2. 2
Wireless Radio Technologies
Media Source Head-end / Base station CPE-device
Internet
LAN / PANSatellite
Satellite
Residential Gateway
LAN/PAN
WAN
MAN
UWB
Bluetooth
Zigbee
PAN
WiMAX
802.16d / e
Broadband
DVB-C DVB-T
Wi-Fi
802.11 a/b/g
NFC
RFID
LANMAN
WCDMA/HSDPA
HSUPA/GPRS/
EDGE EVDO
DVB-H
DVB-S
GMR/GMPRS
WANSatellite
3. 3
Embedded Devices in Wireless Radio
CPE Devices
Base-station
equipment
Test
equipment
•Low Cost
•Small Size
•Low Power
•Field-Upgradeable
•User-friendly
•Feature-rich
•Multimedia-enabled
•High Performance
•Low Power-Performance Ratio
•Upgradeable to newer standards
•Interface-friendly to allow
multi-vendor setup
•High Performance
•Reasonable Size Limitation
•Upgradeable to newer
standards
•Friendly User Interface to
run tests
•Complete Test Coverage
Wireless Radio
Devices
(PHY and MAC)
4. 4
Engineering Challenges
Needs to have robust field-upgradation feature
Needs to have comprehensive test-coverage, preferably automated
Needs to cater for delayed availability of Hardware
Needs to have distinguishing and differentiated features
Yet has to be of lower cost meaning that only low power CPUs and less
memory available for applications.
Yet has to be of lower power meaning that more and more features has to be
implemented in hardware (at least for portable devices)
Yet needs to meet real-time constraints
Yet has to be developed under stringent development schedule
Yet needs to follow laws of Physics
5. 5
Technology Challenges
Standard-driven – hence development has to start before standard is
out and needs to adapt to standard modifications
The chosen implementation platform needs to have flexibility for
standard adaptation
Technology life is usually small – need to extend this through partners
and industry bodies
Yet has to be of lower cost
Yet has to be of lower power (at least for portable devices)
Yet has to be developed under stringent development schedule
6. 6
Portable Devices Base Station
equipment
Test
equipment
SOC
(ASIC / ASSP)
Programmable
DSP
Microcontroller
FPGA / EPLD
Reconfigurable
Architecture
Programmability
Power&SpaceOptimization
Hardware Platforms for Wireless Radio
Software-defined
Radio (SDR)
7. 7
SDR Principles
Drivers
An ever expanding set of
‘contexts’
Adaptive Embedded
Telecom
•Active Networks
•BS Adaptivity
•Handheld
•BS Frontend
•Software Defined Radio
8. 8
SDR Features
SDR technologies provide software control of a variety of modulation, interference
management and capacity enhancement techniques over a broad frequency
spectrum (wide and narrow band), while ensuring secure communications
management.
√ Standard architecture for a wide range of communications products
√ Non-restrictive wireless roaming
√ Flexibility and adaptability
√ Potential for significant life-cycle cost reductions
√ Over the air upgrades
• Ease of design - Common RF front-end with different signal processing software
• Multimode - Simply loading appropriate software into the memory
• Use of advanced signal processing techniques - Implementation of new receiver
structures and signal processing techniques such as adaptive antennas, interference
rejection, and strong encryption
• Fewer discrete components - Decrease the size/cost and increase maintainability
• Flexibility to incorporate additional functionality—Better features and diagnostic
through software upgrades
11. 11
Physical Layer for 3G Protocol Conformance
Tester
Scope
• Design
• Implementation of signal processing blocks
• Unit testing by Automated Test Framework
• Addition of L1 functionalities
• Development of control interface
• System integration and validation
Environment
• Target Hardware:
- TI TMS320C6202 Octal DSP Board
• Software and Tools:
- MATLAB Toolbox
- TI CCS
• Languages
- MATLAB
- C
Challenges
• Complex and Computationally-intensive Signal
Processing Functions (Spreading, Viterbi, Turbo)
Solution
DSP Optimization
• High Data Rate – hence needs to be of low latency
Solution
Complex functions in FPGA
• Complex L1 Control Functions, high data-rate
between processors
Solution
Careful functionality based partition for
master and slave DSPs to reduce Inter-
processor communication bandwidth
• Rigorous unit testing and system testing ensuring
complete coverage
Solution
Automated Test Framework
Standards
HSDPA (UMTS Rel. 5), 1x-EVDO (cdma2000 Rev. A),
HSUPA (UMTS Rel. 6)
12. 12
Test vector
generation
Standards (HSDPA,
HSUPA, 1xEVDO …)
Unit test
plan
Input test vectors
Test Harness
Reference algorithm
implementation
Target DSP
implementation
Reference Output Actual Output
Σ
+
-
Test report
(Pass / Fail/
Diagnostics)
Configuration setup
Test case setup
Test vector format
Reference and target configuration
Error Criterion
MAD / SAD / Bit true /
Symbol TrueGENERALIZED TEST PLATFORM
Automated DSP Test Framework
13. 13
Automated DSP Test Framework
Salient Features
• Generates test vectors combinatorial to input parameters
• Supports both little-endian and big-endian architectures
• Supports both signed and unsigned data types.
• Concept of ‘Tying-up’ parameters has been introduced.
• Various bit-streams
All 0's, All 1's
Alternate 1's and 0's starting with 1 or 0
Random 1's and 0's - 1's and 0's with
equal/different probability
• Variable data width
• Totally automated for running all test cases
• Automatic comparison of results
• Automatic measurement of execution time
• Can be tested for bit-exactness as well as specified
allowable difference
Objectives
• Build an automated test harness for
regression testing of signal
processing function implementation
• Minimize testing effort and thereby
cost
• Minimize manual interaction
• Design should be adoptable to
various platforms
14. 14
IEEE 802.16 WiMAX MAC
Scope
• Design, Development and Testing of SS & BS MAC
• First Phase Development on Simulated PHY
• Porting and Integration with hardware PHY and RF.
• Addition of 802.16h
• Development towards 802.16e
Environment
• Target Hardware:
- PowerPC based Board
• Software and Tools:
-Low foot-print Linux Kernel
-GNU Toolchain
• Languages
- C/C++
- TTCN
Challenges
• Complex State-machine with requirement for interfacing
to multiple PHY chips and upper layers
Solution
Use of Generic MAC framework
• Computationally-intense blocks like encryption and need
of extremely fast response time for certain messages
Solution
Requires careful Hardware-Software
partitioning and use of Lower-MAC
• Designing scheduling algorithms to guarantee QoS
Solution
Use of MAC Simulator Framework
• Thorough Testing and Standard Compliance
Solution
Use of MAC Testing Framework
• Cognitive Radio Concepts (802.16h, 802.22)
Solution
Participation in Standard Bodies
Standards
IEEE 802.16-2000 (WiMAX Fixed), IEEE 802.16e
(WiMAX Mobile)
15. 15
Wireless MAC Framework
Simulator Framework
• PHY abstraction forperformance
evaluation
• Simulatorlevel, node level and
protocol level control
• Performance Visualization –
throughput and delay
Development Framework
• Generic Frameworkfor Wireless MAC
engines
• Adaptable to most of Wireless MACs
• Reduces MAC development time
without compromising on performance
Test Framework
• Standard based test definition
• Automated Execution
• Unit and Module level Testing
• Automated Report Generation
• NetworkSimulator(version 2) based
• Tuned forWireless Networks
• Topology, simulation duration, mobility, flow definitions @
simulatorlevel
• Protocol stackdefinition @ node level
• Parameterdefinition @protocol level
• Currently done forIEEE 802.15.3 UWBMAC
• Core MAC, PHY-SAPand MAC-SAPseparated out
• Thin OSAL
• Independent library module forutility functions
• Currently being done forWiMAX802.16-2004
• Test suite Adaptation Layer
• Test Execution Adaptation Layer
• Test Management Layer
• TTCN-3 based scripting for test suite
definition
• Currently being done forWiMAX
802.16-2004
16. 16
Generic MAC Development Framework
Physical Layer
Core MAC
PHY-SAPInterface
Framework
Library OSAL
Device Driver
MAC-SAPInterface
