2. Equipment and Accessories Tools Materials
LAN Card
UPS
Server
24 Port-Hub
Modem
Fax Machine
PC Video Camera
USB External CD Writer
USB Scanner
USB Printers
USB Flash Drive
LAN Card
UPS
Server
24 Port-Hub
Modem
Fax Machine
PC Video Camera
USB External CD Writer
USB Scanner
USB Printers
USB Flash Drive
USB Flash Drive
LAN Card
UPS
Server
24 Port-Hub
Modem
Fax Machine
PC Video Camera
USB External CD Writer
3. LAN Card – is a network
interface card. This is a
computer circuit board or
card that is installed in a
computer so that it can be
connected to a network.
4. Server – is a part of a
network. It is a special
computer that users on the
network can access to carry
out a particular job.
5. Port hub /Port – is a
connector on the back of a
computer or other device. A
port is either a serial port or
a parallel port.
6. Modem - (Modulator-
Demodulator) The modem is
a device that allows a given
computer to share data or
otherwise a device which let
computers exchange
information
7. Scanner- it is an input
device that read text or
illustration printed on paper,
translates the information
into a form that a computer
can use
8. Scanner- it is an input
device that read text or
illustration printed on paper,
translates the information
into a form that a computer
can use
9. Flat Screw Driver – is used
to drive or fasten
negative slotted screws
10. USB – Universal Serial Bus,
a hardware interface for
low-speed peripherals such
as the keyboard, mouse,
joystick, scanner, printer
and telephony devices.
11. Printer - is a piece of
hardware that produces a
paper copy (also known as
‘hardcopy’) of the
information generated by
the computer.
12. RAM – Random Access
Memory, is a primary
memory. This memory is
used inside the computer to
hold programs and data
while it is running.
13. BIOS – Basic Input / Output
System, chip that controls
the most basic functions of
the computer and performs
a self-test every time you
turn it on.
14. Flash drive– RAM that can
retain data without
electrical power. It is widely
used for BIOS chips and for
digital camera and digital
music storage.
15. Video Camera - camera
using videotape: a camera
that records onto videotape.
16. Long nose Pliers – is used
for holding, bending and
stretching the lead of
electronics component or
connecting wire.
17. Soldering Iron – is used to
join two or more metal
conductors with the support
of soldering lead melted
around it.
18. Desoldering Tool – is used
to unsolder unwanted parts
or component in the circuit
with the support of soldering
pencil.
20. LAN Tester- for RJ11,12,45
& BNC w/ Remote Unit This
ergonomic tester is
designed to test most
network cable wiring. You
can either conduct an auto
or manual test.
21. UTP – Unshielded Twisted
Pair, is a popular type of
cable used in computer
networking that consists of
two shielded wires twisted
around each.