This document describes an electronic water purification system called the Electronic Water Purifier (EWP). The EWP uses electrodes made of activated carbon and other materials layered in a cell casing to remove contaminants from water through an electrochemical process without chemicals or pre-treatment. When the electrodes become saturated, the polarity is reversed to flush contaminants out of the system. The EWP can be built in series for high contamination levels or in parallel for higher water volumes and is available in models that treat up to 90,000 liters per day.

1. The Waterfront
Unit 110, 19 Kitchener Drive,
DARWIN. NT. 0800 Australia
Mob: +61 488 333 193
Fax: +61 8 8941 0096
Ph: +618 8941 8479
Email: info@geaust.com.au
Electronic Water
Purification
CONTAMINANTS REMOVED
 Total Dissolved Solids
 Arsenic
 Calcium
 Lead
 Metals (including iron, manganese & magnesium)
 Nitrates
 Sodium Chloride
 Sulphates

2. The Waterfront
Unit 110, 19 Kitchener Drive,
DARWIN. NT. 0800 Australia
Mob: +61 488 333 193
Fax: +61 8 8941 0096
Ph: +618 8941 8479
Email: info@geaust.com.au
EWP
Electronic Water Purifier
The next generation of water technology
BENEFITS
Simple operation and low operating costs.
Modular construction, to suit varying water volumes and treatment requirements.
Designed for use with solar power and 240v power.
No nasty daily chemicals required, as no membranes.
No pre-treatment needed such as membranes and media.
High recovery of treated water.
More efficient than any other single technology.
(STEP 1) Minerals are the major components of TDS (total dissolved
solids). These minerals need to be removed on many applications, or
they will form deposits. The Electronic Water Purifier makes patented
technology available to generate a deionised quality water.
Electrodes used are made from activated carbon and other materials.
These electrodes are layered into a cell casing. DC power is applied
across the electrodes. The individual electrodes are charged with different
polarities.
(STEP 2) Minerals in water have polarity charges, and are attracted to the
opposite polarity of the electrode, thus removing the minerals from the
water. These minerals are electrochemically absorbed on the surface of
the electrode creating the pure water. When sufficient minerals are
deposited on the electrodes and conductivity increases
beyond the set point desired, the electrodes go through regeneration
steps.
(STEP 3) The contaminants are repelled from the electrodes when the
polarity is reversed and flushed via a valve when the solenoid opens,
discharging the contaminants. This completes the cycle.

3. The Waterfront
Unit 110, 19 Kitchener Drive,
DARWIN. NT. 0800 Australia
Mob: +61 488 333 193
Fax: +61 8 8941 0096
Ph: +618 8941 8479
Email: info@geaust.com.au
Electronic Water Purification
Build in series for high
contamination levels
Build in parallel for
higher water volumes

4. The Waterfront
Unit 110, 19 Kitchener Drive,
DARWIN. NT. 0800 Australia
Mob: +61 488 333 193
Fax: +61 8 8941 0096
Ph: +618 8941 8479
Email: info@geaust.com.au
EWP
Electronic Water Purifier
Models:
P1: 3,750 Ltrs per day
P2: 7,500 Ltrs per day
P4: 15,000 Ltrs per day
P8: 30,000 Ltrs per day
P16: 60,000 Ltrs per day
P24: 90,000 Ltrs per day
You Tube Video
http://youtu.be/TSeUL75F_wA
www.geaust.com.au