Halnn has successively developed BN-H10 and BN-H21CBN tools for continuous cutting and interrupted cutting conditions, and has outstanding advantages in the field of hard turning, and provides coatings and wipers CBN tools
Maximizing Incident Investigation Efficacy in Oil & Gas: Techniques and Tools
solution for hard turning hardened steel gears of cbn tools
1. www.halnncbn.com
Solution for hard turning hardened steel gears of CBN
tools
With the transformation and upgrading of the manufacturing industry, more and
more high-hardness and difficult-to-machine materials are used in the
manufacturing industry, and in the face of continuous updating of mechanical
metal parts and materials,Halnn Superhard has successively developed
BN-H10 and BN-H21CBN tools for continuous cutting and interrupted cutting
conditions, and has outstanding advantages in the field of hard turning, and
provides coatings and wipers CBN tools .
CBN tool for continuous turning gear--BN-H10 CBN tools
When continuously cutting high-hardness workpieces, CBN tools need to have
high wear resistance, high tool life, and high surface finish of processed
workpieces. Halnn CBN tools BN-H10 can not only meet the above
requirements. And the production cost per piece is greatly reduced compared
with imported CBN tools.
Halnn CBN tools BN-H10 continuous turning gear
Processing conditions: Continuous turning
Workpiece hardness: HRC58-62
Tools type: BN-H10 CNGA120408
Cutting parameters: Cutting speed(Vc)=180m/min,
Feed rate(Fr)=0.1mm/r,
Cutting depth(ap)=0.2mm
Processing method: dry cutting
2. www.halnncbn.com
Tool material
Cuttingspeed(Vc)
m/min
Tool life
pcs/edge
Production beat
s/pcs
Halnn BN-H10 180m/min 800 6s
a European ceramic tools 130m/min 150 8.5s
CBN tool for intermittent turning gear--BN-H21 CBN tools
Intermittent turning conditions, CBN tools not only need to have high wear
resistance, but also need to have strong impact toughness and fracture
resistance, and encounter oil holes or keyways without chipping. Halnn CBN
tools BN-H21 uses nano-scale binder and high-purity CBN particles to optimize
the ratio, which can meet the stable interrupted cutting of gears, gear shafts
and bearings.