, the user can control lights and motor, including the
hood’s handling.
Technology with strong aesthetic impact: FE1006 helps to give elegance to the suction hood, exal-
ting its efficiency and functionality.
ELECTRONIC CONTROL SYSTEM FOR DOWDRAFT HOODS
WITH CAPACITIVE KEYBOARD
p/n FE1007
Downdraft suction hoods, installed on a work surface at a suita-
ble distance from the cooking table, allow to have more space in
the kitchen and give to the environment a simple and elegant
aspect: the Downdraft hoods open when is necessary to suck up
and close , disappearing in the work plan, when they turned off.
Fasar Elettronica offers the FE1007 electronic control system for
the management of this sophisticated type of suction systems:
an user interface, consisting of 6 capacitive backlit keys and se-
ven-segment display, allows to manage with a simple touch
of fingers all the suction hood’s functionality, including the
opening and closing commands.
High performance and maximum safety in the management of
the handling mechanism, easy of use and strong aesthetic im-
pact thanks to the touch commands: FE1007 control system is
the ideal solution for combining style and efficiency.

6. FE1006 FE1007
Supply
Single-phase
220-240Vac -50/60Hz
Single-phase
220-240Vac -50/60Hz
MAX MOTOR load 400W 400W
Motor type
Common wire 4
speeds
Common wire 4
speeds
Lights control through LED
13W 12V constant
voltage MAX 1,08A
13W 12V constant
voltage MAX 1,08A
Gearmotor control for
handling
24V gearmotor,
threshold overload
protection 4A
24V gearmotor,
threshold overload
protection 4A
Microswitch management of
end stroke
No.3: high, low and for se-
curity
No.3: high, low and for se-
curity
User interface and visual
signals
Keyboard with 5 capacitive
backlit keys and 7
segments display
Keyboard with 5 capacitive
backlit keys and 7
segments display
Microcontroller electronic
control system
Yes Yes
Radio control with 4 keys
management (not provided)
Yes Yes
On request is possible to provide custom lengths wiring for the driving of
supply and loads.
TECHNICAL FEATURES

7. Rev. 04 del 27/07/2015

8. FASAR ELETTRONICA S.r.L.
VIA CORVI 96,
60019 SENIGALLIA (AN)
TEL: 071.6609805
FAX: 071.6611573
www.fasar.it - www.fasarelettronica.com
commerciale@fasar.it - export@fasar.it