MW link detail

1. ADM Add Drop Multiplexer
AP Application Interface card slot
ASNC Asynchronous
ATPC Automatic Transmitting Power Control
AUX Auxiliary interface card
BER Bit Error Rate
BSC Base Station Controller
CAPEX Capital Expenditure
CS Cross-connect Switch card
DXC Digital Cross Connect
EOW Engineering Order Wire
EMC Erector Magnetic Compatibility
ETSI European Telecommunications
Standards Institute
EXTCLK External Clock
FAN FAN Unit
FD Frequency Diversity
FE Fast Ethernet
GbE Gigabit Ethernet
HS Hot Standby
IDU Indoor modulator/demodulator Unit
INTFC Interface
MCP Main Control Processor
MODEM Modulator/Demodulator
MSP Multiplex Section Protection
MTPC Manual Transmitting Power Control
Node-B Wireless Base Station Equipment
OAM&P Operation, Administration,
Maintenance and Provisioning
ODU Outdoor transmitter/receiver Unit
OPEX Operation Expenditure
PDH Plesiochronous Digital Hierarchy
PINF Power Interface card
QAM Quadrature Amplitude Modulation
QPSK Quadrature Phase Shift Keying
RA Radio Access card
RCP Radio Control Processor
RNC Radio Network Controller
SD Space Diversity
SDH Synchronous Digital Hierarchy
STD Standard
STM Synchronous Transport Module
SYNC Synchronous
VLAN Virtual LAN
Cat. BMW033-1
08041001KM
©NEC Corporation 2008
Abbreviations
Specifications
*1: For 18 GHz 13.75 MHz (QPSK/10E1, 16QAM/20E1) and 27.5MHz (QPSK/20E1, 16QAM/40E1, 32QAM/48E1) are available.
*2: Additional attenuation is not available.
*3: Additional attenuation (5 dB maximum) is available.
*4: Availability depends on frequency band.
*5: Depends on combination of system configuration.
(Typical Values)
-: Not available Specifications are subject to change without notice.
ld of Smart Radio Access
Main Features
Design concept
■ Six-way one-box IDU type
■ SDH and PDH combined operation
Key specifications
■ Frequency bands: 6 to 52 GHz
■ Radio transmission capacities:
5 to 48x2 Mbps (for PDH Mapping), 63x2
Mbps (for SDH Mapping), 155 Mbps,
2x155 Mbps
■ DXC function: 1008E1x1008E1 matrix switch capability,
CS (hardware) redundant availability
■ Modulation: QPSK/16/32/128 QAM
Scalability
■ Up to six-way nodal expansion
■ Software selectable modulation
From QPSK up to 128 QAM
■ XPIC system in a single box
■ Flexible configuration (1+0, 1+1, HS/SD/FD)
■ Flexible configuration for any type of network topology
Repeater, Tree and Star, etc.
■ MODEM and ODU resemble PASOLINK NEO series
Technical merits
■ Nodal radio solution
■ DXC function is a practical application for nodal network
station with complex wiring
■ More flexible and efficient expansion
Smart, new DXC function facilitates network capacity solution
■ Supports ADM function
■ VLAN implementation
■ MSP for SDH optical interface
Operational merits
■ Superior reliability
■ Easy network configuration
■ Full front access
■ CAPEX and OPEX reduction
Easy remote route connection setting and operation from
distant sites
Classification
Frequency Band
Range (GHz)
Modulation Scheme
Channel Spacing (MHz)
Transmission Capacity (*1)
Frequency Stability
Output Power
(dBm, at Ant. Port)
System Gain (dB measured at Ant. Port, BER 10-6
)
QPSK
16 QAM
32 QAM
128 QAM
MTPC Range
(1 dB step, variable)
ATPC Range
(1 dB step)
XPIC Function
DXC Function
Traffic Interface
LAN Interface
VLAN
Service Channel
Standard Compliance
Antenna Size
Ambient Temperature
Operation System
Power Consumption (approx.)
ODU
IDU
Dimensions and Weight (approx.)
ODU
IDU
Input DC Voltage
EMC
Electrical specifications
QPSK
16QAM
32QAM
128QAM
QPSK
16QAM
32QAM
128QAM
Fast Ethernet
Gigabit Ethernet
6 - 11 GHz
13 - 52 GHz
6-11, 28, 32, 52GHz
13-26, 38 GHz
20E1 (40 Mbps)
10E1 (20 Mbps)
5E1 (10 Mbps)
40E1 (80 Mbps)
20E1 (40 Mbps)
10E1 (20 Mbps)
5E 1(10 Mbps)
48E1(100 Mbps)
63E1/STM-1(155Mbps)
QPSK
16QAM
32QAM
128QAM
QPSK
16QAM
32QAM
128QAM
6 GHz
5.925-7.125
+29
+27
+25
113
116
119
104
107
110
113
100.5
94.5
+21.5
97.5
100.5
103.5
106.5
7-8 GHz
7.125-8.5
10-11 GHz
10.15-11.7
13 GHz
12.75-13.25
15 GHz
14.2-15.35
18 GHz
17.7-19.7
QPSK/16/32/128 QAM software selectable
7 (5E1), 14 (10E1), 28 (20E1)
3.5 (5E1), 7 (10E1), 14 (20E1), 28 (40E1)
28 (48E1)
28 (63E1/STM-1)
±6 ppm
23 GHz
21.2-23.6
26 GHz
24.25-26.5
28 GHz
27.5-29.5
32 GHz
31.8-33.4
38 GHz
37.0-40.0
52 GHz
51.4-52.6
+22.5 +20 +18 +17
+17
103.5
106.5
109.5
91.5
94.5
97.5
100.5
90
84
-25 dB to 0 dB (*2)
-23 dB to 0 dB (*2)
-20 dB to 0 dB (*2)
-25 dB to 0 dB (*2)
+18
+14.5
+14.5
99.5
102.5
105.5
89
92
95
98
87.5
81.5
+3
-
-
81
84
87
-
-
-
-
-
-
-10 dB to 0 dB
-
-
-
-10 dB to 0 dB
-
-
-
+25
95.5
89.5
108
111
114
1+0
30 W
23 W
1+1
30 W x 2
23 W x 2
1+0
237 (W) x 237 (H) x 101 (D) mm, 3.5 kg: One ODU
239 (W) x 247 (H) x 68 (D) mm, 3 kg: One ODU
1+1
Double ODU
Double ODU
250 W (*5)
442 (W) x 298 (H) x 230 (D) mm, 17 kg (*5)
-48 V (-40.5 to -57 V)
Conforms to ETS 301489-4
Conforms to ETS 302217-2-2
2 x STM-1 CCDP (Co-Channel Dual Polarization) within 28 MHz bandwidth available
1008E1 x 1008E1 Matrix Switch Capability
32E1 (2 x 16E1)/Card, 75 ohms unbalanced or 120 ohms balanced
MDR 68 pins, HDB-3 (ITU-T G.703)
4 x STM-1 Optical or Electrical
Optical: LC, S-1.1 or L-1.1 (ITU-T G.957, MSP function available), Electrical: 75 ohms IEC 169-29 (1.0/2.3) (ITU-T G.703)
2 x STM-4 Optical
Optical: LC, S-4.1 or L-4.1 (ITU-T G.957, MSP function available)
PDH: 6 x FE (for PDH Mapping), SDH: 6 x FE (for SDH Mapping)
RJ-45, 10/100 Base-T(X), IEEE 802.3/802.3u/802.3x, RMON
2 x GbE + 4 x FE (for SDH Mapping)
LC, 1000 Base-SX/LX, IEEE 802.3z, 64 to 9600 Bytes frame size
Port Base VLAN, IEEE 802.1Q, IEEE802.1p CoS
3 x V.11 (64 Kbps SYNC, Contra/Co-directional selectable), 3 x RS232C (9.6 Kbps ASYNC), 2 x EOW
LAN Interface: LAN PORT 1 and PORT 2 (Throughput 64/128/256 kbps)
0.3/0.6/0.8 (0.9)/1.2 and 1.8 m (*4)
IDU : -5 to +50˚C (workable -10 to +55˚C) ODU : -33 to +50˚C (workable -40 to +55˚C)
PASOLINK Network Management Terminal (optional)
106.5
109.5
112.5
99
102
105
108
96
90
-30 dB to 0 dB (*2)
-23 dB to 0 dB (*3)
-20 dB to 0 dB (*3)
-30 dB to 0 dB (*2)
-24 dB to 0 dB (*2)
-24 dB to 0 dB (*2)
-23 dB to 0 dB (*2)
-20 dB to 0 dB (*2)
+21 +18
105
108
111
+23 +22
92.5
86.5
+24
+22
+19
107.5
110.5
113.5
98.5
101.5
104.5
107.5
94
88
98.5
101.5
104.5
107.5
96
99
102
105
94
97
100
103
BER 10-3
, System Gain +1.5 dB
PASOLINK NEO/a Enhanced NODAL
E1
STM-1
STM-4
Operation IDU: ETSI EN301019-1-3 class 3.1E
Transportation IDU/ODU: ETSI EN301019-1-2 class 2.3
Operation ODU: ETSI EN301019-1-4 class 4.1
Storage IDU/ODU: ETSI EN301019-1-1 class 1.2
STM-1
E1 LAN
N×E1+LAN
LAN
N×E1
N×E1
N×E1
Wireless Base Station
Node-B WiMAX
NEO
NEO/a
NEO
NEO
NEO/a
PASOLINK Radio Network
STM-1 (155 Mbps)
Tree Node
Tree Node
2-Way DXC
Expandable
(Nodal Solution)
Repeater

2. PASOLINK NEO/a is a smart, new solution for the evolving market toward triple play and all-IP
networks in all segments.
Its advanced design provides reliable digital access links that fully exploit the potential of
end-to-end advanced networks. The system meets increasing demand for digital transmission
services satisfying the needs for common carrier access links, private links, urban area networks,
rural area networks, temporary networks or emergency links for voice and data transmissions.
The field-proven PASOLINK equipment offers very high performance reliability, high system
flexibility, and easy installation.
The PASOLINK NEO/a system provides several interface types of PDH, SDH and LAN with
transmission signal of 5 to 48 x E1, 63 x E1, STM-1, 10/100 Base-T and GbE per rack.
Resembling the PASOLINK series, this system consists of antennas, outdoor unit (ODU) and
indoor unit (IDU). Each radio channel is connected through a coaxial cable.
Available configurations are non-protected type (1+0), protected type (1+1) and one- to six-way
Digital Cross Connect. The protected type is available as twin-path type or hot-standby type.
One-box IDU
Block Diagram
Nodal Application
Configuration Scalability
PASOLINK NEO/a Network Application
NEC and the Evolving World of Smart Radio Access
Six MODEMs per chassis
STM-1
E1 LAN
N×E1+LAN
LAN
N×E1
N×E1
N×E1
Wireless Base StationWireless Base StationWireless Base Station
Node-B WiMAX
NEO
NEO/a
NEO
NEO
NEO/a
PASOLINK Radio Network
Different interface card are accommodated in a single box.
STM-1 (155 Mbps)
Node-B
Node-B
NEO
LAN
RNC
STM-1
GbE
STM-1
STM-1
(155 Mbps)
N×E1+LAN
1+1 Radio
1+1 Radio
Hardware
Redundancy
STM-1
STM-1
6×FE
6×FE
32×E1
32×E1
1+0 Radio
1+0 Radio
N×E1+LAN
NEO
N×E1
N×E1
N×E1
Node-B WiMAX
NEO
Star Node
NEO/a
(Enhanced Nodal Solution)
(FE INTFC)
(STM-1 ELE)
Upgradeable
Scalability.
Low initial cost.
(STM-1 OPT)
(32E1 INTFC)
(GbE INTFC) Plan (STM-4 OPT) Plan
Five interface card slots
MODEM Modulator Demodulator card
PDH/SDH/LAN Interface card
32E1
STM-1 E
STM-1 O
STM-4 O
FE (for PDH)
FE (for SDH)
GbE
32 x E1
4 x STM-1 Electrical
4 x STM-1 Optical
2 x STM-4 Optical
6 x FE (for PDH Mapping)
6 x FE (for SDH Mapping)
2 x GbE + 4 x FE (for SDH Mapping)
AP
Card Function
CS
RA
MCP
RCP
AUX
PINF
FAN
1008x1008E1 Cross-connect Switch card
Radio Access interface card
Main Control Processor card: OAM&P
Radio Control Processor card: OAM&P
Auxiliary interface card: DSC/WS
Power Supply card
FAN Unit
Card Function
AP
CS RA
AP
AP
AP
AP
MODEM
MODEM
MODEM
MODEM
MODEM
MODEM
ODU
ODU
ODU
ODU
ODU
ODU
STM-1
STM-4
NEO/a NEO/a
(Optical cable)
STM-1
NEO
NEO
N E1
N E1
N E1
N E1
BSC
STM-4
STM-1
STM-1
N E1
N E1
N E1
N E1
BSC
STM-1
STM-1
LAN
LAN N E1
+LAN
N E1
N E1
STM-1/N E1
STM-1
STM-1
STM-1
NEO
NEO
N E1
N E1N E1
N E1+LAN
LAN
LAN
E1 / Ethernet combination
Throughput: 2~100Mbps
(2Mbps step)
WiMAX
IP Network
AP #5
AP #3
AP #1
AP #4
AP #2
Baseband Interface Card
N-Way solution for high-capacity sites N-Way solution for combination sites
MODEM #5
MODEM #3
MODEM #1
MODEM #6
MODEM #4
MODEM #2
Free Bit-rate
5 / 10 / 20 / 40 / 48E1
STM-1 / 2×STM-1
Free Modulation
QPSK, 16 / 32 / 128QAM
RF Bands
6GHz~52GHz
Free Bit-rate
5 / 10 / 20 / 40 / 48E1
STM-1
Free Modulation
QPSK, 16 / 32 / 128QAM
MODEM and small, light ODU resemble PASOLINK NEO Series.
(Standard MODEM)
Free Bit-rate
STM-1 / 2×STM-1
(up to 310MB)
Free Modulation
128QAM
(High Capacity MODEM) Plan
Upgradeable
Scalability
Tree Node
Tree Node
2-Way DXC
Expandable
(Nodal Solution)
Repeater