1. ‘INSTA STRIP’
READY TO USE STRIP LAGGING
The Pulley Lagging is an effective means to avoid slippage of the belt thereby containing loss of
power (Co-efficient of friction is better in rubber to rubber than metal to rubber). The Lagging enhances pulley
life by avoiding its direct contact with the belt and consequent abrasion / wear / damage. The
efficient pulley lagging design provides good water dispersion property & restricts material
build-up.
Strip lagging is an effective, cheap, convenient and air bubble resistant pulley lagging process used
globally.
‘Instacon’ is a reputed & well established manufacturer of Strip Lagging in the country.
‘INSTA STRIP’ strip lagging rubber sheet is much advantageous than the conventional pulley
lagging rubber sheets.
INSTA STRIP PULLEY LAGGING
MINIMAL WASTAGE
There is no/ minimal wastage of ‘INSTA STRIP’ strip lagging sheet material. It is available in
standard / manageable/ manoeuvrable size of 200 mm width and continuous length of 50
meters or tailor made as per customer requirements (still larger diameter rolls are available
subject to transportable diameter/ weight).
Conventional Pulley Lagging sheets are available in higher widths, the extra width Pulley
lagging sheets are cut to make exact sizes and excess portion left is often thrown/ discarded/
scraped as wastage, which is a sheer loss to the user/ buyer/ customer.

2. LIGHT WEIGHT
‘INSTA STRIP’ is light weight, handy and easy to install.
Unlike conventional lagging ‘INSTA STRIP’ is installed along the horizontal axis of the pulley.
Conventional Pulley Lagging being bulky, very heavy in weight & size, un-manageable/ very
difficult to manoeuvre/ handle and install, whether in roll or near to size form.
AIR BUBBLE RESISTANT
‘INSTA STRIP’ strip lagging being manageable / manoeuvrable is easy to install, removal of
entrapped air is possible, requiring less down time.
Conventional Pulley Lagging being un-manageable / difficult to manoeuvre, leave possibility of
air entrapment between pulley and the lagging sheet, which may lead to premature separation /
failure of Conventional Pulley Lagging.
EASY TO REPAIR
As the name depicts ‘INSTA STRIP’ strip lagging is available in strips thus it is easy to repair/
maintain. Only damaged/ worn out portion of the lagging is removed and replaced with fresh
‘Insta Strip’ leaving remaining portion as it is thereby saving huge cost of lagging sheet, saving
on down time, effort etc.
In case conventional pulley lagging, complete sheet is replaced as effective repairs are not
possible, which is very costly, time and effort consuming preposition.
EXTRA GRIP & SUITABLE FOR SMALLER PULLEY DIAMETER
The unique tread type flexible design of ‘Insta Strip’ not only facilitate its application and
effective performance on lesser diameter pulleys than the conventional lagging sheets but also
provide extra grip.
TREAD TYPE FLEXIBLE DESIGN OF ‘INSTA STRIP’

3. LOWEST INVENTORY LEVEL
Since one type of ‘INSTA STRIP’ can be used for all types and sizes of pulleys this facilitates less
inventory level.
A huge inventory level is required for conventional lagging sheet as different sizes will have
different inventory levels.
ECO FRIENDLY
Our mission is to protect environment from warming and toxicity for our own and future
generation’s sake by virtue of providing energy efficient products, those render longer life.
SPECIAL BONDER RUBBER
‘INSTA STRIP’ strip lagging sheet is available with SPECIAL BONDER RUBBER. This feature
facilitates strip lagging application directly to the pulley (no buffing/ grinding of ‘Insta Strip’ is
required) and offers very high bond strength between pulley and the strip lagging.
Conventional pulley lagging sheets may not be available with special bonder rubber. Rubber
particles and fumes generated/ flare up during the buffing/ grinding are possible health hazards
and cause of concern worldwide.
ENERGY CONSERVATION
The higher life offered by ‘INSTA STRIP’ ultimately conserves energy/ natural resources by
avoiding repeated manufacturing and virtually eliminating pollution that would be caused due
to repeatedly generated scraps. We take utmost care for manufacturing, supply and service
products.
The best feature of ‘INSTA STRIP’ strip lagging is that it is available with ‘INSTA FIX’ vulcanizing
solutions, which ensures
ABSOLUTE COMPATIBILITY- EXCELLANT BONDING
EXCELLENT BONDING between lagging and pulley due to ABSOLUTE
COMPATIBILITY.

4. ‘INSTA FIX’ INSTANT READY TO USE VULCANIZING/ BONDING SOLUTION
The Conventional pulley laggings may not be available with compatible/ mother compounds,
which leave scope for POOR BONDING between pulley and lagging sheet.
Our special designs not only cut on costs per ton material handled but also cut substantial costs
on power consumption (an area, which most of the customers/ users/ purchasers over look/
ignore due to compulsion of time, price, awareness etc).
NO PULLEY SHAFT DAMAGE DURING REMOVAL / TRANSPORT
There’s no need to remove pulley/ shaft for ‘INSTA STRIP’ fixing (as required for hot pulley
lagging) hence there is no fear/ chance of damage or unbalancing of both.
For hot lagging process removal of pulley/ shaft from the installation is a must.
To strengthen your confidence further, we are enclosing herewith sample of ‘INSTA STRIP’ strip
lagging and CD demonstrating process/ procedure of strip lagging fixing for your evaluation.
We hope the above will strengthen your confidence in ‘INSTA STRIP’ strip pulley lagging and
you would like to have benefits of it.
PHYSICAL PROPERTIES
Thickness 10 mm 12 mm
Width 200 mm 200 mm
Standard Roll Length (Mtrs.) 10 10
(Up to 90 Mtrs. Single Roll Length available on request)
Colour Black Black
Pattern Style Diamond Diamond
Adhesives / Bonding / Vulcanising Process Cold Cold
(Preferably with Insta-Fix for enhanced life / performance)
Without Bonder layer Yes Yes
Bonder Layer (Available on special request) Yes Yes
Fixing time in comparison with Conventional / Hot Pulley Lagging Minimal Minimal
Material Build-up resistant property Very Good Very Good
Water Dispersion Property Very Good Very Good
Wear / Tear / Cut resistant property Very Good Very Good
General Application Yes Yes
Fire Retardant & Anti Static Application (Available on special request) Yes Yes

5. VERY SPECIAL INTRODUCTORY PRICE
On our part, we are offering you a very special introductory price for your trial and placing your
valued bulk order on us.
We, as a very special case, would depute our technical team to demonstrate and train your
personnel for strip lagging procedures in the event of placement of your valued order on us.
*********