1. AUTOMATIC BREAK FAILURE AND ENGINE HEAT
CONTROLLER
ABSTRACT
In this project we are going to control break failure and engine heat
automatically by embedded controller. When break failures in the
vehicle, at the time ignition can be switched off automatically and
also if the temperature increases the limited level, water pump will be
turned on and cooling fan also be turned on automatically by
switching the relay. All the control of this system will be monitored
and controlled by the high speed microcontroller peripheral interface
controller PIC16f877a. Here we used LCD for user interaction to
show the temperature level and the parameter which are included in
this project.

2. BLOCK DIAGRAM