Ovwigho Iroresiri Abraham is an electrical engineer seeking challenging assignments. He has over 15 years of experience in electrical engineering for oil and gas projects including feed and detail design, construction support, and commissioning. He is proficient in AutoCAD and has expertise in areas such as project management, procurement, and technical support. Abraham holds a B.Eng in Electrical and Electronics Engineering and is a registered engineer in Nigeria.
1. Ovwigho Iroresiri Abraham
# 22, Fedison Road, Sapele,
Delta State, Nigeria.
Email: abrahamovwigho@gmail.com, ab4live@yahoo.com, Mobile No. +2348038126508, +2348098205259
Seeking Challenging Assignments in….
Electrical Engineering
Career Snapshot
• A competent professional with proven experience in Feed & Detail designing, electrical engineering activities from
conceptual to commissioning for asphalt production plants, brown and green field onshore/offshore Oil and Gas
projects, Flow stations, Independent Power Plants, production facilities/plant, gas gathering etc.
• Expert in generating conceptual and FEED design deliverables for electrical systems, Technical bid evaluation, Vendor
clarification/relation, supervision of construction activities, Material-Take-Off sheet development for procurement and
construction,
• Experienced in handling SCADA system, design reviews and constructability reviews. Good knowledge of
engineering practices, principles, international codes and standards and requisitions.
• Good knowledge of Instrumentation and calibration of control systems
• Applying high level maintenance culture and principles to daily oil and gas activities
• Ability to analyze situations, identify requirements and provide solutions using analytical and quantitative approach.
• Ability to obtain data from site/plant for system modifications, trouble shooting and decision making.
• Ability to apply process controls methods to electrical and mechanical equipment
• Good knowledge of equipment and system interaction.
• Possesses excellent analytical, organizational and problem solving skills, a team leader. Highly motivated to take on
additional training to increase the scope value and application of current knowledge.
• Good knowledge of AUTOCAD deliverables in Instrumentation and Piping drawings (P&ID’s), Process drawing,
Tank farms, Building drawings, Shop drawings (steel work) 3D modeling
AREAS OF EXPERTISE
• Preparation of Feed & Detail Engineering
Deliverables for Electrical Maintenance
• AUTOCAD deliverables in Instrumentation,
Piping drawings, Process drawings, Tank farms
and 3D modeling.
• Evaluation of Vendors and Technical Bid
• Development of engineering documents
• Construction Support
• Installations of Electrical Equipment
• Good knowledge of Electrical Drawings
• SCADA, Analysis and connection
• Project Management
• HSE regulations Compliance
• Technical Support
• Trouble shooting
• Procurement support
• Training & Mentoring
• Callibration
2. PROFESSIONAL EXPERIENCE
Snr. Electrical Engineer (Rotating & Package) Nov 2007 – 2015
Name of Company: Setraco Engineering Construction Company, Ughelli, Nigeria;
Projects – East-West 1&2, Trans-Warri and Bomadi Roads etc.
Key Responsibilities
• Preparation of electrical deliverables like supply specification, data sheet, IDS, Requisition package, drawings,
SDRL, and calculations for electrical cable-size specification for equipment like, Compressors, Instrument air
package etc.
• Participate in extensive engineering design and modification.
• Review of Vendor document/drawings
• Ensures highest levels of quality and safety is adheres to in executing electrical & mechanical works/activities
in accordance with approved local and international standards
• Attend clarification meetings with client
• Preparation of proposals (for Rotating and Package discipline) Carry out studies and FEED engineering
• Installations and Control of AC and DC Motors.
• Maintenance of DC machines (Brush type) cutting, filling, drilling, e.t.c.
• Installation of all kinds of Electrical fittings.
• Wiring (Surface and Conduit systems)
• Installations /Maintenance of Generator (Plant) of all KVAs.
• Weigh Bridge Installation, Maintenance And Operation.
• Load Cells Calibration And Installations
• Installation and Repairs of Heat Transformer Unit Control (Burner) for heating Bitumen.
• Installations of Solenoid valves of various voltage capacities
• Installation of Magnetic proximity switches (sensor) of various voltage capacities.
• Installation and calibration of Cylinders of various sizes.
• Installation of Photo cells.
• Control room, monitoring and operating the plant to achieve good quality of Asphalt. Interfacing with
concerned field personnel to facilitate collection of relevant data and other technical documents required to
prepare detail deliverables
• Preparation of specification, data sheets, requisitions and for the above mentioned rotating and Package
equipment
• Prepared recommendations on equipment location study report.
• Participates in design review meetings, raise and respond to project technical queries
• Preparation of tabulation sheet for Evaluation of vendor un-priced technical proposals ensuring compliance
with purchase order and also recommending viable vendor for supply.
• Provide assistance in the development of fit-for purpose engineering solutions for mechanical equipment
• Follow-up of equipment construction and related pre-commissioning activities in accordance to project
objectives
• Carried out check of equipment on arrival at site/workshop for compliance to project requirements
• Provided assistance to procurement and Installation of equipment after design
• Provision of inter-discipline support during the design stage.
• Involved in project management meetings for detailed Engineering for the different projects.
• Review and approve engineering contractors/vendor’s documents to ensure completeness, quality of work
and adherence to approved standards and Company requirements.
• A good team leader role with contractors without disrespecting contractual terms and conditions
3. • Assign duties as required to project team members
• Participated in the preparation of cost estimates/ input to procurement
• SCADA system analysis, connection and operation
• Liaise with equipment vendors and also prepare requisition package
• Review of vessel lay out drawings submitted by vendors.
• Carried out in-house training to junior and trainee electrical engineers
• Confirmed electrical load list with mechanical equipment
• Adhered to company HSE & QC regulations, procedures and objectives
• Lead, supervised and guide Electrical Engineering team in the preparation and coordination of basic/detail
design.
• Preparation of Long Lead Items list and Requisition package
• Prepared regular activity / progress reports for the projects mentioned above
• Preparation of Purchase Order Specifications
• Participates in design review meetings, raise and respond to project technical queries
NYSC Corps member (Trainee Engineer) – Nigerian Television Authority 2006-2007
Kontagora, Niger State
Key Responsibilities
• Operation and Maintenance of transmitter (NEC PCN123AH Series 10KW and Rohde and Schwarz 5KW BD 111
NM505 VHF.
• Operation and Maintenance of studio equipment sound craft spirit
• Folio mixer and giving technical support in studio recording and broadcasting.
• Engineering drawing of electrical / electronic parts
• Assist in electrical wiring work in workshop
Industrial Training (Rotating) Aug. 2003 – Mar.
2004
Shell Petroleum Development Company (SPDC)
Warri, Delta State.
Key Responsibilities
• Measurement / Monitoring of level pressure and temperature of liquid
• Maintenance of gauges (level, pressure and temperature gauges).
• Maintenance / operation of control valves e.g. needle valves, block valves and manumatic valves.
• Measuring and ensuring that earthing system is effective within specified values and re-enforce if the system
is not effective.
• General electrical gadget maintenance –electrical panels, switchgear and fittings.
Selection of most optimized rotating equipment according to project requirements
• Providing assistance to Inspection unit and site construction/installation activities
• Identification and preparation of Long Lead Equipment list
• Correspondences with vendors and close out technical clarifications with vendors.
• Preparation of production figure (ups/down)
• Prepare and follow-up design documentation for rotating equipment submitted by selected vendor
• Verify mechanical design, sizing calculations, engineering software input/out-put results
• Analysis of contract documents and design criteria
• Evaluation of vendor un-priced technical proposals ensuring compliance with purchase order and also
recommending viable vendor for supply. And also check equipment after arriving at site.
.
4. • Assist my departmental head sometimes in review of related capital expenditure proposals, for preparation of
annual company budget.
• Adhered to company HSE and QC regulations, procedures and objectives
• Report construction weekly progress & observed potential bottlenecks for the progress of work, to my line
manager
EDUCATIONAL CREDENTIALS
B. Eng, Electrical and Electronics Engineering (Second Class Hons, Lower Division), 2005
Ambrose Alli University (AAU) Ekpoma, Edo State, Nigeria (1999-2005)
Ogiedi mixed Secondary School, Sapele, Nigeria (1989 – 1994)
Senior School Certificate Examination (SSCE), 1994
Professional Qualification and Training
• Basic Offshore Safety Induction and Emergency Training (September, 2003)
• Nigerian Institution of Electrical Electronics Engineers
• HSE Competent Persons Fast Track Course
IT Skills
• Familiar with MS-office packages, Office outlook, AUTO-CAD
Professional Affiliation
• Member, Nigerian Society of Engineers (NSE: NO-32,766)
• Registered Electrical Engineer, Council for the Regulation of Engineering in Nigeria (COREN) – NO: R. 23,756)
PERSONAL PROFILE
• Nationality : Nigerian
• Date of Birth : 27th
December 1976
• Marital Status : Married
• Sex : Male
• Language : English Language