Groschopp 05267 specsheet
•
0 likes•45 views
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a voltage of 230V and speed of 1510 rpm. The motor has a rated speed of 1521.8 rpm, torque of 5.9 lb-in, current of 0.67 amps, output of 107 watts, and output of 0.1432 HP. Start/stall conditions are a current of 1.77 amps and torque of 10.38 lb-in. The motor has an efficiency of 58.4% and can operate continuously with no gearbox.
Report
Share
Report
Share
Download to read offline
Recommended
Groschopp 05320 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a voltage of 115V, speed of 1510 rpm, and no gearbox. Key specifications include a rated speed of 1507.5 rpm, torque of 2.4 lb-in, current of 0.76 amps, output of 42 watts, and efficiency of 47.8%. Performance charts show torque and speed values at various RPMs as well as efficiency curves for cold and hot operation.
Groschopp 66045 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a PL 7300 120:1 ratio gearbox. The motor operates at 230V 60Hz and 1510 rpm, with the gearbox providing an output of 12.7 rpm at 540.1 lb-in of torque. Charts show torque and efficiency at varying speeds for cold and hot operating conditions. The system has a continuous duty cycle and maximum efficiencies of 75.9% for the gearbox, 58.4% for the motor, and 44.3% for the overall system. It is sold and serviced by Electromate.
Groschopp 05293 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a voltage of 230V, 50Hz, and speed of 2500rpm without a gearbox. Key specifications include an output speed of 2522rpm, torque of 5.9lb-in, current of 0.96amps, power of 177watts, and horsepower of 0.2367HP. The motor has a breakdown speed of 1582.94rpm, pullup torque of 10.35lb-in, and continuous duty cycle. Start/stall conditions are 2.65amps current and 10.35lb-in torque. Efficiency curves and contact information for the distributor Electromate are also provided.
Groschopp 66367 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 115V 60Hz voltage and 3000 rpm speed connected to an RP 7300 160:1 ratio gearbox. Key specifications include an output speed of 19.6 rpm, torque of 424.8 lb-in, current of 2.36 amps, and efficiency between 54.1-67.7% depending on the motor, gearbox, or full system. Startup conditions include 4.88 amps of current and 487.84 lb-in of torque. Performance charts also show torque and speed output at varying RPMs along with efficiency levels when cold or hot.
Groschopp 05296 specsheet
This document provides specifications for an AC 3 Phase 8060 TEFC motor with a voltage of 230V, frequency of 50Hz, and speed of 2590rpm without a gearbox. Key specifications include a rating of 2590rpm, 0.3748HP, 69.1% efficiency, and a start/stall current of 4.33amps and torque of 18.10lb-in. A graph shows efficiency curves for the motor at different torque and speed levels when cold and hot.
Groschopp 05319 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a voltage of 230V, 50Hz, and speed of 2540 rpm. Key specifications include a rating of 2537.1 rpm and 5.1 lb-in of torque drawing 1.17 amps of current. Performance charts show speed and efficiency at varying torque levels. The motor has a 58.2% efficiency and continuous duty cycle. It is sold and serviced by Electromate.
Groschopp 66385 specsheet
This document provides specifications for an AC induction motor with a 10:1 gearbox including voltage, speed, torque, current, and efficiency levels both at normal operating temperatures and under cold start conditions. Key details are the motor runs at 151.0 rpm and 11.6 lb-in of torque drawing 0.38 amps of current. The gearbox and motor efficiencies are 49.4% and 48.6% respectively yielding a system efficiency of 24.0%.
Groschopp 66373 specsheet
This document provides specifications for an AC motor including its voltage, speed, gearbox ratio, product ID number, ratings for speed, torque, current and output. It also details startup, breakdown, pullup and efficiency characteristics along with duty cycle, current and torque requirements for starting and stalling. Performance curves are shown for speed, efficiency and torque both when cold and hot.
Recommended
Groschopp 05320 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a voltage of 115V, speed of 1510 rpm, and no gearbox. Key specifications include a rated speed of 1507.5 rpm, torque of 2.4 lb-in, current of 0.76 amps, output of 42 watts, and efficiency of 47.8%. Performance charts show torque and speed values at various RPMs as well as efficiency curves for cold and hot operation.
Groschopp 66045 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a PL 7300 120:1 ratio gearbox. The motor operates at 230V 60Hz and 1510 rpm, with the gearbox providing an output of 12.7 rpm at 540.1 lb-in of torque. Charts show torque and efficiency at varying speeds for cold and hot operating conditions. The system has a continuous duty cycle and maximum efficiencies of 75.9% for the gearbox, 58.4% for the motor, and 44.3% for the overall system. It is sold and serviced by Electromate.
Groschopp 05293 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a voltage of 230V, 50Hz, and speed of 2500rpm without a gearbox. Key specifications include an output speed of 2522rpm, torque of 5.9lb-in, current of 0.96amps, power of 177watts, and horsepower of 0.2367HP. The motor has a breakdown speed of 1582.94rpm, pullup torque of 10.35lb-in, and continuous duty cycle. Start/stall conditions are 2.65amps current and 10.35lb-in torque. Efficiency curves and contact information for the distributor Electromate are also provided.
Groschopp 66367 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 115V 60Hz voltage and 3000 rpm speed connected to an RP 7300 160:1 ratio gearbox. Key specifications include an output speed of 19.6 rpm, torque of 424.8 lb-in, current of 2.36 amps, and efficiency between 54.1-67.7% depending on the motor, gearbox, or full system. Startup conditions include 4.88 amps of current and 487.84 lb-in of torque. Performance charts also show torque and speed output at varying RPMs along with efficiency levels when cold or hot.
Groschopp 05296 specsheet
This document provides specifications for an AC 3 Phase 8060 TEFC motor with a voltage of 230V, frequency of 50Hz, and speed of 2590rpm without a gearbox. Key specifications include a rating of 2590rpm, 0.3748HP, 69.1% efficiency, and a start/stall current of 4.33amps and torque of 18.10lb-in. A graph shows efficiency curves for the motor at different torque and speed levels when cold and hot.
Groschopp 05319 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a voltage of 230V, 50Hz, and speed of 2540 rpm. Key specifications include a rating of 2537.1 rpm and 5.1 lb-in of torque drawing 1.17 amps of current. Performance charts show speed and efficiency at varying torque levels. The motor has a 58.2% efficiency and continuous duty cycle. It is sold and serviced by Electromate.
Groschopp 66385 specsheet
This document provides specifications for an AC induction motor with a 10:1 gearbox including voltage, speed, torque, current, and efficiency levels both at normal operating temperatures and under cold start conditions. Key details are the motor runs at 151.0 rpm and 11.6 lb-in of torque drawing 0.38 amps of current. The gearbox and motor efficiencies are 49.4% and 48.6% respectively yielding a system efficiency of 24.0%.
Groschopp 66373 specsheet
This document provides specifications for an AC motor including its voltage, speed, gearbox ratio, product ID number, ratings for speed, torque, current and output. It also details startup, breakdown, pullup and efficiency characteristics along with duty cycle, current and torque requirements for starting and stalling. Performance curves are shown for speed, efficiency and torque both when cold and hot.
Groschopp 66372 specsheet
This document provides specifications for a small AC motor including its voltage, speed, gearbox ratio, and performance metrics like torque and efficiency at various speeds. It lists the motor's rating, breakdown torque, pullup torque, duty cycle, and start/stall conditions. Charts show how torque, speed, and efficiency vary depending on the load. The motor is powered by 115V AC, has a maximum speed of 1510rpm, and a 5.1:1 gear ratio. It can deliver up to 9.7lb-in of torque and has peak efficiencies of 47.8% for the motor and 21.1% for the overall system.
Groschopp 66381 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a 184:1 ratio RP 7300 gearbox. Key specifications include a voltage of 115v, speed of 1510 rpm, output speed of 8.2 rpm, output torque of 219.8 lb-in, current of 0.76 amps, and output power of 21 watts. Charts show torque and efficiency at varying speeds both when cold and hot.
Groschopp 05152 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 230V, 50Hz, and speed of 2430rpm. The motor has a rating of 2425.3rpm and 1.5lb-in of torque while drawing 0.47amps and producing 42watts and 0.0560HP of output. Breakdown and pullup tests were also performed. Efficiency is listed for various torque levels. The motor is intended for continuous duty and has a startup current of 0.82amps and stall torque of 1.40lb-in. Contact information is provided for the distributor Electromate.
Groschopp 74500 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510rpm speed connected to a RA 2600T 7.5:1 ratio gearbox. The motor and gearbox combination can output 202.9rpm and 30.1lb-in of torque at 0.67amps and 72watts or 0.0970HP. Charts show torque and speed breakdown, pullup, efficiency versus torque for both cold and hot operating conditions. The system is designed for continuous duty cycle and has a start/stall current of 1.77amps and torque of 57.96lb-in. The document concludes with contact information for the seller and service provider, Electromate
Groschopp 66368 specsheet
This document provides specifications for an AC motor with a high-ratio gearbox. The motor runs on 115V 60Hz power, has a no-load speed of 3000rpm, and is paired with a 246:1 ratio gearbox. Key specifications include an no-load output of 13.1rpm and 488.1lb-in of torque. Charts show torque and efficiency at varying speeds under cold and hot operating conditions. The system has a continuous duty cycle and maximum efficiencies of 62.2% for the gearbox, 49.6% for the motor, and 30.9% for the combined system.
Groschopp 74542 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a RA 3000T 25:1 ratio gearbox. The motor operates at 230V 50Hz and has a no-load speed of 52.6rpm, output torque of 95lb-in, and current of 0.75amps. The gearbox has efficiencies of 60.7% for the gearbox, 54.3% for the motor, and 32.9% for the overall system. Startup conditions draw 1.77amps with 217.13lb-in of torque. Performance charts provide torque, speed, efficiency, and RPM data across a range of operating points. The motor and gearbox combination is sold and serviced by
Groschopp 74522 specsheet
This document provides specifications for a motor including an AC 3 Phase 8040 TENV motor that operates at 230V 50Hz with a 1350 rpm speed and RA 2600T 15:1 ratio gearbox. The motor has a rated output of 89.9 rpm and 26.5 lb-in of torque while drawing 0.44 amps of current. Charts show torque and speed characteristics along with efficiency at varying torque levels.
Groschopp 05306 specsheet
This document provides specifications for an AC 1 Ph 8040 TEFC motor with a voltage of 115V, speed of 2910 rpm, and no gearbox. Key specifications include a rated speed of 2907.9 rpm, torque of 3.1 lb-in, current of 1.88 amps, output power of 107 watts, and efficiency of 50.9%. Startup conditions include a current of 3.18 amps and torque of 3.04 lb-in. A graph shows efficiency and speed curves versus torque.
Groschopp 66369 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 5:1 ratio RP 7300 gearbox. The motor operates at 230V 60Hz with a speed of 3000 rpm and 2 poles. It has an output of 638.8 rpm, 8.9 lb-in of torque, and 1.11 amps of current drawing 67 watts of power, or 0.0903 HP. The gearbox has efficiencies of 53.6% for the gearbox, 51.2% for the motor, and 27.4% for the overall system. Startup requires 2.36 amps and generates 11.3 lb-in of torque.
Groschopp 47787 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a 5:1 ratio gearbox. Key specifications include a no-load speed of 630.7 rpm, start/stall torque of 11.25 lb-in, and maximum efficiencies of 82.8% for the gearbox and 54.8% for the motor. Performance charts show speed, torque, and efficiency at various loads both cold and hot. The motor and gearbox assembly is sold and serviced by Electromate.
Groschopp 74502 specsheet
This document provides specifications for a 3 phase 8040 TEFC AC motor with a 230V 60Hz voltage and 1510 rpm speed connected to a RA 2600T 15:1 ratio gearbox. The motor has a rated output of 101.5 rpm, 57.5 lb-in of torque, and 0.67 amps of current. Breakdown and pullup tests were also performed, providing speed, torque, current and efficiency data across a range of torques and rpm. The motor, gearbox and system efficiencies are listed as well as start/stall current and torque conditions.
Groschopp 74538 specsheet
The document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 50Hz voltage and 1320rpm speed connected to a RA 2600T 5:1 ratio gearbox. The motor has a rated output of 263rpm and 21.5lb-in of torque while drawing 0.75amps of current. Charts show the motor's torque, speed, and efficiency characteristics at various loads when cold and hot. The motor is intended for continuous duty and has a starting torque of 49.34lb-in while drawing 1.77amps.
Groschopp 05314 specsheet
This document provides specifications for an AC single-phase 8060 TEFC motor with a voltage of 115V, speed of 3000 rpm, and no gearbox. The motor has a rated speed of 3001.9 rpm, torque of 4.7 lb-in, current of 2.64 amps, output of 168 watts, and efficiency of 56.8%. Startup conditions include a current of 4.88 amps and torque of 4.45 lb-in. A graph shows efficiency and speed curves versus torque in both cold and hot conditions.
Groschopp 05298 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a rating of 1349 RPM and 3.4 lb-in of torque consuming 0.44 amps of current. The motor has a continuous duty cycle and 51% efficiency. Under cold start/stall conditions, the motor produces 1.17 amps of current and 8.35 lb-in of torque. A graph shows efficiency decreases with increased torque from a maximum of 90% at low torque to 51% at peak torque.
Groschopp 05298 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a rating of 1349 RPM and 3.4 lb-in of torque consuming 0.44 amps of current. The motor has a breakdown speed of 671 RPM and pullup speed of 34 RPM. It has continuous duty and an efficiency of 51% for the gearbox, motor, and system. Startup requires 1.17 amps and generates 8.35 lb-in of torque. A graph shows efficiency decreases with increased torque from 90% at 0 RPM to 10% at 1350 RPM.
Groschopp 05266 specsheet
The document provides specifications for an AC 3 Phase 8040 TENV motor with a rating of 1547.7 rpm, 3.7lb-in of torque, and 0.40 amps of current. It details performance metrics like breakdown speed of 959.73 rpm and pullup torque of 6.55lb-in. Charts show efficiency levels at different torque and speed values. The motor has a continuous duty cycle and 60.2% efficiency. It is sold and serviced by Electromate.
Groschopp 05266 specsheet
The document provides specifications for an AC 3 Phase 8040 TENV motor with a rating of 1547.7 rpm, 3.7lb-in of torque, and 0.40 amps of current. It details performance metrics like breakdown speed of 959.73 rpm and pullup torque of 6.55lb-in. Charts show efficiency levels at different torque and speed values. The motor has a continuous duty cycle and 60.2% efficiency. It is sold and serviced by Electromate.
Groschopp 05301 specsheet
This document provides specifications for an AC 3 Phase 8060 TEFC motor with a voltage of 230V, frequency of 50Hz, and speed of 1360rpm without a gearbox. Key specifications include a rated speed of 1355rpm, torque of 7.9lb-in, current of 1.02amps, output of 127watts, and efficiency of 56.4%. Start/stall conditions are listed as 2.69amps current and 19.94lb-in torque. A graph shows efficiency and speed curves versus torque. The motor is sold and serviced by Electromate.
Groschopp 05301 specsheet
This document provides specifications for an AC 3 Phase 8060 TEFC motor with a voltage of 230V, frequency of 50Hz, and speed of 1360rpm without a gearbox. Key specifications include a rated speed of 1355rpm, torque of 7.9lb-in, current of 1.02amps, output of 127watts, and efficiency of 56.4%. Start/stall conditions are listed as 2.69amps current and 19.94lb-in torque. A graph shows efficiency and speed curves versus torque. The motor is sold and serviced by Electromate.
Groschopp 05303 specsheet
This document provides specifications for an AC 3 Phase 8060 TEFC motor with a voltage of 230V, speed of 1600 rpm, and output of 186 watts. The motor has an efficiency of 64.2% and can operate continuously. It produces 9.8 lb-in of torque at 1600 rpm and has a startup current of 3.35 amps and torque of 21.73 lb-in. Charts show its torque and efficiency curves from 0 to 1800 rpm under cold and hot operating conditions. The motor is sold and serviced by Electromate.
Groschopp 05303 specsheet
This document provides specifications for an AC 3 Phase 8060 TEFC motor with a voltage of 230V, speed of 1600 rpm, and output of 186 watts. The motor has an efficiency of 64.2% and can operate continuously. It produces 9.8 lb-in of torque at 1600 rpm and has a startup current of 3.35 amps and torque of 21.73 lb-in. Charts show its torque and efficiency curves from 0 to 1800 rpm. The motor is sold and serviced by Electromate.
Groschopp 05320 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a voltage of 115V, speed of 1510 rpm, and no gearbox. Key specifications include a rated speed of 1507.5 rpm, torque of 2.4 lb-in, current of 0.76 amps, output of 42 watts, and efficiency of 47.8%. Start/stall conditions are listed as 1.34 amps current and 2.28 lb-in torque. A graph shows efficiency and speed versus torque from 0 to 1800 rpm. Notes indicate a 10uF 250V capacitor. The motor is sold and serviced by Electromate.
More Related Content
What's hot
Groschopp 66372 specsheet
This document provides specifications for a small AC motor including its voltage, speed, gearbox ratio, and performance metrics like torque and efficiency at various speeds. It lists the motor's rating, breakdown torque, pullup torque, duty cycle, and start/stall conditions. Charts show how torque, speed, and efficiency vary depending on the load. The motor is powered by 115V AC, has a maximum speed of 1510rpm, and a 5.1:1 gear ratio. It can deliver up to 9.7lb-in of torque and has peak efficiencies of 47.8% for the motor and 21.1% for the overall system.
Groschopp 66381 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a 184:1 ratio RP 7300 gearbox. Key specifications include a voltage of 115v, speed of 1510 rpm, output speed of 8.2 rpm, output torque of 219.8 lb-in, current of 0.76 amps, and output power of 21 watts. Charts show torque and efficiency at varying speeds both when cold and hot.
Groschopp 05152 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 230V, 50Hz, and speed of 2430rpm. The motor has a rating of 2425.3rpm and 1.5lb-in of torque while drawing 0.47amps and producing 42watts and 0.0560HP of output. Breakdown and pullup tests were also performed. Efficiency is listed for various torque levels. The motor is intended for continuous duty and has a startup current of 0.82amps and stall torque of 1.40lb-in. Contact information is provided for the distributor Electromate.
Groschopp 74500 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510rpm speed connected to a RA 2600T 7.5:1 ratio gearbox. The motor and gearbox combination can output 202.9rpm and 30.1lb-in of torque at 0.67amps and 72watts or 0.0970HP. Charts show torque and speed breakdown, pullup, efficiency versus torque for both cold and hot operating conditions. The system is designed for continuous duty cycle and has a start/stall current of 1.77amps and torque of 57.96lb-in. The document concludes with contact information for the seller and service provider, Electromate
Groschopp 66368 specsheet
This document provides specifications for an AC motor with a high-ratio gearbox. The motor runs on 115V 60Hz power, has a no-load speed of 3000rpm, and is paired with a 246:1 ratio gearbox. Key specifications include an no-load output of 13.1rpm and 488.1lb-in of torque. Charts show torque and efficiency at varying speeds under cold and hot operating conditions. The system has a continuous duty cycle and maximum efficiencies of 62.2% for the gearbox, 49.6% for the motor, and 30.9% for the combined system.
Groschopp 74542 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a RA 3000T 25:1 ratio gearbox. The motor operates at 230V 50Hz and has a no-load speed of 52.6rpm, output torque of 95lb-in, and current of 0.75amps. The gearbox has efficiencies of 60.7% for the gearbox, 54.3% for the motor, and 32.9% for the overall system. Startup conditions draw 1.77amps with 217.13lb-in of torque. Performance charts provide torque, speed, efficiency, and RPM data across a range of operating points. The motor and gearbox combination is sold and serviced by
Groschopp 74522 specsheet
This document provides specifications for a motor including an AC 3 Phase 8040 TENV motor that operates at 230V 50Hz with a 1350 rpm speed and RA 2600T 15:1 ratio gearbox. The motor has a rated output of 89.9 rpm and 26.5 lb-in of torque while drawing 0.44 amps of current. Charts show torque and speed characteristics along with efficiency at varying torque levels.
Groschopp 05306 specsheet
This document provides specifications for an AC 1 Ph 8040 TEFC motor with a voltage of 115V, speed of 2910 rpm, and no gearbox. Key specifications include a rated speed of 2907.9 rpm, torque of 3.1 lb-in, current of 1.88 amps, output power of 107 watts, and efficiency of 50.9%. Startup conditions include a current of 3.18 amps and torque of 3.04 lb-in. A graph shows efficiency and speed curves versus torque.
Groschopp 66369 specsheet
This document provides specifications for an AC 1 Ph 8060 TEFC motor with a 5:1 ratio RP 7300 gearbox. The motor operates at 230V 60Hz with a speed of 3000 rpm and 2 poles. It has an output of 638.8 rpm, 8.9 lb-in of torque, and 1.11 amps of current drawing 67 watts of power, or 0.0903 HP. The gearbox has efficiencies of 53.6% for the gearbox, 51.2% for the motor, and 27.4% for the overall system. Startup requires 2.36 amps and generates 11.3 lb-in of torque.
Groschopp 47787 specsheet
This document provides specifications for an AC 3 Phase 6540 TENV motor with a 5:1 ratio gearbox. Key specifications include a no-load speed of 630.7 rpm, start/stall torque of 11.25 lb-in, and maximum efficiencies of 82.8% for the gearbox and 54.8% for the motor. Performance charts show speed, torque, and efficiency at various loads both cold and hot. The motor and gearbox assembly is sold and serviced by Electromate.
Groschopp 74502 specsheet
This document provides specifications for a 3 phase 8040 TEFC AC motor with a 230V 60Hz voltage and 1510 rpm speed connected to a RA 2600T 15:1 ratio gearbox. The motor has a rated output of 101.5 rpm, 57.5 lb-in of torque, and 0.67 amps of current. Breakdown and pullup tests were also performed, providing speed, torque, current and efficiency data across a range of torques and rpm. The motor, gearbox and system efficiencies are listed as well as start/stall current and torque conditions.
Groschopp 74538 specsheet
The document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 50Hz voltage and 1320rpm speed connected to a RA 2600T 5:1 ratio gearbox. The motor has a rated output of 263rpm and 21.5lb-in of torque while drawing 0.75amps of current. Charts show the motor's torque, speed, and efficiency characteristics at various loads when cold and hot. The motor is intended for continuous duty and has a starting torque of 49.34lb-in while drawing 1.77amps.
Groschopp 05314 specsheet
This document provides specifications for an AC single-phase 8060 TEFC motor with a voltage of 115V, speed of 3000 rpm, and no gearbox. The motor has a rated speed of 3001.9 rpm, torque of 4.7 lb-in, current of 2.64 amps, output of 168 watts, and efficiency of 56.8%. Startup conditions include a current of 4.88 amps and torque of 4.45 lb-in. A graph shows efficiency and speed curves versus torque in both cold and hot conditions.
What's hot (13)
Similar to Groschopp 05267 specsheet
Groschopp 05298 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a rating of 1349 RPM and 3.4 lb-in of torque consuming 0.44 amps of current. The motor has a continuous duty cycle and 51% efficiency. Under cold start/stall conditions, the motor produces 1.17 amps of current and 8.35 lb-in of torque. A graph shows efficiency decreases with increased torque from a maximum of 90% at low torque to 51% at peak torque.
Groschopp 05298 specsheet
This document provides specifications for an AC 3 Phase 8040 TENV motor with a rating of 1349 RPM and 3.4 lb-in of torque consuming 0.44 amps of current. The motor has a breakdown speed of 671 RPM and pullup speed of 34 RPM. It has continuous duty and an efficiency of 51% for the gearbox, motor, and system. Startup requires 1.17 amps and generates 8.35 lb-in of torque. A graph shows efficiency decreases with increased torque from 90% at 0 RPM to 10% at 1350 RPM.
Groschopp 05266 specsheet
The document provides specifications for an AC 3 Phase 8040 TENV motor with a rating of 1547.7 rpm, 3.7lb-in of torque, and 0.40 amps of current. It details performance metrics like breakdown speed of 959.73 rpm and pullup torque of 6.55lb-in. Charts show efficiency levels at different torque and speed values. The motor has a continuous duty cycle and 60.2% efficiency. It is sold and serviced by Electromate.
Groschopp 05266 specsheet
The document provides specifications for an AC 3 Phase 8040 TENV motor with a rating of 1547.7 rpm, 3.7lb-in of torque, and 0.40 amps of current. It details performance metrics like breakdown speed of 959.73 rpm and pullup torque of 6.55lb-in. Charts show efficiency levels at different torque and speed values. The motor has a continuous duty cycle and 60.2% efficiency. It is sold and serviced by Electromate.
Groschopp 05301 specsheet
This document provides specifications for an AC 3 Phase 8060 TEFC motor with a voltage of 230V, frequency of 50Hz, and speed of 1360rpm without a gearbox. Key specifications include a rated speed of 1355rpm, torque of 7.9lb-in, current of 1.02amps, output of 127watts, and efficiency of 56.4%. Start/stall conditions are listed as 2.69amps current and 19.94lb-in torque. A graph shows efficiency and speed curves versus torque. The motor is sold and serviced by Electromate.
Groschopp 05301 specsheet
This document provides specifications for an AC 3 Phase 8060 TEFC motor with a voltage of 230V, frequency of 50Hz, and speed of 1360rpm without a gearbox. Key specifications include a rated speed of 1355rpm, torque of 7.9lb-in, current of 1.02amps, output of 127watts, and efficiency of 56.4%. Start/stall conditions are listed as 2.69amps current and 19.94lb-in torque. A graph shows efficiency and speed curves versus torque. The motor is sold and serviced by Electromate.
Groschopp 05303 specsheet
This document provides specifications for an AC 3 Phase 8060 TEFC motor with a voltage of 230V, speed of 1600 rpm, and output of 186 watts. The motor has an efficiency of 64.2% and can operate continuously. It produces 9.8 lb-in of torque at 1600 rpm and has a startup current of 3.35 amps and torque of 21.73 lb-in. Charts show its torque and efficiency curves from 0 to 1800 rpm under cold and hot operating conditions. The motor is sold and serviced by Electromate.
Groschopp 05303 specsheet
This document provides specifications for an AC 3 Phase 8060 TEFC motor with a voltage of 230V, speed of 1600 rpm, and output of 186 watts. The motor has an efficiency of 64.2% and can operate continuously. It produces 9.8 lb-in of torque at 1600 rpm and has a startup current of 3.35 amps and torque of 21.73 lb-in. Charts show its torque and efficiency curves from 0 to 1800 rpm. The motor is sold and serviced by Electromate.
Groschopp 05320 specsheet
This document provides specifications for an AC 1 Ph 8040 TENV motor with a voltage of 115V, speed of 1510 rpm, and no gearbox. Key specifications include a rated speed of 1507.5 rpm, torque of 2.4 lb-in, current of 0.76 amps, output of 42 watts, and efficiency of 47.8%. Start/stall conditions are listed as 1.34 amps current and 2.28 lb-in torque. A graph shows efficiency and speed versus torque from 0 to 1800 rpm. Notes indicate a 10uF 250V capacitor. The motor is sold and serviced by Electromate.
Groschopp 05314 specsheet
This document provides specifications for an AC single-phase 8060 TEFC motor with a voltage of 115V, speed of 3000 rpm, and no gearbox. The motor has a rated speed of 3001.9 rpm, torque of 4.7 lb-in, current of 2.64 amps, output of 168 watts, and efficiency of 56.8%. Startup conditions include a current of 4.88 amps and torque of 4.45 lb-in. A graph shows efficiency and speed curves versus torque in both cold and hot conditions.
Groschopp 47781 specsheet
This document provides specifications for a small AC motor including its voltage, speed, gearbox ratio, and performance metrics like torque and efficiency at varying speeds. It lists the motor's rating as 149.3 rpm and 7.9 lb-in of torque drawing 0.33 amps of current. Charts show its torque and efficiency characteristics both when cold and hot.
Groschopp 66044 specsheet
This document provides specifications for an AC 3 Phase 8040 TEFC motor with a 230V 60Hz voltage and 1510 rpm speed connected to a PL 7300 90:1 ratio gearbox. The motor has a rating of 0.1109 HP at 16.9 rpm with an output torque of 413.5 lb-in, drawing 0.67 amps of current. Charts show torque and efficiency at varying speeds for both cold and hot operating conditions.
Groschopp 05270 specsheet
The document provides specifications for an AC 3 Phase 8040 TENV motor with a rating of 3153 RPM and 3.4 lb-in of torque that draws 0.54 amps of current. The motor produces 126 watts of output power equivalent to 0.1686 HP. It has a breakdown speed of 1989.18 RPM and pullup torque of 6.45 lb-in. The motor has a continuous duty cycle and system efficiency of 70.4%. It requires 1.99 amps and can produce up to 6.45 lb-in of torque for starting and stalling. A graph shows efficiency levels over a range of torques and speeds when cold and hot.
Groschopp 05270 specsheet
The document provides specifications for an AC 3 Phase 8040 TENV motor with a rating of 3153 RPM and 3.4 lb-in of torque that draws 0.54 amps of current. The motor produces 126 watts of output power equivalent to 0.1686 HP. It has a breakdown speed of 1989.18 RPM and pullup torque of 6.45 lb-in. The motor has a continuous duty cycle and system efficiency of 70.4%. It requires 1.99 amps and can produce up to 6.45 lb-in of torque for starting and stalling. A graph shows efficiency levels over a range of torques and speeds when cold and hot.
Groschopp 05306 specsheet
This document provides specifications for an AC 1 Ph 8040 TEFC motor with a voltage of 115V, speed of 2910 rpm, and no gearbox. Key specifications include a rated speed of 2907.9 rpm, torque of 3.1 lb-in, current of 1.88 amps, output power of 107 watts, and efficiency of 50.9%. Startup conditions include a current of 3.18 amps and torque of 3.04 lb-in. A graph shows efficiency and speed curves versus torque.
Groschopp 05128 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 230V, speed of 1490 rpm, and no gearbox. Key specifications include a rating of 1493.1 rpm and 1.0 lb-in of torque drawing 0.33 amps of current. Performance tests found a breakdown speed of 1015.34 rpm and pullup speed of 0 rpm. The motor has a continuous duty cycle and system efficiency of 28.6%. Startup requires 0.43 amps and produces 1.27 lb-in of torque. A graph shows efficiency decreases with increasing torque from 90% at 0 rpm to 20% at 1600 rpm.
Groschopp 05128 specsheet
This document provides specifications for an AC 1 Ph 6540 TEFC motor with a voltage of 230V, speed of 1490 rpm, and output of 18 watts. Key specifications include a rating of 1493.1 rpm and 1.0 lb-in of torque at 0.33 amps of current. The motor has a breakdown speed of 1015.34 rpm and pullup torque of 1.27lb-in. It has a continuous duty cycle and system efficiency of 28.6%. Start/stall conditions are 0.43 amps and 1.27 lb-in of torque. A graph shows efficiency versus torque from 0 to 1600 rpm. It is sold and serviced by Electromate.
Groschopp 05302 specsheet
This document provides specifications for an AC 3 Phase 8060 TENV motor with a rating of 1650 RPM, 5.3 lb-in of torque, 0.69 amps of current, and 103 watts of output power. The motor has a breakdown torque of 15.9 lb-in at 899 RPM and a pullup torque of 14.59 lb-in at 73.7 RPM. It has a continuous duty cycle and system efficiency of 64.7%. Under start/stall conditions, the motor draws 2.35 amps and produces 14.6 lb-in of torque.
Groschopp 05302 specsheet
This document provides specifications for an AC 3 Phase 8060 TENV motor with a rating of 1650 RPM, 5.3 lb-in of torque, 0.69 amps of current, and 103 watts of output power. The motor has a breakdown torque of 15.9 lb-in at 899 RPM and a pullup torque of 14.59 lb-in at 73.7 RPM. It has a continuous duty cycle and system efficiency of 64.7%. Under start/stall conditions, the motor draws 2.35 amps of current and produces 14.6 lb-in of torque.
Groschopp 47750 specsheet
This document provides specifications for a AC 3 Ph 6540 TENV motor with a 240:1 ratio gearbox. Key details include:
- The motor operates at 230V 60Hz and 1460 rpm, with the gearbox providing an output of 6.4 rpm and 125 lb-in of torque under normal operating conditions.
- Under maximum "breakdown" and "pullup" loads, the motor can provide up to 3.9 rpm and 377 lb-in of torque, or 1.7 rpm and 340 lb-in of torque respectively.
- Efficiency is highest at full load, with the gearbox, motor, and overall system achieving up to 60.1%, 38.0%, and
Similar to Groschopp 05267 specsheet (20)
More from Electromate
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular Specs
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with Brake
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported Specs
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CA
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported Specs
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
Thomson Linear WhisperTrak Actuators
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
Thomson T-Series Profile Rail
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC Specs
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB Specs
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
More from Electromate (20)
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
Automated screw thread quality checking using SMAC LAR55 actuator new produc...
An overview of the various kinematic models in both parallel and serial robot...
An overview of the various kinematic models in both parallel and serial robot...
Galil motion control robotic symposium presentation-linear motion from non-li...
Galil motion control robotic symposium presentation-linear motion from non-li...
Advanced motion controls robotics symposium presentation-open standard tools ...
Advanced motion controls robotics symposium presentation-open standard tools ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Maxon motor ag robotic symposium presentation-impedance control overview and ...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Harmonic drive llc robotics symposium presentation-designing from the inside ...
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 2CA Web Universal Carriage Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 1VC Double End Supported Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 2CA Web Flanged Carriage Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail 1VC Double Unsupported Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear RoundRail Accessories Collapsable Bellows Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear Roundrail Dual Shaft Rail 2DA Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PC Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Thomson Linear RoundRail Continuous Support 1PB Specs
Recently uploaded
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
Recently uploaded (20)
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Groschopp 05267 specsheet
- 1. Prepared by: Groschopp.com 02/24/14 Motor: Voltage: Speed: Gearbox: AC 3 Ph 8040 TEFC 230 v 60 Hz 1510 rpm 4 Poles None Product ID: 5267 SPECIFICATIONS Rating: Speed: Torque: Current: Output: Output: 1521.8 rpm 5.9lb-in 0.67 amps 107 watts 0.1432 HP Breakdown (Cold): Speed: Torque: 908.31 rpm 11.29 lb-in Pullup (Cold): Speed: Torque: 90.1 rpm 10.38lb-in Duty Cycle: On: Off: Continuous Efficiency: Gearbox: Motor: System: 58.4 % 58.4 % Start/Stall Conditions: Current: Torque: 1.77 amps 10.38 lb-in Torque (lb-in) Speed RPM Efficiency 200 0 0.0 1.2 400 2.4 600 3.6 800 4.8 1000 6.0 1200 7.2 1400 8.4 1600 9.6 1800 10.8 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 Speed, Efficiency Vs. Torque Cold Hot Notes: Sold & Serviced By: ELECTROMATE Toll Free Phone (877) SERVO98 Toll Free Fax (877) SERV099 www.electromate.com sales@electromate.com