High-technology spraying system to solve the problem of corrosion on tubes and pipes. Uniform application, considerable oil savings, added value to steel pipes.

1. Tube and Pipe

2. We take care of the environment
With our machines we ensure you significant
energy and lubricant savings
Thanks to the controlled dosing system
SIGNIFICANT ADVANTAGE ON ENVIRONMENTAL IMPACT

3. Save Costs effect
Sistemi a
Contatto
Lubrication system advantages
① 70% reduction of consumption
② guarantee antirust protection
③ uniform antirust protection
④ controlled antirust protection
⑤ parts cleaning
⑥ housekeeping
⑦ environmental compliance
⑧ fast pay back of the investment
⑨ health and safety
⑩ waste treatment

4. A SOLUTION
TO CORROSION
FOR

5. Rust preventative oil performance in high
acidic test atmosphere
3 hours
Drip feed Oil Dietronic Application
* Inquiry by our customer based in Turkey

6. Rust preventative oil performance in high
acidic test atmosphere
Drip fed
Oil(one side
only)
Dietronic
Application
6 hours
* Inquiry by our customer based in Turkey

7. Customer’s feedbacks:
Consumption data
Old method: Drip feed of Oil onto tube surface from a
5 Litre container (low flow rate)
Application
method
Oil
consumpti
on (kg)
Production
(Metric
ton)
Productio
n (m²)
Unit
consumpti
on (gr/MT)
Unit
consumptio
n (gr/m²)
Dietronic spray
system
(automatic)
105 467 66,878 224 1.57
Drip feed
manually
107.5 245 36,864 438 2.92
 Oil dispersion increased by 400% with Dietronic system
 Oil consumption(gr/MT) decreased approx. 50% using Dietronic
system
 Oil consumption(gr/m²) decreased approximately 46% using
Dietronic system

8. The features
Advantages and Benefits
- Precise, accurate application ensures minimal waste of oil
- Contains Oil in required area, mist recovered at source
- Total surface application with programmed volume – g/m² control up to 200
M/min
- Individual control of spray nozzles via touch screen interface
- Fluid recovery system including separation and filtration
- Oil volume automatically controlled according to the mill speed
- Application possible for products from 5mm to 400mm with 3 different
machine models

9. SIZES
from 10 mm to 90 mm
from 91 mm to 200 mm

10. The Oil recovery circuit

11. 1° STEP:
oil tank and main control cabinet
All parameters are adjusted through 7”
Oil tank of 30 litre capacity with visual
and electrical sensor for minimum
level.
From this tank we feed volumetric
pump with brushless motor to adjust
the quantity of oil from the nozzles.
touch screen.
•Quantity of oil adjustment in g/m2
•Nozzle activation and deactivation
•Recall of saved projects
•Alarms in case of malfunction

12. 2° STEP:
Spray box
Completely Extractable spray box for easy
Covering the whole surface
!!! Applying the same oil quantity independently
from the speed of the line
maintenance

13. FOCUS: nozzles
Oil flow
Air flow
High pecision dosing system

14. FOCUS

15. 3° STEP:
Filtering recovery system
OIL RECYCLING
•This system serves to automatically recycle the
oversprayed oil, by filtering it and sending it back
to the principal oil tank. It is a perfect solution to
optimize consumption without wasting oil.

16. BACK TO THE START:
re-using oil

17. Thank you for your attention
DieTronic-lubrication system
Italy
www.dietronic.eu
Follow us:

18. Thank you for your attention
Visit our web site
DieTronic S.r.l
Via Cav. Angelo. Manzoni 28,
26866 Sant' Angelo Lodigiano(Lodi) Italy
Tel: +39 0371 210 129
Email: info@dietronic.eu
www.dietronic.eu