Instructions- Write a program that will read in 3 integers from a file.pdf

•

0 likes•2 views

Instructions: Write a program that will read in 3 integers from a file named input.txt. Take the three numbers and pass them to a method that will find the maximum value of the 3 numbers and return the value back to main(). Then pass the 3 integers to a min method that will return the minimum value back to main(). Finally print out "For the set (#, #, #) the maximum value is #, and # is the minimum value." where # are the actual values for the set, the max, and the min. You are not allowed to use any of the Math libraries (so no Math.max() and Math.min()). Please note that methods must be used. Input Type & Format The input will come in the form of a file named input.txt The file will contain a set of 3 integers. Output Examples: If input.txt is "1 2 3" the output would be For the set (1, 2, 3) the maximum value is 3, and 1 is the minimum value. Acceptable imports: java.util.Scanner java.io.* Again no use of the Math libraries.

Education

Similar to Instructions- Write a program that will read in 3 integers from a file.pdf

cpphtp4_PPT_03.ppt

Suleman Khan

Python - Data Collection

JoseTanJr

python1.ppt

arivukarasi2

Array assignment

Ahmad Kamal

Given below is the completed code along with comments. Output of the program is shown at the end. You will need to create an input file containing multiple lines of input as specified in the question. I have given a sample input file with just 1 line of input. Please do rate the answer if it helped. Thank you very much. #include /* extractBits extracts the specified number of bits starting specified start location from left. bit numbering starts with 0 from left. len specifies the number of bits to extract. So extract leftmost 4 bits of a number n, the call should be extractBits(n, 0, 4). Here start = 0 means the 0th bit from left. Similarly to extract bit 16 through 20 (i.e 5 bits), we use extractBits(n, 16, 5) The way this function works is - First calculate the remaining number of bits on the rightside . Since int takes 32 bits, we subtract (start+len) from 32 to get remaining bits on right. it first clears all the bits upto starting bit by left shift << by start bits. Now we shift back the same number of times to right + */ int extractBits(unsigned n, int start, int len) { int rightRemaining = 32 - (start + len); //shift left and then right by start no. of bits clears leftside bits n = (n << start) >> start; //now shifting by remaining number of bits on right will extract only needed bits n = n >> rightRemaining; return n; } int main (int argc, char *argv[]) { // Get the filename to open, then open the file. If we can\'t // open the file, complain and quit. char *filename; // *** Your Code *** if argv[1] exists, set filename to it, // otherwise set filename to \"Lab3_data.txt\"; if(argv[1] != NULL) filename = argv[1]; else filename = \"Lab3_data.txt\"; // Open the file; if opening fails, say so and return 1. // otherwise say what file we\'re reading from. FILE *in_file; in_file = fopen(filename, \"r\"); // NULL if the open failed // *** Your Code *** if in_file is NULL, complain and quit // otherwise say that we\'ve opened the filename if (in_file == NULL){ printf(\"Couldn\'t open file %s\ \", filename); return 1; } printf(\"Opened file %s for reading...\ \", filename); // Repeatedly read and process each line of the file. The // line should have a hex integer and two integer lengths. int val, len1, len2, len3; int nbr_vals_on_line = fscanf(in_file, \"%x %d %d\", &val, &len1, &len2); // Read until we hit end-of-file or a line without the 3 values. while (nbr_vals_on_line == 3) { // We\'re going to break up the value into bitstrings of // length len1, len2, and len3 (going left-to-right). // The user gives us len1 and len2, and we calculate // len3 = the remainder of the 32 bits of value. // All three lengths should be > 0, else we complain // and go onto the next line. // len3 = 32 - (len1 + len2); // *** Your Code*** // if any of the lengths aren\'t > 0, // print out the value and the lengths and complain // about the lengths not all being positive if(len1 <= 0 || len2 <= 0 || len3 <= 0) { printf(\"Invalid lengths : len1=%d, len2=%d, len.

Given below is the completed code along with comments. Output of the.pdf

aparnacollection

Cpphtp4 ppt 03

sanya6900

Getting Started Create a class called Lab8. Use the same setup for setting up your class and main method as you did for the previous assignments. Be sure to name your file Lab8.java. Additionally, make another file called Arrays.java. This file will be an object, so simply start it off by declaring an Arrays class. You can copy the following skeleton and fill in the appropriate code below each of the comments: public class Arrays { / Instance Variables // Constructors // findMin 1 // findMax // calcSum // calcAverage // toString } Task Overview Your task for this lab is to create a class called Arrays with some array processing methods. This class will maintain an array and the number of elements present in it. Additionally, methods will be available to display the current min and max elements along with the average of all of them. Finally, a toString() method will be available to cleanly display all the array elements. Finally, you will write a simple driver class to test out the above Arrays class. Part 1: Instance Variables for Arrays The first thing to do for the Arrays class is to set up its instance variables. Declare the following (private) instance variables: • An int array called array ? this will be the array we will be writing methods for. • An int called count - this represents the number of valid elements in the array. Part 2: Constructors for Arrays The Arrays class will have two constructors. The first constructor takes the maximum size of the array as input as a parameter and initializes the array instance variable appropriately. It also sets count to size. Finally, it will initialize all of the array elements to some values between 0 and 10, inclusive. To create this constructor, follow these steps: • Import java.util.Random to make use of the random number generator. • Create a constructor with the following header: public Arrays(int size) • Initialize your array variable and set its size to size (see the chart on page 252 for reference on initializing arrays). Be very careful that you are setting the value of your array instance variable, as opposed to creating a new variable called array. • Set the value of the count variable to size because we will be populating the entire array. • Copy the following code to the constructor in order to generate random values between 0 and 10, inclusive: Random rand = new Random(); for (int i = 0; i < count; i++) { array[i] = (rand.nextInt(10)); } Next, create another constructor with the following header: public Arrays(int[] arr). This constructor will initialize the class by using the passed arr argument in order to fill its instance variables. The following things need to be done inside of this constructor: • Set the array variable equal to arr. • Set the count variable equal to the length of the array. Part 3: Displaying the Output findMin() The first method of this class will search the array for the minimum element. Copy the following code for the findMin method. Note how the count i.

Getting StartedCreate a class called Lab8. Use the same setup for .pdf

info309708

C programming session 05

Dushmanta Nath

Chap08

Syam Kumar

Write a method called uniqueNumbers that takes an int array as parameter, and returns a different int array, which only contains the list of unique numbers in the original array. Hint: Use the isPresent method defined below to accomplish your here is the code we need to add too Solution solution package com.mt.classes; import java.util.ArrayList; import java.util.List; public class Lab8e { public static void main(String[] args) { int[] numbers = new int[20]; // Generate random numbers between 0 and 99 and fill up the array for (int i = 0; i < numbers.length; i++) { numbers[i] = (int) (Math.random() * 50); } System.out.println(\"The list is:\"); printNumbers(numbers); // Task 1 System.out.println(\"The smallest number in the list is \" + smallestNumber(numbers)); // Task 2 System.out.println(\"The largest number in the list is \" + largestNumber(numbers)); // Task 3 System.out.println(\"The average of numbers in the list is \" + averageOfNumbers(numbers)); // Task 4: Extra Credit. Uncomment the following // two lines if you complete this task. System.out.println(\"The list of unique numbers is:\"); uniqueNumbers(numbers); } private static void uniqueNumbers(int[] numbers) { for (int i = 0; i < numbers.length; i++) { boolean isDuplicate = false; for (int j = 0; j < i; j++) { if (numbers[i] == numbers[j]) { isDuplicate = true; break; } } if (!isDuplicate) { System.out.print(numbers[i] + \" \"); } } } public static void printNumbers(int[] list) { for (int i = 0; i < list.length; i++) { System.out.print(list[i] + \" \"); } System.out.println(); } // 1. Write a method called smallestNumber that // takes an int array as parameter, and returns the // smallest number public static int smallestNumber(int[] list) { int small = 100; for (int i = 0; i < list.length; i++) { if (list[i] < small) { small = list[i]; } } return small; } // 2. Write a method called largestNumber that // takes an int array as parameter, and returns the // largest number public static int largestNumber(int[] list) { int large = 0; for (int i = 0; i < list.length; i++) { if (list[i] > large) { large = list[i]; } } return large; } // 3. Write a method called averageOfNumbers that // takes an int array as parameter, and returns the // average of the numbers public static double averageOfNumbers(int[] list) { double average = 0.0; for (int i = 0; i < list.length; i++) { average = average + list[i]; } average = average / list.length; return average; } public static boolean isPresent(int[] list, int target) { boolean found = false; for (int i = 0; i < list.length && !found && list[i] != 0; i++) { if (list[i] == target) { found = true; } } return found; } } output The list is: 16 14 11 31 7 8 18 49 27 43 9 39 38 18 6 16 8 30 32 15 The smallest number in the list is 6 The largest number in the list is 49 The average of numbers in the list is 21.75 The list of unique numbers is: 16 14 11 31 7 8 18 49 27 43 9 39 38 6 30 32 15.

Write a method called uniqueNumbers that takes an int array as param.pdf

fashioncollection2

Hey i have attached the required file for my assignment. and additionally i have also mentioned the points of assignments below. this one is based on this concept. Lab 4 (Collection Framework, Exception, IO Handling, Generic method and GUI Programming) NOTE: You should properly format your source code files for better readability and write appropriate comments in the code. Exercise 1 [10 points]: Write a program that asks a user for a file name and prints the number of characters, words (separated by whitespace), and lines in that file. Then, it prints the frequency of each word (case insensitive) containing in the file (Test1.txt); Your program should handle exceptions related to file opening and reading from the file. This is a test this Hi there hi hi hi Output at the console: Number of characters: 35 Number of words: 10 Number of lines: 2 Data written to the file (Test1.txt): this 2 is 1 a 1 test 1 hi 4 there 1 Hint: you may use a HashMap to store and count the frequency of the words in the file. Exercise 2 [20 points]: Your task is to write a program that uses a textfile containing any number of lines of double values as input. Each line in the file is supposed to have no more than 15 values on it. If the file exists and each line in the file does in fact contain 15 or fewer double values, then the program processes and reports on each line in turn by displaying its line number, the number of values on that line, and the range of values on the line. But, as you know, things are not always as they seem, or as they are supposed to be. For example, the file your program is looking for may not be there, there may be no double values at all on some lines, some lines may contain more values than the allowed maximum of 15, and some lines may contain "values" that aren't even doubles (i.e., badly formatted "invalid" double values). The program must recognize and respond appropriately to each of these problems. Note: You must implement exception handling. Not only am I requiring it, but Java itself will also require it since you will have to use Java resources that force you to deal with the IOException. In addition to this exception, you are also required to handle the ArrayIndexOutOfBounds and the NumberFormatException at appropriate points in your program. This program reads in, from the command line, the name of a textfile containing any number of lines of doubles and then processes each line in turn. Processing a line means computing and then reporting, for that line, its line number, along with the range of values on the line. The program can recognize a number of problems that may occur when trying to process such a file. First, the file itself may not be present. If so, the following message is displayed (the first line comes from the system, the second from the program itself): filename.ext (The system cannot find the file specified) Program will now terminate. ...

Hey i have attached the required file for my assignment.and addi

sorayan5ywschuit

02 c++ Array Pointer

Tareq Hasan

Python cheat-sheet

srinivasanr281952

Homework: Homework 7 Save Score: 0 of 1 pt HW Score: 5.19%, 0.78 of 15 pts 4 of 15 (1 complete) E Question Help Problem 17.3 A new aircraft control system is being designed that must be 98.0% reliable. This system consists of three components in series. f all three of the components are to have the same level of reliability, then the level of reliability required for each component enter your response as a percentage rounded to two decimal places). Solution Given that new aircraft system is being must be = 98.0% reliable let x ,y ,z are three reliable components of same reliabulity. then x = y= z so, x+y+z= 98 => x+x+x = 98 => 3x = 98 => x= 98/3 => x =32.66.

I am trying to create a python script and need a little help.Im tr.pdf

arumugambags

FSTREAM,ASSERT LIBRARY & CTYPE LIBRARY.

Meghaj Mallick

Similar to Instructions- Write a program that will read in 3 integers from a file.pdf (15)

cpphtp4_PPT_03.ppt

Python - Data Collection

python1.ppt

Array assignment

Given below is the completed code along with comments. Output of the.pdf

Cpphtp4 ppt 03

Getting StartedCreate a class called Lab8. Use the same setup for .pdf

C programming session 05

Chap08

Write a method called uniqueNumbers that takes an int array as param.pdf

Hey i have attached the required file for my assignment.and addi

02 c++ Array Pointer

Python cheat-sheet

I am trying to create a python script and need a little help.Im tr.pdf

FSTREAM,ASSERT LIBRARY & CTYPE LIBRARY.

More from ColinjSWDavidsonn

In Chapter 8 you were introduced to the water-soluble vitamins, including vitamin C , the eight B vitamins, and the vitaminlike nutrient choline. Like the fat-soluble vitamins, these nutrients are organic and needed in very small amounts. The primary role of B vitamins is as , with most playing a role in B vitamins do not provide energy, but play an important role in energy transformation. As , B vitamins form an active complex with enzymes to a chemical reaction..

In Chapter 8 you were introduced to the water-soluble vitamins- includ.pdf

ColinjSWDavidsonn

In February 2020- the Bureau of Labor Statistics calculated the unempl.pdf

ColinjSWDavidsonn

In relation to the results of the HEBP2 gene, what role does the heme group play in the plant? Is the heme group present in all eukaryotes? Can we trust that plant and human genes are homologous? Is it possible that the similarity in the sequences is due to parallel evolution? A.thaliana AT1G17100 R.norvegicus Hebp2 C.Iupus HEBP2 H.sapiens HEBP2 omoloGene:8634. Gene conserved in Eukaryota Genes Proteins Genes identified as putative homologs of one another during Proteins used in sequence comparisons and their conserved the construction of HomoloGene. domain architectures..

In relation to the results of the HEBP2 gene- what role does the heme.pdf

ColinjSWDavidsonn

In Python: A palindrome is a word or a phrase that is the same when read both forward and backward. Examples are: "bob," "sees," or "never odd or even" (ignoring spaces). Write a program whose input is a word or phrase, and that outputs whether the input is a palindrome. Input: Bob output: palindrome: bob output: not a palindrome: bobby input: dr awkward output: not a palindrome: dr awkward here is my code but it is not removing the white spaces from the string. Could you please tell me why.

In Python- A palindrome is a word or a phrase that is the same when re.pdf

ColinjSWDavidsonn

In July of 2015 Dr. Ronald Ware executed to United Capital Source a note in the amount of $150,000 with an accompanying security agreement covering the following property: "All equipment of the debtor of every description used or useful in the conduct of the debtor's business, now or hereafter existing or acquired . . . The listed assets held for collateral are presently located at 8950 Knolls Road, Myrtle Beach, South Carolina." In July of 2017 Dr. Ware moved some of his equipment to a new office owned by Jackson Properties, Inc. in Charleston, South Carolina. To finance this move, Dr. Ware procured a loan from a Charleston bank, and Jackson co-signed the note. The Charleston bank prepared a security agreement covering the same equipment as the 2015 security agreement. In September of 2017, Dr. Ware defaulted on the first note and absconded with the equipment from the Charleston office. Jackson received an insurance payment as cash proceeds from the missing equipment. United Capital Source claimed priority rights to the missing equipment or the insurance proceeds even though the equipment had been moved to Charleston. Do you think United Capital Source recovered this insurance money from Jackson? Why or why not? (Make sure your argument is supported by applicable law)..

In July of 2015 Dr- Ronald Ware executed to United Capital Source a no.pdf

ColinjSWDavidsonn

In Java; Input is from a file. The input is all doubles. You are to input these doubles 2 at a time (the length and width), create a Rectangle and determine if it has the largest area. Output the Rectangle with the largest area. import java.io.File; import java.io.FileNotFoundException; import java.util.Scanner; public class Lab8Num2 { public static void main(String[] args) { File inFile = new File("lab8.in"); Scanner fileInput = null; try { fileInput = new Scanner(inFile); } catch (FileNotFoundException ex) { } //get first Rectangle and make it the biggest; //do NOT put into an arrayList and sort. while () { //get more data from file //make Rectangle //see if it is bigger than biggest so far //if so, it is the new biggest } System.out.println("The biggest rectangle was " + biggest); } } public class Rectangle { private double length, width; public Rectangle() { length=0; width=0; } public Rectangle(double len, double wid) { length=len; width=wid; } public double getLength() { return length; } public void setLength(double length) { this.length = length; } public double getWidth() { return width; } public void setWidth(double width) { this.width = width; } public double area() { return length*width; } public double perimeter() { return 2*(length+width); } public String toString() { return "Length: " + length + " Width: " + width; } public int compareTo(Rectangle r) { } } .

In Java- Input is from a file- The input is all doubles- You are to in.pdf

ColinjSWDavidsonn

In Java: Get doubles from input file. Output the biggest import java.io.File; import java.io.FileNotFoundException; import java.util.Scanner; public class Lab8Num1 { public static void main(String[] args) { File inFile = new File("lab8.in"); Scanner fileInput = null; try { fileInput = new Scanner(inFile); } catch (FileNotFoundException ex) { } //get first number and make it the biggest; //loop through the file //getting doubles and comparing with current "biggest" System.out.println("The biggest number was " + biggest); } }.

In Java- Get doubles from input file- Output the biggest import java-i.pdf

ColinjSWDavidsonn

IN java A chessboard has alternating black and white squares- The firs.pdf

ColinjSWDavidsonn

In a particular hospital- 6 newborn babies were delivered yesterday- H.pdf

ColinjSWDavidsonn

In Chapter 8 you were introduced to the water-soluble vitamins, including vitamin C , the eight B vitamins, and the vitaminlike nutrient choline. Like the fat-soluble vitamins, these nutrients are organic and needed in very small amounts. Inadequate folate and vitamin B 12 play a role in megaloblastic anemia. Arrange the following steps in the development of megaloblastic anemia from first to last. Last step.

In Chapter 8 you were introduced to the water-soluble vitamins- includ (1).pdf

ColinjSWDavidsonn

In Chapter 12, you learned about the distribution and marketing channels used to distribute products in various environments. Based on that information, identify the four retail market expansion strategies presented in the course text. Use the list below to complete your assignment. First, list the factors that determine the appropriate mode for expansion. Next, determine which mode would be appropriate for Lucchese (a high-end western boot company) if entering Spain. Discuss cultural differences and the difficulty of market entry to support your recommended mode..

In Chapter 12- you learned about the distribution and marketing channe.pdf

ColinjSWDavidsonn

In detail- please discuss the technical structure of the Customs Tarif.pdf

ColinjSWDavidsonn

In an experiment of rolling a die twce Lel x be random variable to be.pdf

ColinjSWDavidsonn

In a school- 16- of the students have seen a school counselor about an.pdf

ColinjSWDavidsonn

In a Poisson distribution- -2-00- (Round your answers to 4 decimal pla.pdf

ColinjSWDavidsonn

It is a simple program that that parses a simple expression grammar. The grammar: P ---> E '$' E ---> T { ('+' '-') T } T ---> F { ('/' '*') F } F ---> '(' E ')' | digit | letter or in BNF P ---> E '$' E ---> E + T | E - T | T T ---> T * F | T / F | F F ---> '(' E ')' | digit | letter Your task is to modify the code to add exponentiation and modulus operations To add these functions we will change the Grammar to be the following: P ---> E '$' E ---> E + T | E - T | T T ---> T * F | T / F | F F ---> P ^ F | P P ---> '(' E ')' | digit | letter The grammars are very similar but the new grammar but has a a minor change to TERM for modulus a rewrite of FACTOR to handle exponent operation and a completely new method called PRIMARY that does what the old FACTOR did To add the modulus you will need to add the modulus operator '%' character To add the power (exponentiation) operation you will need to again add a character ('^') and then rewrite the FACTOR NEW method for PRIMARY Comment your code. You should add a comment ALL the line you add or modify (required) You must use the given code and you are to change as little as possible (don't rewrite the whole thing or add any additional functionality) ______________________________________________________________________________________________________________________________________.

It is a simple program that that parses a simple expression grammar- T.pdf

ColinjSWDavidsonn

it ingents ford It tacks cell watlls Question 4 Bictaterally symimetri.pdf

ColinjSWDavidsonn

Is this x-lined dominant or recessive inheritance- Write all possible.pdf

ColinjSWDavidsonn

Is the study experimental- observational- or niether- 7) A political p.pdf

ColinjSWDavidsonn

Is Ethnicity a Foreign Concept-.pdf

ColinjSWDavidsonn

More from ColinjSWDavidsonn (20)