The document provides instructions for operating different colored lights and boxes at an event. To turn the power supply on for the white box, the main switch should be flipped followed by 2-3 small switches; for the black box, 2-3 small switches should be flipped first followed by the main switch. Channel 19-20 are typically used for emcees. The blue tape slider changes the light shape while the yellow tape slider adjusts the size. Notes should be taken on advance light settings like cues and fade times.

1. no colour for sideboom (even
white) ***
to turn ON the power supply..
white box : main switch ,
followed by small switches 2-3 at
a time
black box : small switches 2-3 at
a time , followed by the main
switch
to turn OFF , do the opposite.
channel 19-20 : usually used for
emcees
SPOTLIGHT
blue tape slider : change
shape (DO NOT TOUCH)
yellow tape slider : change size
layout of lights

2. red 86.3%
green 87.8%
blue 49.8%
white 255
percentage to get pure white:
things to take note about
advanced lights :
1. timing is set as cue
2. fade is set at 2.00 s
take down your notes for advance lights here :