2. Industrial Marine and Gas Engine Ltd Team
David Long
Managing Director
Managing director David Long has over 30 years’ experience supplying
gas and diesel engine spare parts throughout the world. David founded
INDUSTRIAL MARINE AND GAS ENGINES in 2002 in his native North
West of England.
He was previously employed by Jenbacher’s UK distributor, ending his
career with the company as a Project Manager for installations. Prior to
this he was involved in the conversion of Ruston diesel engines to run
on hydrogen gas in a purpose built 70,000 sq ft premises and has also
been employed by Ruston themselves.
Lynne Long
Financial Director
Lynne is responsible for all aspects of finance and credit control.
3. Tony McDonagh
Service & Maintenance Manager
Tony is responsible for service and maintenance of engines under service contracts
with Industrial Marine and Gas Engine Ltd. He is also responsible for Motortech
sales and service. Tony was a Chief Engineer in the Royal Navy for 23 years and has
previously worked for Ruston as a senior service engineer looking after diesel gas
and dual fuel engines. Before joining Industrial Marine and Gas Engine Ltd Tony was
Service & Maintenance Manager at a large power generation company responsible
for looking after 98 Jenbacher engines, 26 Caterpillar engines and 6 Deutz engines,
all running on gas, and in total representing over 110 megawatts of power.
Service Staff
Our new Service Department is capable of performing services both in-house and in
situ, whichever suits you best. We offer regular servicing and repairs on these
brands:
Ruston,
Jenbacher,
Caterpillar,
Deutz.
We can undertake work on other engines not listed above so please contact us
should you have any requirements not listed above.
4. Alan Monk
Warehouse Manager
Alan leads our team of four warehouse staff, receiving parts from, and
despatching parts to, all corners of the globe.
David Chadwick
ISO/H&S Manager
David is responsible for all aspects of Health & Safety and upkeep of
INDUSTRIAL MARINE AND GAS ENGINES ISO9001 quality assurance
systems.
Steve Porter
Electrical Manager
Steve is responsible for all sales service and repair of anything electrical
ie motors alternators etc .
5. Manda Hill
Office Supervisor
Manda leads our Administrative Team. When you call our office, you are most
likely to speak to Manda or one of her team: Alex, Emily, Sonya or Mary.
Alexandra Long
Administrative Assistant
Alex deals with supplier and customer orders.
Emily Long
Administrative Assistant
Emily deals with enquiries, quotations and customer orders
Sonya McGuire
Administrative Assistant
Sonya deals with enquiries and quotations.
Mary O’Sullivan
Administrative Assistant
Mary is fluent in Greek, having lived in Greece for 5 years.
6. Steve Tordoff
Branch Manager
Steve is responsible for automotive spare parts sales
Anthony Pennington
Automotive Engineer
Anthony is responsible for technical enquires.
Stewart McGuire
Warehouse Operative
Stewart is responsible for warehouse upkeep and fork lift truck
loading/unloading
Lenny Browitt
Warehouse Operative
Lenny is responsible for warehouse upkeep and fork lift truck
loading/unloading plus van sales.
7. Diesel & Gas Engine Spares | Marine Engine Replacement
Parts | Industrial Marine and Gas Engine Ltd
• Industrial Marine and Gas Engine Ltd are an independent company specialising in the supply of
spares and service for the following diesel and gas engine types, Ruston / English Electric,
Jenbacher, Caterpillar, Mirrlees, Blackstone, Dorman, Waukesha and Deutz.
• Our aim is to provide a professional response to incoming parts enquiries on diesel engines and to
deliver competitively priced components for diesel and gas engines on time.
• Our Experience
• We have a particular experience with the various generations of Ruston / English Electric medium
speed diesel engines and dual fuel diesel engines plus Jenbacher gas engines.
• The provision of spare parts and service for diesel and gas engines which our management team
has effectively been involved with since the mid 1980's.
• The Quality Management System of Industrial Marine and Gas Engine Ltd has been approved by
ISOQAR to the ISO 9001: 2008 Standard.
• Scope of Activities: The supply of gas and diesel engine replacement parts and associated services.
• The Health & Safety system of Industrial Marine and Gas Engine Ltd has been approved by ISOQAR
to the OHSAS 18001: 2007 Standard.
8. Gas Engine Spares
Due to the huge success in supplying spare parts and assemblies for all the leading British
diesel engine types, Industrial Marine and Gas Engine Ltd was inundated with requests to
supply spare parts for use on gas engines.
In response to the requests to produce Gas Engine Spares, Industrial Marine and Gas Engine
Ltd can supply gas engine spare parts suitable for use on Jenbacher, Caterpillar, Waukesha and
Deutz gas engines. Should you have a gas engine not included above then please send us your
enquiries as we feel sure that we will be able to assist you.
Whether your engine is running on natural gas, coke/hydrogen gas, landfill gas, mine gas or
wood gas you can rely on Industrial Marine and Gas Engine Ltd to provide a professional
response to incoming parts enquiries and to deliver competitively priced components on time.
We have particular experience with the various generations of Jenbacher gas engines J312GS,
J316GS, J320GS, J420GS, J612GS, J616GS and J620GS as the Managing Director of Industrial
Marine and Gas Engine Ltd was previously employed by the UK distributor of Jenbacher,
ending his career with the company as a Project Manager on the installation side of the
business. Previous to this he was involved in the conversion of diesel engines to run on
hydrogen gas in a purposely built 70, 000 sq ft premises. In addition to this he travelled the
world on fact finding missions to Canada, Europe, India, and Nigeria to name but a few places.
We hope you can include our company in your supplier listings and favour us with your future
enquires for any gas engine spares. You can be assured of an enthusiastic response and very
competitive prices.
9.
10. Jenbacher Series 3
Maximum efficiency on
Jenbacher series 3 engines is
guaranteed by long service
intervals, low fuel
consumption and excellent
engine design (Jenbacher is a
naturally designed gas engine
and not a converted diesel
engine). Industrial Marine and
Gas Engine Ltd offer quality
and long life whether your
engine is running on natural,
coke, landfill, mine or wood
gas.
11. Jenbacher Series 4
The Series 4 engine has a power
range of 1.5 MW and stands out
because of its high capacity rate
and outstanding fuel and electrical
efficiency. Maximum reliability and
availability is ensured by a unique
designed control and monitoring
system resulting in preventive
maintenance. Industrial Marine
and Gas Engine Ltd parts offer
quality and long life whether your
engine is running on natural, coke,
landfill, mine or wood gas.
12. Jenbacher Series 6
The Series 6 engine offers excellent
reliability in the 1.7 to 3 MW
power range. High capacity rate
and low installation costs are an
asset of this engine which has a
speed of 1500 RPM. Maximum
efficiency with low emissions are
achieved by the design of its pre
combustion chamber. The first
major service is at 60000 hours due
to the excellent design of this
engine. Industrial Marine and Gas
Engine Ltd offer quality and long
life whether your engine is running
on natural, coke, landfill, mine or
wood gas.
19. Jenbacher Spark Plugs
INDUSTRIAL MARINE AND GAS ENGINES supply the full range of
Jenbacher spark plugs suitable for Jenbacher Series 2 & 3 series
engines
Jenbacher 208
Jenbacher 212
Jenbacher 216
Jenbacher 312
Jenbacher 316
Jenbacher 320
Maximum efficiency on Jenbacher Series 3 engines is guaranteed
by long service intervals, low fuel consumption and excellent
engine design (Jenbacher is a naturally designed gas engine, not
a converted diesel engine).
Features & Benefits
Two-stage mixture cooling gives greater flexibility.
Mixture at low gas pressures due to specially designed
supercharger .
Extreme operating conditions balanced by turbocharger bypass
Fits neatly into a 40-foot container
20. We supply the full range of Jenbacher spark plugs suitable for
Jenbacher Series 4
Jenbacher 420
The Jenbacher Series 4 engine has a power range of 1.5 MW and
impresses with its high capacity rate and outstanding fuel and electrical
efficiency. Maximum reliability and availability is ensured by a unique
designed control and monitoring system resulting in preventive
maintenance.
Features & Benefits
High efficiency
High-tech components maximise reliability
Maximum reliability due to improved component design
Engine designed with servicing in mind
Operation at higher air intake temperature and altitude is possible due to
higher rated turbocharger
21. We supply the full range of Jenbacher spark plugs suitable for Jenbacher
Series 6
Jenbacher 612
Jenbacher 616
Jenbacher 620
Jenbacher 624
The Jenbacher Series 6 engine offers excellent reliability in the 1.7 to 3
MW power range. High capacity rate and low installation costs are an
asset of this engine which has a speed of 1500 RPM. Maximum efficiency
with low emissions is achieved by the design of its pre-combustion
chamber. The first major service is at 60,000 hours.
Features & Benefits
Extreme operating conditions balanced by turbocharger bypass
High output density at 1500 rpm
Long cylinder head life is guaranteed by dry exhaust manifold
Maximum efficiency is ensured by specially designed pre-chamber
combustion
Knocking control offers the best protection
23. Champion pioneered the use of iridium in aviation and industrial spark
plugs in the early 1970s. Now iridium, which has a stabilising effect on
ignition voltage and excellent wear characteristics, is quickly becoming the
technology of choice for engine manufacturers worldwide.
Champion iridium spark plugs offer maximum performance regardless of
engine or ignition type. Each plug has an extremely fine-wire iridium
center electrode that is a laser-locked™ to the centre electrode, and a
platinum V-trimmed ground electrode to ensure the longest life and
greatest erosion resistance. Champion iridium plugs come with the Heat-
Active alloy to reach operating temperatures quickly and maintain stable
operating temperatures under varying engine loads.
Champion iridium plugs deliver a consistently focused spark that provides
the greatest engine performance regardless of engine type or ignition
system.
Champion Platinum Power Spark Plugs
Champion Platinum Power spark plugs use a platinum pad welded to a
nickel alloy centre electrode for long life. The advantage of this design is
that platinum has extremely good wear characteristics and can reduce gap
growth.
24. Because Champion Platinum Power plugs maintain proper gaps, the
voltage needed to fire the spark plug remains consistent, reducing
the chance of misfire. Spark scavenging is kept to a minimum by
combining a thin-wire centre electrode with a V-trimmed ground
electrode.
The electrodes use the Heat-Active ¢ alloy to reach operating
temperatures quickly and maintain stable operating temperatures
under varying engine loads.
Platinum Power plugs can be used as replacements for engines
originally equipped with standard nickel/copper spark plugs. They
can also be used as a direct replacement on many late-model OE
coil-on-plug engines.
25. Champion Double Platinum Power Spark Plugs
Champion Double-Platinum Power spark plugs have platinum on both
the centre and ground electrodes. The centre electrode is platinum
fine wire that is riveted onto the nickel alloy centre electrode. The
ground electrode has a platinum pad welded to its surface.
Using platinum on both the centre and ground electrodes provides
longer life and minimal wear. In addition, Champion™ fine-wire and V-
trimmed electrodes create sharper spark focus than conventional
plugs. The electrodes on these plugs use the Heat-Active alloy to reach
operating temperatures quickly and maintain stable operating
temperatures under varying engine loads.
This plug design is widely used for a distributorless ignition with a
waste spark design.
28. Service Department
INDUSTRIAL MARINE AND GAS ENGINES specialises in servicing and
supplying spare parts for a huge range of diesel and gas engine
types.
INDUSTRIAL MARINE AND GAS ENGINES Ltd are an independent
company specialising in the service and maintenance of
Combined Heat and Power (CHP) systems especially for
Jenbacher, Caterpillar, and Deutz gas engines.
INDUSTRIAL MARINE AND GAS ENGINES has become renowned
for excellence in CHP maintenance due to the vast experience of
our mechanical and electrical engineers.
CHP is the simultaneous production of heat and power from a
single fuel source.
CHP improves operating profits through reduced energy costs
and reduced carbon emissions, and offers standby generation
and greater energy flexibility. CHP has long life.
Our Service Department aims is to maximise our customer’s
energy savings and plant availability through reduced operating
costs and increased reliability.
29. Factory Reconditioning Service
We also offer a factory reconditioning service for those
components and assemblies that can be reliably and
economically recycled, for example: Connecting Rods, Cylinder
Heads etc.
And according to specific customer demand we can supply
used/refurbished complete engines and major engine
components.
All reconditioned assemblies, sub-assemblies or components
can be delivered with Lloyds or equal inspection certification
as appropriate.
37. Why choose Industrial Marine and Gas Engine Ltd for all of your Jenbacher
requirements?
Service Exchange parts or reconditioning of your existing parts
including:
CYLINDR HEADS
CONN RODS
THROTLE VALVES
STARTER MOTORS
OIL PUMPS
WATER PUMPS
VIBRATION DAMPERS
SHORT BLOCKS
EXCHANGE ENGINES
38. Quality
ISO9001 approved
Same quality as engine manufacturer
Spare Parts manufactured in UK/EC
Spare Parts inspection before shipment
It is Industrial Marine And Gas Engine Ltd policy to supply original equipment manufactured (OEM) spare parts
and a mixture of genuine spare parts from the engine manufacturer. If it is not possible to get genuine/OEM spare
parts then Industrial Marine And Gas Engine Ltd will supply their own manufactured spare parts which will be
inspected, tested and unless otherwise stated, conform in all aspects with the requirements of the contract or
order. All parts will be manufactured by leading component suppliers in accordance with the relevant British or
European standards, and will be fully guaranteed for 12 months in respect of design, materials and workmanship.
In the unlikely event of a warranty claim the part in question will immediately be replaced free of charge.
39. Warranty & Guarantee
Spare parts carry Industrial Marine And Gas Engine Ltd 12 month warranty which is more
than engine manufacturers standard warranty on new parts.
Industrial Marine And Gas Engine Ltd give warranty/guarantee that the equipment/spares
supplied are new in accordance with the specification applicable to the respective
machine/equipment. The material used is in accordance with latest appropriate standard
specification and complete of good workmanship throughout and also inter-changeable with
originally/previously fitted respective equipment/spares.
Industrial Marine And Gas Engine Ltd also give warranty/guarantee that the
equipment/spares supplied will fit in the respective place of the machinery/equipment.
If any defect/discrepancy arises during fitting in respective machinery/equipment after
receipt of equipment’s/spares by consignee/end user, the supply of that part will be replaced
free of charge within the minimum amount of time after establishment of discrepancies.
Industrial Marine And Gas Engine Ltd will also cover warranty of 12 (Twelve) months from the
date of acceptance of the equipment/spares by end user
