MULTIPRESS FLEXO MACHINES Multipress is a company that has been selling flexo printing machines and related conversion equipments for over 40 years. The company has evolved a unique market offering of hight quality low cost and market targetted machine ranges

1. MULTIPRESS FLEXOGRAPHIC PRINTING TECHNOLOGIES
Strada Statale 11, 126
25011Ponte San Marco, Calcinato
Brescia – ITALIA
Tel: +39 030 9980388 – fax: +39 030 9969686
Email: info@multipress.it and sales@multipress.it
http://www.multipressflexo.it

2. OUR COMPANY
 Multipress is a company located in northern Italy,
between Brescia and and Verona, near Garda lake.
 For more than 50 years is in the graphic arts industry
and since 1994 it produces CI flexo printing machines
and auxiliary equipments.
 We take advantage this digital open house to point out
that our proucts are entirely designed and made in Italy
also with patented technologies.
 These machines are absolutely at a good level in quality
and technology.
 We are glad to introduce you our range of products.

3. LOCATION

4. OUR PRODUCTS
PRE-PRESS
TMS and TEKTRONIC
MOUNTING MACHINE, SLEEVE TYPE WITH DIGITAL CAMERAS
FLEXO PRINTING MACHINES
MAXIFLEX
CENTRAL IMPRESSION FLEXOGRAPHIC PRINTING
MACHINES, SPECIAL FOR QUICK CHANGE OVER FOR SHORT RUNS
JOBS, FROM 620 TO 820 MM WIDTHS, UP TO 10 COLORS
POST-PRESS
LAMINA
SOLVENT LESS LAMINATING MACHINE, FULLY SERVO
DRIVEN, FROM 620 TO 820 MM WIDTHS

5. TMS
SLEEVE TYPE PLATE MOUNTER

6. TMS SLEEVE TYPE
 Print repeat range from 250 to 800mm
 Two digital cameras for microdot
alignment
 Large 20 inch flat monitor for easy global
location of the plate position
 Pneumatic “air float” system for plate
sleeve
 Wireless interface with MaxiFlex press to
send job data of sleeve size and pre register
position (option)

7. Standard Machine
Parameters
 Electrical supply: 1 phase – 230V – 50 Hz
 Machine transportable as one modular unit to minimize
installation
 Compressed air 7-8 bar
 CE Certification
 Standard configuration
 Widths 620, 820 and 1020 mm
 Dimensions
 800Mmm working width – Length 500mm, Width 1200mm,
Height 2100mm

8. TMS - Monitor

9. TMS - Mounting

10. TMS - Sleeve

11. TEKTRONIC
SLEEVE TYPE PLATE MOUNTER

12. Main Specification
 Automatic positioning of the cameras by motors with electronic /
digital encoders according the program
 Up to 20 memory cameras position cross the width
 Movements of cameras over linear ball bearings
 Mandrel rotation by servo motor, with jog movement according to
the program
 Wide touch screen operator panel for machine program
 Multi mount program
 Memory program of jobs
 Chromed sleeve air mandrel 2300 mm sleeve face length
 Notch point on sleeve air mandrel, according to Stork/Rotec
standard
 Mechanical indexing for zero point
 Print repeat range : Min. 520 mm; Max 1100 mmPneumatic
movements for sleeves change
 Dedicated industrial case PC box for 2 cameras management
 Prepared for internet connection in case of service
 Heavy duty main frame

13. Optionals
 Manual tape cutting system across the width
 Electrical movements of the monitor across the width

14. MAXIFLEX

15. MAIN FEATURES
 Central impression flexo printing press designed





for quick job change and short runs jobs
Print Repeat from 250/300 to 600 mm
Widths: from 620 to 1020 mm Up to 10 colours
Quick change with sleeve system on anilox and
plate
Fully equipped with web guides, video inspection
and tension control
Pre setting and automatic pre register with touch
panel

16. STANDARD FEATURES
 Motorized operator register control
 CNC positioning of printing decks
 Mechanical speed 200 m/min.
 Quick sleeves change system for plate cylinder
 Sleeves change system for anilox cylinder
 Unwinder and rewinder max diameter 800 mm.
 Airshaft diameter 3”
 Pneumatic rewinder lay on roller
 Electronic brake for unwinder driven by the load
cell
 CI Drum nip roll
 Precision ground Chromed 1320mm diameter CI
drum for maximum precision

17. MORE FEATURES
 One set of plate and anilox sleeves
 Ink device with chambered doctor blade with
integrated pump
 Printing positions, movements, repeatable registers,
sequential releases
 Intercolor and tunnel hot air drying system dual heat
settings
 Lighting system
 Main operator console with touch control panel
 Remote control
 Safety bodywork construction
 Meter-counter

18. OPTIONAL
 Printing auto pre-register
 Turret unwinder or rewinder d. max reel 500 mm.
 UV drying system (as alternative)
 Slitting system
 Hydraulic system for roll load unload max kg.





1000
Camera for printing inspection
Corona treatment
Exit edge guider
Entry edge guider
Anti-static bars

19. QUICK CHANGE OVER
OF PLATE SLEEVES
AND ANILOX

20. More…….
 Clichè change on machine, without removing the











mandrel
Pneumatic system for clichès sleeve change
Anilox change on machine, without removing the
mandrel
Pnaumatic system for anylox sleeve change
100 mm diameter anilox sleeves
Closed chambered doctor blade with adjustable pressure
Pneumatic ink pump integrated in the colour deck unit
Axial and Up-Down electronic registers
Automatic movements of anilox and clichè with presetting
Horizontal and sequential release of anilox and clichè
Print positions saved and stored
Inter-colours hot drying box with double chamber

21. MAIN CONTROL PANEL
 LCD colour touch screen
 Web tension indicator of
running job
 Meter Counter/Machine
Speed Indicator
 Connection for internet
remote service indicator
 No limit saving jobs

22. LAYOUT OF THE MACHINE

23. QUICK AND EASY TRANSPORT

24. LAMINA

25. Configurations
 It 's a coater/laminator suitable for the production of
laminated flexible packaging that uses solvent-free
adhesive.
 Available in different widths: 620, 820 and 1020 mm.
Reliable and rugged is designed to ensure optimum
functionality related to easy of use and maintenance.
 This machine is completely servo equipped on all reels
shafts including coater and laminator units.
 The settings, thanks to the systems of loading and
unloading of reels, are simplified, since the machine takes
the shifting system, i.e. the centring of the reel, also does
not use shafts, because the system is shaft less.
 The laminating size change by using the sleeves system
directly into the machine.

26. More Configurations
 Max roll diameter 850 mm.
 Servo motors unwinder/rewinder
 Dual dancing rollers for accurate web tension




control with electronic read out.
Tension range, from 1.5 kg Min to 15 kg Max.
76 / 152 mm (3”/ 6”) shaft less core unwinder
Infeed web guide.
Min lamination width 300mm for 620mm
machine and 400mm for 820mm wide machine

27. Standard Configurations Widths 620mm
and 820mm Speed 300 m/min
 Min thickness Materials: BOPP–15mu,PET–





12mu, ALU–15mu,PAP–40gsm, LDPE–20mu, CPP–
25mu
Maximum thickness Materials: CPP–150mu,ALU50mu,LDPE–200mu,PAP–200gsm
Pneumatic “air float” system for transfer roller
sleeve change
Chrome plated coating cylinder
Enclosed cabinet ventilated to minimise adhesive
fumes
Heated adhesive reservoir to ensure optimum
mixing and constant application weight.

28. FULLY SERVO SOLVENT
LESS LAMINATING MACHINE

29. SOLVENT LESS MIXING STATION
The mixing station unit includes two pumps to keep the
filling of the two tanks of the glue and catalyst

30. INDIPENDENT TWO PARTS SOLVENT LESS
MIXING STATION
 The mixer is the most technologically
advaced machine on the market for mixing
and dispensing two parts glue
 The two pumping system are different, as
the fluid to be mixed are characteristically
different
 The method of dispensing of liquids is
carried out by two gear pumps
 The ratio of dispensing is controlled by
inverters, following a proper program

31. LAYOUT DELLA LAMINA

32. MAIN FEATURES OF MIXING STATION
 Platform base with wheels
 Automatic mixing device «gun type» with one use









plastic nozzle
Glue tank with pneumatic pump is included
Catalyst tank with pneumatic pump is included
Two ultrasonic glue level detector
Touch control panel and operating control by PLC
Control of mixing ratio system
Fault signal system in case of no operations pumps
2.5 Mt of heating pipe with thermostat for temperature
setting
2.5 omron controls and plc
Total power: 4 Kw / 220 Volts, single phase

33. MULTIPRESS
Thank you for
your attention!

34. More information
are available by our local agent:
CV. SINARMASINDO
Lead You to the Right Investment
Contact Person:
Mr. Liem Budhi Utomo
BSD Sektor I.6 Blok E5 no.26
Bumi Serpong Damai, Tangerang 15318
Banten, Indonesia
P: +62 21 5373839, 5373526
F: +62 21 5383235
M: +62 812 107 5552
E-mail: machinery@sinarmasindo.com
Skype: budhi_utomo
Website: www.sinarmasindo.com