Call for Papers - International Journal of Intelligent Systems and Applicatio...
Portfolio
1. PORTFOLIO
Mechanical Engineer
Abdullah Ahmed Abdel-Aziz
Contact
+20 155 352 2588
(03) 522 7883
abdullah_ahmed_abdel-aziz@outlook.com
linkedin.com/in/abdullah-ahmed-938134188
grabcad.com/abdullah.ahmed-36
2. OBJECTIVES Proactive recent college graduate with a BSc in Mechanical Engineering.
Aiming to leverage academic experience and a proven knowledge of
research and development and experimental design to successfully fill
the Mechanical Engineer role.
Languages
Software
Festo
Arduino IDE
EES
Matlab
Microsoft Office
WaterCAD
AutoCAD
COMSOL
Ansys FEA
Ansys CFD
SolidWorks
English
Arabic Interests
• Physics especially Fluid Mechanics
• CFD and FEA
• Pneumatic and Hydraulic system.
• Automotive and Aerodynamics.
• Planning and Management.
Domain
Education
BSc in Mechanical Engineering
Alexandria University, Egypt
2014 – 2019
Grade: Good (74 %)
Strength
• Creative
• Proactive
• Modification
• Multitasking
• Hard Worker
Machine design
Sheet Metal part design
Computational Fluid Dynamics (CFD)
Finite Element Analysis (FEA)
Motion Analysis
Programing
5. Shaft Flange Description this design to transmitting 100 KW at 10 rps
Material Flanges 0.2%C Cast Carbon Steel
Keys 0.3%C CDA Steel
Bolts Class 5.8 Medium Carbon Steel
CAD Software SolidWorks and AutoCAD
Design time 1-2 hours
6. Knuckle Joint Description this design to withstand a load of 30_KN
Material Yoke Cold-Drawn Carbon Steel 0.4% C
Pin Cold-Drawn Carbon Steel 0.3% C
CAD Software SolidWorks And AutoCAD
Design time 1-2 hours
7. Hydraulic Cylinder Description Piston Diameter = 100 mm
Rod Diameter = 50 mm
Max. Pressure = 160 bar
Material Stainless Steel
CAD Software SolidWorks
Design time 5-6 hours
9. Gear Box Description this design to withstand a Power of 3000_kW
at 7000_rpm
the total gear ratio is 8.6
Material Stainless Steel
CAD Software SolidWorks
Design time 5-6 hours
11. Ram Pump Description A hydraulic ram Pump is a cyclic water pump
powered by hydropower. It takes in water at
one "hydraulic head" (pressure) and flow rate,
and outputs water at a higher hydraulic head
and lower flow rate.
Material PVC
CAD Software SolidWorks
Design time 2-3 hours