Control structures provide programming languages with the ability to alter the sequential execution of code. The key control structures are sequential execution, selection (if/else), repetition (loops), and unconditional branching (goto). Selection statements allow a program to choose which instructions to execute based on conditions, while repetition statements allow code to execute repeatedly. Early languages like FORTRAN had limited control structures, while ALGOL introduced more robust structures like blocks and flexible for loops. Modern languages continue to refine control structures for readability and reliability.
social pharmacy d-pharm 1st year by Pragati K. Mahajan
Master Control Structures in 40 Characters
1. Control Structures
• Programs have 4 basic control structures:
– Sequential
– Selection
– Repetition
– Unconditional Branching
• we can break unconditional branches into those that pass parameters
(function calls) and those that do not, and whether they return to the
current location (function calls) or not (GO TO types)
• For purposes of local scope and easier syntax, we can
add blocks or compound statements
– ALGOL 60 - first language to introduce blocks using begin-
end statements (also used in Pascal, Ada, Modula, etc)
– C, C++, Java, PHP, JavaScript, Perl - uses { } as delimiters
– Lisp uses ( )
• Control statements are essential for any programming
language
2. Selection Statements
• Gives a program the ability to choose which
instruction(s) to next execute based on conditions
• Types:
– 1-Way selection (if statement)
– 2-Way selection (if-else statement)
– 3-Way selection (FORTRAN had a peculiar arithmetic-
based selection statement)
– multiple selection (or n-way selection, switch/case)
• Design issues:
– what is the form and type of expression that controls the
selection? (C allows 0/non-0, Java/C# allow only boolean)
– how are clauses specified if at all?
– if nesting is allowed, how is it specified and implemented?
3. One-way and Two-way Selections
• One-way: if without else
– if condition is true then execute next statement, otherwise skip over it
• FORTRAN’s IF statement was a One-Way (no Else clause, no nesting)
• if the then clause has more than 1, instruction, we alter the semantics of the
statement, to what is in essence an “else-goto” rather than, an “if-then”
• nearly every language since has allowed two-way selections
• ALGOL 60 introduced the first true two-way selection
– terms “then-clause” & “else-clause” introduced
– clauses are expected to be a single instruction to easily detect the end of each
clause, otherwise, must use blocks
– ALGOL 60 allowed more than one entry into the two-way selection clauses!
– in languages where the “then” is omitted, the condition must be placed in ( )
to denote its end
If (.NOT. Condition) GOTO 20
I = 1
J = 2
20 Continue
4. Blocks
• ALGOL introduced the block structure in part to permit
multiple instructions being part of the then or else
clauses
– these required delimiters – begin .. end, { }, ( )
• in Algol 60:
• If (Boolean expression) then
begin
statement 1;
...
statement n
end;
– Perl goes one step further and requires that all clauses be
placed into blocks (even if the clause is a single instruction)
– Ada and FORTRAN 95 have explicit end of blocks but not
explicit beginnings by using end if or end for statements
5. Nesting
• Nested If-Then-Else statements can lead to ambiguity if there
is a miss-match between conditions and else clauses
• In ALGOL 60, nested if-then-else clauses must use
an explicit end statement
• this is also the case for FORTRAN 77/90/95, Modula-2
and Ada
• In Ruby, all clauses must have explicit end
statements (even if there is only a single
statement in the clause)
• In C/C++/Java/C# and Pascal, the compiler rule
matches mismatched elses with the last unmatched
condition
– the rule can be overridden using blocks
if(sum = = 0)
if (count = = 0)
result = 0;
else result = 1;
Which condition does the else go with?
Is result = 1 if sum != 0 or if sum = = 0 and count != 0?
if sum = = 0 then
if count = = 0 then
result = 0
else
result = 1
end
end
if sum = = 0 then
if count = = 0 then
result = 0
end
else
result = 1
end
6. Multiple Selection Constructs
• FORTRAN offers a 3-way selection
– IF (expression) N1, N2, N3
• if expression < 0 then goto N1, if = 0 goto N2, if > 0 goto N3
– this was FORTRAN I-IVs only IF statement!
• ALGOL-W introduced the case statement
– Pascal, Modula and Ada, FORTRAN 90/95 all use this
– C/C++/Java/C# use the switch statement
• the main difference is that after a condition is found true in the switch
statement, the next condition is tested such that the switch statement is
not exited until all cases have been tested, to avoid this, you must use
break statements
• however, to fix this oddity, in C# you must end each case with a break
or goto
– Lisp uses the COND statement
– all of these allow for a default if none of the cases is selected
• default in C-languages, else in Pascal, when others in Ada
• Perl/Python don’t have a multi-selection statement at all!
7. Nested If-Else Constructs
• Cond in Lisp is really a nested if-then-else function
– Lisp also provides a “default” by using T as the final condition
• Other languages have provided a specific if-then-else nested
construct for convenience
– Ada uses elsif if the intention is to do “else if” so that you do not have to
explicitly end each if statement with an end if
– Python uses elif so that you don’t have to continue to indent
Ada without elsif:
if Count < 10 then
Bag1 := True;
else
if Count < 100 then
Bag2 := True;
else
if Count < 1000 then
Bag3 := True;
end if;
end if;
end if;
Ada with elsif:
if Count < 10 then Bag1 := True;
elsif Count < 100 then Bag2 := True;
elsif Count < 1000 then Bag3 := True;
end if;
8. Repetition Statements
• Every language has included some form of repetition,
either counter-controlled (early FORTRAN) or
logically-controlled, or both
• Issues:
– how is repetition controlled?
– is testing before or after the loop body? (pre vs. post test)
– where should the control mechanism appear in the loop?
– for counter-controlled loops
• what are legal types and the scope of the loop control variable?
• what happens to the variable when the loop terminates?
• can the loop’s controlling variables (terminating value, step-size) be
altered during execution?
• are the loop controlling variables (terminating value, step-size)
evaluated once (before executing the loop) or after each iteration?
• what are legal step-sizes (for counter-controlled loops)
9. FORTRAN’s DO statement
• DO label variable = initial, terminal [,step]
– example: Do 10 K = 1, 10
– FORTRAN I – IV: a posttest loop, stepsize defaults to 1
– label is a line number that indicates the last instruction in the loop body
– FORTRAN 77, 90 and 95: pretest loop
• Integers (literals or variables) only for initial, terminal, step
– these values are computed prior to loop execution so that, if a variable
changes values in the loop, it does not affect the number of loop iterations
DO 10 I = J, K * 10, L
K = K + 1
L = L + 2
10 CONTINUE
If J = 1, K = 5, L = 2, the loop would
iterate 25 times in spite of K and L
changing in the loop body
initvalue = J
terminalvalue = K * 10
stepvalue = L
iterationcount =
max(int((K*10 – J) / L), 1*)
* - in FORTRAN I-IV, this is a post-test
loop so it must iterate at least 1 time, in
later FORTRANs, this would become 0
10. ALGOL For Loop
• ALGOL 60 introduced an extremely flexible for loop as
a reaction to FORTRAN’s primitive and restrictive Do
– the programmer controls the number of iterations by
• a counter controlled mechanism like FORTRAN’s DO but where the
step size and terminating value could change during iterations
• enumerating a list of values to iterate through
• using a logical statement to control termination
• or any combination thereof
• Basic form:
– for <var> := <list>{,<list>} | <list> <expr> | <expr> while
<boolean> | <expr> step <expr> until <expr> do <stmt>
– examples:
• for count :=1, 2, 3, 4, 5, 6, 7 do list[count]:=0
• for count:= 1 step 1 until 7 do list[count]:=0
• for count:=1, count+1 while (count <=7) do list[count]:=0
• for I := 1, 4, 13, step 5 until 23, 3*I while I < 300, 8, -4 do …
– the values for I iterate through: 1, 4, 13, 18, 23, 69, 207, 8, -4
11. Other Languages For Loops
• COBOL:
– Perform <expr> Times <statements> End-Perform
– Perform Varying <var> From <expr> By <expr> Until <expr>
<statements> End-Perform
• PL/I:
– DO <var> = <start> TO <stop> {BY <stepsize>}; <statements> END;
– <start>, <stop> and <stepsize> can be int or float values
– like FORTRAN though, the values are only evaluated once before the
loop starts
– can have multiple lists of <start> TO <stop> values
• DO I = 1 TO 10, 20 to 30, 50 TO 100; …
• Pascal: for <var> := <init> (to | downto) <final> do
– <var>, <init>, <final> are any ordinal type but are evaluated prior to the
start of the loop, step size is fixed as 1 or -1 depending on whether you use
to or downto
• Ada: for <var> in [reverse] <range> loop ... end loop
– <range> is a subrange as in 1..10 (the values can be ints or enumerated
types)
12. Continued
• Common Lisp: (do ((<var> <init> <step>) (<endtest> {.
<result>})) <statements>)
– <init>, <step>, <endtest> and <result> can all be functions or atoms,
<result> if specified is returned when the loop exits rather than the value
returned by the last <statements> and <var>’s scope is only for the loop
itself
• C’s for loop
– for (expr1; expr2; expr3) statement
• expr1 is the initialization, expr2 is the test, expr3 is the step increment
– each of these can be multiple terms separated by commas as in
• for (c1=0,c2=1; c1<=10 && c2<=100; c1++, c2*=2)
– notice a C for-loop does not need a loop body as actions can take place in
the expr3 component, or can omit one or more clauses, and can also be
used like a logical loop
• for(x=1; x<=n; x++, factorial *= x);
• for(temp = head; temp != NULL; temp = temp->next) {…}
– unlike the previous languages (except for Algol and Common Lisp), the
increment and terminating conditions can change making these loops more
writable but less readable
13. Iterator Loops
• A variation of the counting loop is a loop that iterates
once for each item in the list (or data structure) provided
– Algol’s for loop has the capability of iterating over a list, but
the list must be explicitly enumerated
– Python: for <var> in <range>:
• <range> will be a tuple or range(value [, value] [, value])
• note that Python’s for loop can also be a counting loop by using the
range function as in for x in range(0, 10, 2) which iterates over 0, 2, 4,
6, 8, 10
– C# has a foreach statement which can iterate across array
elements
– Java 5.0’s for loop has been enhanced to work on objects of
type Iterable
– Common Lisp has a dolist statement much like C#’s foreach
14. Logically Controlled Loops
• For situations where the number of repetitions is not
based on counting, we use logically controlled loops
• Issues
– pretest vs. posttest (test condition before entry or after
execution?)
• pre-test can block entry to loop body
• post-test must execute body at least once
• in C, C++ and Java, the post-test loop has the same semantics as the
pre-test loop: repeat while the condition is true
• in Pascal, the semantics change: repeat until condition becomes false
– is this type of statement separate from a special kind of
counter-controlled loop?
• C/C++/Java/C#, Pascal, Modula-2 have both pretest and posttest loops
• Ada only has posttest
• FORTRAN has no logically controlled loop (even FORTRAN 95)
15. Exiting Loops
• Should exiting a loop only be permitted at the end when the test
returns false, or can premature exiting (and returning) be
permitted?
– Ada has a conditional-less loop (infinite loop)
• loop ... end loop
– to use this, it requires that a GOTO statement be used to break out of the loop, for
instance in an if statement
– C/C++/Java/C# and Modula-2 have unconditional exit statements
• break, continue, exit
– these are forms of GO TO statements
• Java has break and exit but not continue
– COBOL uses
• Perform <paragraph> Thru <paragraph>
– both paragraphs are executed but if an error arises in the first paragraph, control
exits to the second paragraph
• Multiple exits harm readability
– exception throwing (and catching) are forms of pre-maturely exiting a
block (including possibly inside a loop)
• again, these are forms of GO TO statements
16. Problems with Unconditional Branching
• Can make programs unreadable
• Creates problems with maintenance
– thus harming reliability, especially of very large programs
• The GO TO statement is too primitive
– “it is an invitation to make a mess of one’s program”
• Most languages have some form of GOTO statement
– Modula-2, Bliss, CLU, Euclid, Gypsy do not!
– Java has a GOTO, but it hasn’t been implemented (yet)
• Without a GOTO, the language must have other control
mechanisms, usually in the form of loops and subprograms with
their own ability to enter and exit
– if you think about it, GOTO statements are required in
assembly/machine code because they do not have the high-level
language constructs, but the high level languages should offer these
constructs and let the compiler do the work
17. GOTO Labels
• Used in ALGOL 60, C, FORTRAN and Ada as
locations for GOTO commands
– in Ada, <<label>>
– in FORTRAN and Pascal, unsigned integer constant (20, 100,
etc...)
• in Pascal, labels must be declared as if they were variables (but cannot
be modified or passed as a parameter)
– in C, ALGOL 60, any legal identifier
• Most languages restrict the use of unconditional
branches with respect to which label can be reached
– in Pascal, the scope of the label is the same as the scope of a
variable and the target of the GOTO must be
• within the control statement that includes the GOTO or
• a statement in the same group that contains the GOTO or
• in a statement in an enclosing subprogram scope