1. Aqeel Ahmed
Contact #: +92311-2706803
Email ID: engraqeel33@yahoo.com
Address: 24/14, Sector 5-D, North Karachi, Karachi.
Objective
To be able to work and grow professionally as a Chemical Engineer in a stable organization where I can demonstrate my
expertise in Chemical products, as well as contribute to the company’s goals and ambitions.
Education
B.E – Chemical Engineering 2010 – 2013
 Karachi University , Karachi 1st
Division
Intermediate – Pre-Engineering 2007 – 2009
 SM Science College, Karachi 1st
Division
Matriculation – Science group 2005 – 2006
 B.W.P School, Karachi A Grade
Experience
Production Engr. – Technical Nov 2014 – Present
Well Lubricant, Karachi
 Currently Functioning in the Blending Processing Unit, undergoing various job responsibilities that include:
 Leads and oversees the duties carried out by staff within blending and filling section performing supervisory
functions at the level established by Management.
 Ensure that staff members work according set standards and procedures, the work place is kept clean and tidy and
safety procedures are adhered to.
 Assist the lube and Grease plant Department Manager in organizing blending and filling schedules.
 Oversees the daily dip taking of base oil and additives storage tanks by using the calibration record for each tank to
check the volume and temperature.
 Calculate the correct quantity to ensure that there is sufficient material available to meet requirements.
 Prepare the base oil and additives stock statement, showing the stock of bulk materials in each tank and type of
product.
 Submits statement weekly to the Department Manager.
 Gathers daily production details and prepares blending reports, monthly stock statements and other reports as
required, such as consumption of each ingredient.
 Assists the Lube and Grease plant dept Manager in developing existing manual production reports, not covered by
the information held in the system
 Determine ways to automate the manual reports through liaison with the I.T Department.
 Supervises and oversees the withdrawal of base oils, additives and empty packages from storage tanks and
Lubricant stores.
 Arrange and oversees the receipt, sampling and discharge of bulk liquid additives containers (BLC’s) and ensures
that delivery discharge is into the correct tanks.
 Check the quality and quantity of goods received.
 Ensures that correct formulation is used for blending of required grades, in accordance with set formulas, by
comparing with the Quality control Laboratory sample.
 Supervises the withdrawal ofsamples of finished products from the kettles, and send to the Laboratory for testing.
 Arrange any necessary adjustment to be made such as further blending. Arrange the re-blending of slow or non-
moving lube grades by coordinating with the laboratory and Quality Control.
 Plans manpower distribution in Lube blending and filling section accordingly to daily production schedules and
proper allocation to each section at the start of shift each day.
 Coordinates with planning Engineer to prepare and issue daily filling program in accordance with weekly production
program provided by Planning Engineer.

2.  Oversees duties of the Lube Supervisor-Filling Senior Technicians, Technicians to ensure that the ISO 9001-2008
quality control procedures are adhered to all times.
Management Trainee – Quality/Technical Mar– Oct 2013/14
Fluid Technology International Pvt.Ltd., Karachi
o RESPONSIBILTIES.
 Inspection of RO plants and checking its parameters.
 Monitoring of RO Plant.
 Cleaning (alkaline and acidic) of Membranes of RO plants.
 Settling of Membranes according to their weights when required.
 Water Testing via Titration.
 Technical Report writing on daily basis.
 Daily communication with managements about progress of plants.
 Working on sales weekly.
Good at in following water testing of RO plants, Boilers, Cooling towers, Engine, and Raw Water.
 Calcium and Magnesium Hardness.
 Carbonates, Bicarbonates, & Caustic Alkalinity.
 Sulfite and Phosphate.
 Chlorides & Iron.
 Total and Free Chlorine.
 High and Low Range Silica.
 SDI (Silt Density index) Test.
FEROZE 1888 TEXTILE:
SUPERVISOR OF FOLLOWING PLANTS:
o R.O PLANT
o SOFTNER PLANT
o DEMINEARLIZATION PLANT
Project Engineer – Final Year Project Jan – Dec, 2013
Karachi University , Karachi
 Production of liquid Oxygen and liquid Nitrogen by Cryogenic Distillation Process.
Internee - Summer Internship Program 1st
Dec – 30th
Dec,2012
PAKISTAN STEEL MILLS, Karachi
o Completed a 4-week Summer Internship Program at the Cold Rolling Mill (CRM) Unit, Coke OvenBattery
Plant (COBP), Oxygen Plant and Process laboratory.
Skills
Technical
 Effective knowledge and practical exposure of Blending Process technicalities, parameters and Testing.
 Proficient in the use of Microsoft Office (Word, Excel, PowerPoint) with effective Documentation, Reports Management
and Presentation making skills.
Management
 Able to absorb/understand obstacles and come up with strategic/beneficial solutions, as per my knowledge on Chemical
Engineering and decision making skills. Leadership qualities with project and team management skills.
Communication
 Excellent in oral and written communication. Good negotiation skills with both senior & junior officials. Convincing
Presentation skills polished through experiences of courses, workshops & presentations.

3. Highlight
Membership
 Active Member Of Chemical Engineers Students Society (CHESS).
Personal Info
Date of Birth 05TH
August, 1989
NIC # 41304-6474781-9
Father Name Shakeel Ahmed
Nationality Pakistani
Marital Status Unmarried