1. BENEFITS OF USING COMPLIANCE 2000
Reduces the Respirable and Airborne Dust Levels to Regulatory Compliance Levels and Lower. eg.
<3mg/m3.
Drops the “Fines” down onto the material transfer system instead of letting the particles blow down the
return ventilation or into the atmosphere…which results in more saleable product.
Descales and prevents corrosion and buildup in water lines and pipes and more importantly, keeps the
cooling jackets on Miners’, Shearers and water cooled equipment cleaner.
It wets and soaks into the roof and ribs, reducing “Drop Down Dust” when advancing chocks and
bolters.
When used in drills and bolters, it wets the cuttings, reduces friction and makes the bits last longer.
By spraying thru continuous miners, shearers and crushers, it reduces dust levels and sticking problems
such as belt carry back and ratholing in silos.
Allows the ore and mineral products to absorb the excess water that is lying around in big pools in the
underground works, keeping the floors dry and dust free because of lasting effect.
Breaks the “Static Charge” on conveyor belts to reduce carry-back and clean up/maintenance at transfer
points and underneath belts.
Prevents sticking chutes, ratholing and plugging in stockpile feeder systems by acting as a long lasting
lubricant on the material.
Helps reduce and sometimes totally eliminates stockpile drifting in windy areas.
Can be injected or water infused into Methane Gas Drainage Systems to speed up water injection rates,
drainage cycles and developing panels faster. Added Moisture in the Coal Block increases Stability.
Helps eliminate spontaneous combustion by keeping moisture levels consistent.
Allows operators to reduce water usage by controlling the dust with smaller volumes of water needlessly
wasted under normal spraying to lower dust levels.
Because there are less fine particles floating around, less rock dusting is required in coal mines.
Reduces costs of Chemicals used in the CHPP Circuits.
Moisture levels of saleable product can be adjusted according to contract sale terms for moisture
allotments.
Product is applied with simple automated systems that control addition rates.
Product is safe and easy to handle, ship and use. Non Hazardous.
Product is "Made In Australia", shipped in convenient 1000 kg containers or bulk delivery in tankers.
Product is purchased through Mine Advice Pty. Ltd. and is NOT an Imported or Waste material.
DOWN UNDER PUMPING AND DUST CONTROL SOLUTIONS