BOLDer Thinkers Games for Health IP

1. Brita Salzmann
chris Riesco
Gerardo Rodriguez
Martin Zupan
Savannah Tepley
Sean Starkman
Sunday, September 18, 2011 1

2. BOLDer
Thinkers
Brita Salzmann
chris Riesco
Gerardo Rodriguez
Martin Zupan
Savannah Tepley
Sean Starkman
Sunday, September 18, 2011 1

3. Original Design
Brita’s individual design
“keep thinking”
Sunday, September 18, 2011 2

4. Original Design
Brita’s individual design
“keep thinking”
Sunday, September 18, 2011 2

5. final Design
second design
Sunday, September 18, 2011 3

6. final Design
second design
final design “keep thinking bolder”
simplified the font to work with the EL
wire
the size of the design required the use
of 2 el wires, so we made the design
multicolored
Sunday, September 18, 2011 3

7. materials
Sunday, September 18, 2011 4

8. materials
• EL wire (green/blue and
yellow)
• black spray paint
• drill
• clear acrylic (24’’x20’’)
• superglue
• scissors
• masking tape
• electronics
Sunday, September 18, 2011 4

9. website
https://sites.google.com/site/
gamesforhealth2/
• final team logo
• component description of electronics
• progress
• project timeline
• team logo sketch
• pseudocode
Sunday, September 18, 2011 5

10. website
https://sites.google.com/site/
gamesforhealth2/
• final team logo
• component description of electronics
• progress
• project timeline
• team logo sketch
• pseudocode
Sunday, September 18, 2011 5

11. progress
Sunday, September 18, 2011 6

12. progress
• after finalizing our design we
used a paper towel to test the
laser and size
Sunday, September 18, 2011 6

13. progress
• after finalizing our design we
used a paper towel to test the
laser and size
• used 100W laser to cut out our
acrylic background
Sunday, September 18, 2011 6

14. progress
• after finalizing our design we
used a paper towel to test the
laser and size
• used 100W laser to cut out our
acrylic background
• drilled hole to hide electronics
behind logo
Sunday, September 18, 2011 6

15. progress
• after finalizing our design we
used a paper towel to test the
laser and size
• used 100W laser to cut out our
acrylic background
• drilled hole to hide electronics
behind logo
• spray painted acrylic for a
polished look
Sunday, September 18, 2011 6

16. progress
• after finalizing our design we
used a paper towel to test the
laser and size
• used 100W laser to cut out our
acrylic background
• drilled hole to hide electronics
behind logo
• spray painted acrylic for a
polished look
• assembled el wire to acrylic
background using superglue
Sunday, September 18, 2011 6

17. progress
• after finalizing our design we
used a paper towel to test the
laser and size
• used 100W laser to cut out our
acrylic background
• drilled hole to hide electronics
behind logo
• spray painted acrylic for a
polished look
• assembled el wire to acrylic
background using superglue
• tested, worked out kinks,
and retested
Sunday, September 18, 2011 6

18. • second EL wire, due to the size of our design, and trouble
ordering our second wire
• lab view issues: breadboard challenges with the lighting
• building issues: difficulties with the laser and corel draw,
change in acrylic background color due to cost
Sunday, September 18, 2011 7

19. Troubleshooting
• second EL wire, due to the size of our design, and trouble
ordering our second wire
• lab view issues: breadboard challenges with the lighting
• building issues: difficulties with the laser and corel draw,
change in acrylic background color due to cost
Sunday, September 18, 2011 7

20. special thanks
katie siek
TIM may
darren mcsweeney
mike elliot
Sunday, September 18, 2011 8

21. Sunday, September 18, 2011 9