Flood jet nozzles spoon type

1. Flood Jet Nozzle - Spoon type
G L1 L2 Square
1/8 18 13 14 mm
1/4 51 22 19 mm
3/8 76 29 25 mm
½ 114 35 32 mm
3/4 124 44.5 43 mm
In this type of nozzle the liquid is fed under pressure to a round outlet orifice, and then deflected onto a smooth
profiled surface so as to assume a flat jet shape.
This sophisticated design is of advantage since it offers a stronger jet impact using the same feed pressure.
Higher efficiency comes from the very little energy required to just change the direction of the liquid flow, this
being the only energy required to generate the flat jet
Characteristics : Its work on the impact principle, with a high efficiency and an low plugging risks.
Design : One piece construction, non clogging type. Accurate machined to provide very high impact.
Application : Gravel Washing, Ringing, Control of Foam etc.
Flow rate : 1.6 LPM to 86 LPM
Pressure : 2.0 Kg/cm² or specified
Spray angle : 35° to 50°
End connection : 1/8" to 3/4 “ BSP/BSPT/NPT(m/f)
M.O.C. : S.S. 316, 304, Brass,
L1
L2
Sq
Spray Angle
ABHIIndustrial Corporation
ABHI
Abhi Industrial Corporation
D-126, sector -7, Noida - 201 301
Uttar Pradesh, India
Mobile : +91-9818679021, 9910940535
e-mail : abhinavmishra13@gmail.com
abhiindustrialcorporation@gmail.com
info@abhiindustrial.com
Web : abhiindustrial.com