Team Thunderbolt's marketing presentation as presented in SUPRA 2016

1. Team name : Team ThunderBOLT
Team No.: 42
Team Rank: 36
Institute: Northern India Engineering College
City: Delhi

3.  Vehicle Length : 2600mm
 Vehicle Width : 1430mm
 Vehicle Height : 1248mm
 Top Speed : 90km/h
 Transmission : Manual
 Kerb Weight : 220kg
 Maximum Acceleration : 5.274m/s
 Engine Specifications :-
Type : Single Cylinder, 4 Stroke, Twin spark
Displacement : 499cc
Torque : 41.3 Nm @ 4000rpm
Power : 27.2hP @ 5400rpm
Engine Start : Electric
Compression Ratio : 8.5:1

4. SYNCHRON
COMPONENTS
HIGH ACCELERATION
VARIATION
HIGH SPEED
VARIATION
Rims Al-Mg Alloy Steel
Tyres Grooved Slicks
Speedometer Digital Analog
RPM Meter Digital Analog
Fuel Gauge Digital Analog
Sprocket Reduction 3 2.5
Bodyworks Stock Customizable
Driver Equipment 5-Layer Driver Suit 2-Layer Driver Suit
Helmet
Balaclava
Balaclava
Gloves
Helmet
Shoes

5. Synchron
Best in Class
Acceleration
Lightweight
despite a
heavy
transmission
system.
Effortless
steering
system and
smooth
handling
Single
cylinder, fuel
injected
engine
2 Variants-
High speed
and High
Acceleration.

6. Operations administered for the manufacturing of the vehicle included metal cutting, metal
forming, metal shaping, grinding, metal joining by welding processes like arc welding and
TIG welding, metal joining by nuts and bolts, bending, drilling and boring. Wooden fixtures
were prepared, to support the chassis before the tyre-mounting.
The electrical systems of the vehicle required a fair bit of knowledge of the electronics and
electricals.
Components of the vehicle like engine, gearbox, differential was bought from the market and
then mounted on the chassis.
Money Invested in the production of the vehicle was as follows :
Material was pre-ordered in order to compensate for any delay in the ETA of the material
from the factory. Tools were bought beforehand in order to start manufacturing as soon as
the material was delivered. Manufacturing cost mainly consists of the money paid for the
processes which required heavy machinery like bending, manufacturing of hubs,
manufacturing of gears (rack, pinion), sprockets etc.
INTENT AMOUNT
Tool Cost 1,00,000
Manufacturing Cost 2,30,000
Material Cost 1,20,000

8. ESTIMATED START-UP INVESTMENT
Equipment & Facilities Manufacturing Rs 70,00,000
Testing
Assembly
Advertising Rs 1,75,00,000
Stock Rs 2,10,00,000
Fees- Legal, Accounting Rs 17,50,000
3 Months Expenses Rs 1,05,00,000
Miscellaneous Expenses 70,00,000
Quality control and Quality Assurance 87,50,000
START-UP CAPITAL REQUIRED Rs 7,35,00,000