Start from 2004, SinoVoIP Factory focus on Asterisk card, GSM Gateway, Opensource IPPBX, POE.
Should any support just kindly msg sinovoip@foxmail.com
We will full-support you in this field.
Thank you!
Cherry
3. AP100 User Manual
www.sinovoip.com.cn3
AP1000 is an ideal for small and medium hardware development platform, which
is based on the integration of Asterisk IPPBX solutions, plug plate design by preclude
the use of a modular,
In a small chassis, it integrates a variety of communication interface imports,
including analog access of imported FXO / FXS, digital access of imported E1 / T1.
AP1000 hardware development platform supports comprehensive protocol
processing, which is installed in the Linux-based operating system, and completely
open to the developers , developers on this platform is very easy to do secondary
development, to provide more value-added services unique.
AP1000 hardware platform overall Introduction
1, AP1000 hardware platform is composed of three parts as embedded boards,
bus adapter plate & Asterisk voice card .
DC +12V
Power input
VGA Ethernet
port1
Plug voice
card
USB1 USB2
Ethernet
port 2
RS232
6. AP100 User Manual
www.sinovoip.com.cn6
Plug in and pull out
guide rail
Plug in and pull out
guide rail
Voice card have 4kinds
AP1000_4FXO/FXS
AP1000_8FXO/FXS
AP1000_1 E1/T1
AP1000_2 E1/T1
7. AP100 User Manual
www.sinovoip.com.cn7
2、Embedded Motherboard Specifications
CPU Processor:Intel® Celeron® Processor 1037U (2M Cache, 1.80 GHz)
RAM:2GB DDR3 SDRAM (Maxim can expand to 8GB)
Hard dish capacity: 500G
2 USB2.0 connector
2 100Mbps Ethernet interface imports
1 VGA connector
1 232 serial port
8. AP100 User Manual
www.sinovoip.com.cn8
AP1000_4FXO / FXS voice card introduction
1. Support Quad FXO or FXS, and FXO and FXS can choose any
combination ,red module is FXO, green module is FXS.
2. Driver layer totally compatible with Asterisk card, we can enjoy Rource
code security and stability.
3. No need additional installation drivers, to avoid potential risks. Asterisk
comes complete with DAHDI / Zaptel driver (wctdm24xxp driver, no need
to install any patches
4. Support Linux, BSD operating system, CentOS, openSUSE, Fedora,
Debian, Ubuntu, AstLinux, FreeBSD, OpenBSD.
5. Base on DMA read and write data on technology to support fast data
transfer, significantly reducing the CPU usage of the computer.
6. Support codec A-Law, μ-Law, G.729, G.723, GSM, GSM, Speex, ADPCM
format.
7. Using pluggable architecture, very easy to replace.
8. In order to prevent loosening during transport modules, each one module has a
fixed column with base plate closely linked, very reliable.
1th
connector
2nd
connector
3rd
connector
4th
connector 1th module
2nd
module
3rd module
4th module
9. AP100 User Manual
www.sinovoip.com.cn9
9, After loading the drivers are OK, the front four LEDs L1, L2, L3, L4 is
illuminated
Fixed leg Fixed leg Fixed leg Fixed leg
10. AP100 User Manual
www.sinovoip.com.cn10
AP1000_8FXO / FXS voice card introduction
1.Support eight FXO or FXS, and FXO and FXS can choose any combination, red
module is FXO, green module is FXS.
2.Driver layer is fully compatible with Asterisk card, enjoy Rource code security
and stability
3.No need additional installation drivers, to avoid potential risks. Asterisk comes
complete with DAHDI / Zaptel driver (wctdm24xxp driver, no need to install
any patches).
4.Support Linux, BSD operating system, CentOS, openSUSE, Fedora, Debian,
Ubuntu, AstLinux, FreeBSD, OpenBSD.
5.Base on DMA read and write data on technology to support fast data transfer,
significantly reducing the CPU usage of the computer.)
1th connector
2nd connector
3rd connector
4th connector
5th connector
6th connector
7th connector
8th connector
3rd module
4th module
2nd module
1th module
5th module
7th module
6th module
8th module
11. AP100 User Manual
www.sinovoip.com.cn11
6 . Supports A-Law, μ-Law, G.729, G.723, GSM, GSM, Speex Codec ADPCM
format.
7.Using pluggable architecture, very easy to replace.
8.In order to prevent loosening during transport modules, each one module has a
fixed column with base plate closely linked, very reliable.)
9, After loading the drive normal, positive eight LEDs L1, L2, L3, L4, L5, L6, L7, L8
lights up.
Fixed leg Fixed leg Fixed leg Fixed leg
Fixed leg Fixed leg Fixed legFixed leg
12. AP100 User Manual
www.sinovoip.com.cn12
AP1000_1 E1 / T1 voice card introduction
1.It supports one E1 / T1 / J1 digital trunk lines, supporting SS7 (TUP / ISUP),
PRI, R2 and other signaling.
2.Supports the industry-standard telephony and data protocols, including SS7
signaling VII, PPP, Cisco, HDLC, and Frame Relay data modes.
3.Driver layer is fully compatible with Asterisk card, we can enjoy Rource
code security and stability.
4 . No need additional installation drivers, to avoid potential risks. Asterisk
comes completely DAHDI / Zaptel driver (wtc4xxxP driver, no need to
install any patches
5.Support Linux, BSD operating system, CentOS, openSUSE, Fedora, Debian,
Ubuntu, AstLinux, FreeBSD, OpenBSD.)
6 . DMA read and write data on technology to support fast data transfer,
significantly reducing the CPU usage of the computer.)
7.Support codec A-Law, μ-Law, G.729, G.723, GSM, GSM, Speex, ADPCM
format.
8.Via PCB board dial switch to select E1 and T1 mode.
9.Using pluggable architecture, very easy to replace.
Choose E1/T1 by Dial
swith
13. AP100 User Manual
www.sinovoip.com.cn13
AP1000_2 E1 / T1 voice card introduction
1.Support second Road E1 / T1 / J1 digital trunk lines, supporting SS7 (TUP /
ISUP), PRI, R2 and other signaling.)
2.Supports the industry-standard telephony and data protocols, including SS7
signaling VII, PPP, Cisco, HDLC, and Frame Relay data modes.)
3 . Driver layer is fully compatible with Asterisk card, enjoy Rource code
security and stability.
4 . No need additional installation drivers, to avoid potential risks. Asterisk
comes completely DAHDI / Zaptel driver (wtc4xxxP driver, no need to
install any patches
4.Support Linux, BSD operating system, CentOS, openSUSE, Fedora, Debian,
Ubuntu, AstLinux, FreeBSD, OpenBSD.
5.Base on DMA read and write data on technology to support fast data transfer,
significantly reducing the CPU usage of the computer.)
6.upport codec A-Law, μ-Law, G.729, G.723, GSM, GSM, Speex, ADPCM
format.
7.Via PCB board dial switch to select E1 and T1 mode.
8.Using pluggable architecture, very easy to replace.
Choose E1/T1 by Dial
swith
16. AP100 User Manual
www.sinovoip.com.cn16
3.Different countries use different standard power supply, AP1000 offers
two power lines, customer need to determine what kind before buying .
EU Power supply
China Standard power supply
17. AP100 User Manual
www.sinovoip.com.cn17
4.1PCS DC+12V 6A Power adapter
5.Steps of install the system
1)Display via VGA interface to access AP1000.
2)USB keyboard via USB1 interface to access AP1000.
3)USB drive or U disk via USB2 interface to access AP1000.
4)AP1000 embedded motherboard uses the power easyable start, as long as a
power plug adapter insert AP1000, AP1000 embedded motherboards will start
up.
5)Embedded motherboards boot AP1000 hardware platform, there are three main
ways, SATA hard drives, USB drives and U disk.
A) power plug adapter insert AP1000 hardware platform, press Del or Delete
key immediately, the Del key in the bottom right corner of the keyboard, and
some may use the delete key instead of this, as below
After enter BIOS, default is Main (Main Menu)interface, as below
19. AP100 User Manual
www.sinovoip.com.cn19
C) Hard Drive BBS priorities of the inserted hard disk detection options, press
Enter to enter this sub-menu, such as inserting multiple hard drives, you can
choose which specific hard disk boot.
D) USB Device BBS priorities of the inserted USB device detection options
such as USB U disk, USB drive, USB other storage devices, Enter to enter
this sub-menu, select the device you want to start. Show as below
21. AP100 User Manual
www.sinovoip.com.cn21
F) After setting press F4 to save and exit. YES Enter.
6)System Shutdown
When the system is turned off by way of software, the screen went blank,
Please be Noted, AP1000 hardware platform and not a total blackout,
pluggable voice card can not be implemented at this time, it is necessary
to dial down power plug adapter, AP1000 hardware platform was a total
blackout, now can pluggable voice card (Charged pluggable voice card
may be damaged AP1000 hardware platform).
22. AP100 User Manual
www.sinovoip.com.cn22
Only after pull out power adapter, the power LED
will offer, then AP1000 can totally power cut, and
then plug and pull out the voice card (or it will
damage AP1000
23. AP100 User Manual
www.sinovoip.com.cn23
For example: AP1000 hardware platform, insert a AP1000_2FXO + 2FXS voice
card, install Elastix
Here is dahdi_hardware, dahdi_scan tool detects results
dahdi_cfg Loading configuration
24. AP100 User Manual
www.sinovoip.com.cn24
The following channels was saw on dahdi show channels under asterisk cli. Different
modules configured with different results, do not represent all configurations. For
example 2FXO, 2FXS of channels
For example 4FXO channel