1. brewerhendley.com
CONTACT US 803-972-0635 (C)
803-775-7723 (O)
chuckh@brewerhendley.com
207 N Forest Hills School Rd.
Marshville, NC 28103
CHUCK HINDS ICML MLA II
PROFESSIONAL SERVICES
Total Lubricant Diagnostics & Maintenance Services
Brewer-Hendley is a lubricants and fuels distributor based in the Carolinas. We aim to
provide the best service and products to our customer to make their business grow.
Lubricant Diagnostics &
Maintenance
Onsite Oil Reclamation
- Turbine
- Hydraulic Oil
- Gear Oil
Oil Flushing
Oil System Pipe Flushing
Industrial Oil & Fluid Analysis
TECHNICAL SALES MANAGER
Services we offer:
2. brewerhendley.com
CONTACT US 803-972-0635 (C)
803-775-7723 (O)
chuckh@brewerhendley.com
207 N Forest Hills School Rd.
Marshville, NC 28103
CHUCK HINDS ICML MLA II
ON-SITE OIL RECLAMATION SERVICE
Vacuum Dehydration
To maximize the life of your oil, we identify and remove all harmful contaminants. Brewer-
Hendley Professional Services uses a vacuum dehydration process to achieve pure oil
quality. We never remove oil additives with our process. Instead, we remove volatile
contaminants such as water. Our water extraction process offers many rewarding results:
- Reduces premature oxidation
- Improves bearing life
- Prevents corrosion of machine components
- Reduces premature failure and extensive wear due to reduced lubricating ability
Ultra-Fine Filtration
During the ultra-fine filtration process, we use state of the art filtration technology to
remove sub-micron particles from oil. Benefits of ultra-fine filtration include:
- Extended pump and servo valve life
- Significantly reduces hydraulic component surface abrasion, which can cause
improper sealing and poor performance.
- Substantially increases the life of hydraulic and lubrication systems.
- All quality assured, we guarantee our processed oil will meet and even exceed
ANY equipment manufacturer specification for ISO cleanliness.
Turbine Oil Reclamation
Our turbine oil purification procedures are in accordance with ASTM D6439-11 and meet
the approval of Mobil, Chevron, and Citgo manufacturing engineers.
High levels of water and particulate contamination can be detrimental to the life of a
turbine bearing. Our vacuum dehydration oil purification systems (VDOPS) pre-equipped
with both an inline particle counter and moisture meter, to ensure reclaimed oil quality.
Through vacuum dehydration we are able to remove emulsified water levels below 40
parts per million which can give bearings up to an additional 200% life and perfomance.
TECHNICAL SALES MANAGER
3. brewerhendley.com
CONTACT US 803-972-0635 (C)
803-775-7723 (O)
chuckh@brewerhendley.com
207 N Forest Hills School Rd.
Marshville, NC 28103
CHUCK HINDS ICML MLA II
ON-SITE OIL RECLAMATION SERVICE
Turbine Oil Reclamation Continued...
Our kidney loop flushing service allows us to connect directly to the turbine lube oil
reservoir and flush the system while it continues to operate, or we can provide certified
clean tanks to transfer oil for reclamation during reservoir cleaning and maintenance.
Our reclamation not only provides a cost saving benefit, but also reduces unit downtime
while increasing fluid longevity.
Hydraulic Oil Reclamation
Ourserviceiscateredtoreclaminghydraulicoilwheretheremovalofemulsifiedwaterand
dirt contamination is critical. The reclamed hydraulic oil will exceed servo valve cleanliness
specifications.
In most cases where a heat exchanger ruptures and floods a hydraulic oil reservoir with
water, it may take 4-6 oil changes to completely remove water from a system, which can
become costly. Our kidney loop flushing service is a cost effective solution. Our system
not only removes free water from the reservoir but also removes emulsified water from oil
that may reside within system lines and cavities. This service can be performed while the
machine continues to operate, therefore eliminating downtime.
Gear Oil Reclamation
Our service removes dirt and water contamination from gear oil as it collects in sumps and
reservoirs.
TECHNICAL SALES MANAGER
AfterBefore
4. brewerhendley.com
CONTACT US 803-972-0635 (C)
803-775-7723 (O)
chuckh@brewerhendley.com
207 N Forest Hills School Rd.
Marshville, NC 28103
CHUCK HINDS ICML MLA II
OIL FLUSHING SERVICE
Dirt contamination can also become an issue within reservoirs. Our flush service targets
and removes these contaminants restoring the system back to the recommended ISO
cleanliness level. Our units are equipped with on-site oil analysis equipment, therefore
we can continuously monitor the oil’s condition and keep customers updated on a regular
basis. We also use state of the art moisture sensory technology that aids our ability to
remove moisture levels approximately 80% less than the amount found in standard
virgin fluids. Lower moisture levels in fluids can promote longer bearing life and hinder
oxidation from forming within the fluid.
On-Site Oil Flushing Services Meet the Specific Needs of Each Customer.
In situations where a heat exchanger ruptures and floods an oil system with water it can
become costly to drain and refill a reservoir until the oil clarity has returned. Industrial
experts estimate it can take 5-6 drain and refill intervals to return the system to a
suitable condition. Our water removal service reduces the cost of this process.
Incorporates:
High Velocity Oil Flushing
Hot Oil Flushing
No need to worry about machine downtime.
Our on-site oil flushing service can be performed while the unit is in operation. By
keeping the unit in operation while our flush commences, the entire system is flushed
of water/dirt contamination. This eliminates the risk of hidden contaminants that may
reside within oil lines and other piping components.
TECHNICAL SALES MANAGER
5. brewerhendley.com
CONTACT US 803-972-0635 (C)
803-775-7723 (O)
chuckh@brewerhendley.com
207 N Forest Hills School Rd.
Marshville, NC 28103
CHUCK HINDS ICML MLA II
OIL SYSTEM PIPE FLUSHING SERVICE
Many engineering and industrial contracting firms provide full oil system piping installations
that require pipe and reservoir flushing services before the unit is, certified operational.
Running new fluid through piping that has not been cleaned/flushed properly may increase
the chance of component failures during the initial startup. With our hydraulic piping and
system flushing services our operators are able to connect to individual pieces of piping,
partially connected piping, and directly to the hydraulic reservoir. After the cleanliness levels
have been met our operators will provide a certificate of analysis on-site.
High Velocity Oil Flushing
We provide a high velocity hot oil flushing services that ensures the internal workings of
the newly installed pipe will meet the established cleanliness requirements needed for new
systems.
On-Site Fluid Analysis
ThroughtheuseofportableISOcalibratedparticlecountingequipmentandmoisturesensors
ouroperatorsareabletocontinuouslymonitorthefluidcleanlinesson-siteandensurethatall
piping and/or reservoirs have been flushed to the desired target ISO cleanliness level.
Chemical Flushing Option
We also offer a biodegradable flushing solution designed to remove free welding slag, dirt,
grease,etc.frominnerpipecavitiespriortosystemstartups.Ourhighvelocityflushingservices
allows us to achieve turbulent conditions within the piping in order to remove contaminants.
Pipingisalwaysflushedwithnewhydraulicfluidinordertoremovealltheresidualbiodegradable
flushing solution and to achieve the desired target ISO cleanliness level.
Full Report
After each new hydraulic system installation flushing service, we issue a full, detailed report
outliningthemeasurestakentoproperlyflusheachsectionofthesystem.Thisreportincludes
additionalindependentISOlaboratorycerticficationasameanstoverifythatallinnerworkings
of the system reservoir and piping have been efficiently cleaned.
TECHNICAL SALES MANAGER
6. brewerhendley.com
CONTACT US 803-972-0635 (C)
803-775-7723 (O)
chuckh@brewerhendley.com
207 N Forest Hills School Rd.
Marshville, NC 28103
CHUCK HINDS ICML MLA II
INDUSTRIAL OIL AND FLUID ANALYSIS
Our Oil and Fluid Analysis services have helped every level of industry grow accustomed to
substantial returns from a small investment.
Oil and Fluid Analysis is vital for industrial equipment utilized in a wide array of industries
which are expected to maintain a high level of production. Meeting this demand is dependent
on reliable, well-maintained equipment.
Succcessfully monitoring fluid condition with laboratory oil and fluid analysis will ensure
equipment uptime and minimize maintenance costs. Our industrial oil and fluid testing
encompasses all fluid conditions for a variety of applications.
Power Generation
Turbine oil analysis has been identified by the power generation industry as a critical
monitoring process. It has long recognized that continually monitoring these fluids is
necessary to ensuring long, trouble-free operation. Routinely evaluating and analysing
oil degradation and wear allows plant maintenance and reliability personnel to execute a
cost-effective, preventative maintenance program.
Machine and Building Maintenance
We offer a full range of oil and fluid analysis services and oil condition monitoring (OCM)
for effectively monitoring critical component and machine fluid condition - whether that
equipment is used for supplying building power, heating or cooling (HVAC).
Process Manufacturing
Machine condition monitoring based on oil analysis has become an important, if not
mandatory, maintenance practice for many manufacturing companies. An effective oil
analysis program will keep equipment running through effective condition monitoring of
oil wetted components.
Petrochemical
Today’srefineriesoperate24/365.Enhancedequipmentreliability,improvedmaintenance
scheduling and planned maintenance are all part of a world class condition monitoring
program through oil sampling.
TECHNICAL SALES MANAGER
7. brewerhendley.com
CONTACT US 803-972-0635 (C)
803-775-7723 (O)
chuckh@brewerhendley.com
207 N Forest Hills School Rd.
Marshville, NC 28103
CHUCK HINDS ICML MLA II
INDUSTRIAL OIL AND FLUID ANALYSIS CONTINUED...
Waste Treatment
Utilities are placing greater emphasis on environmental conservation and a focus on
delivering critical services while operating under reduced budgets. Oil analysis as part of a
robust maintenance program is a very cost effective way of meeting these requirements.
Metalworking
Contaminated metalworking fluids can cause serious health, environmental, tooling, and
product quality problems. Metalworking fluids testing provides information essential to
maintaining your fluids health.
TECHNICAL SALES MANAGER