1. Festa della Fioritura
30 Aprile 2011
Salò
Presenza dei Catari sul Garda
Maria Cristina Piras
2. Multipress is an Italian company which produces
and sells everywhere in the world C. I. flexo
printing machines and auxiliary equipment. We
are based in Ponte San Marco (BS), 100 KMs
east of Milan.
Multipress sold more than 100 machines in
England, In Denmark, in South America, in
Australia, in Russia and in several other
countries.
Our main machines are two:
1.MAXIFLEX.
2.MASTERFLEX.
4. MAXIFLEX
C. I. flexo printing press, designed for quick job change, High tech
level, 4 / 6 / 8 colours, width from 620 up to 820 mm
Standard Configuration
UNWINDER
Max roll diameter 1000 mm.
Unwind with electronic brake servo cooled
Two load cells for reading the web tension
Electronic tension control with set point on display
Unwind with two way direction
Material tension range, from min 2.5 kg a 20 kg. Max.
Housing for expanding shaft with auto lock system
Expanding shaft of 3” or 6”
PRINTING DECK
Cliché sleeve change on machine, without removing the mandrel
Print repeat sizes from 250 to 610 mm
Gear pitch 5 mm
Anilox sleeve change on machine, without removing the mandrel
Closed chambered doctor blade with pneumatic adjustable
movement
Axial and Up-Down electronic registers
5. Automatic movements of anilox and cliché with pre-setting
Horizontal and sequential release of anilox and cliché
Print positions saved and reloaded
Movements on ball system with warm screws
Inter-colours drying box with double chamber
CENTRAL IMPRESSION
Chromed central impression with double chamber
Dynamically balanced
Designed for connection with chiller
Gear with helical teeth with 5 mm pitch
Contact touch roll with pneumatic movement
Brushless servo motor with encoder and brake
TUNNEL BRIDGE
Dryer air boxes with blowing system
3 Blower fans with automatic speed according to the machine speed
Air heating system with electrical haters
Air temperature settable from the pc panel
Motorized chill roll with settable tension from the pc panel
7. MASTERFLEX
C. I. flexo printing press, designed for quick job change, High tech
level, 4 / 6 / 8 colours, width from 620 up to 820 mm
Standard Configuration
STANDARD UNWINDER
PRINTING COLOUR DECK
CENTRAL IMPRESSION
TUNNEL BRIDGE
REWIDER
MAIN PC PANEL
REMOTE CONTROL PANEL
STANDARD MACHINE INCLUDES
STANDARD MACHINE PERFORMANCES
MAIN COMPONENTS ORIGIN
OPTIONALS
8. STANDARD UNWINDER
Max roll diameter 1000 mm.
Unwind with electronic brake servo cooled
Two load cells for reading the web tension
Electronic tension control with set point on display
Unwind with two way direction
Material tension range, from min 2.5 kg a 25 kg. Max.
Housing for expanding shaft with auto lock system
Expanding shaft of 3”
PRINTING COLOUR DECK
Cliché sleeve change on machine, without removing the air shaft
Print repeat sizes from 340 to 750 mm for 8/10 colours version.
Print repeat sizes from 400 to 1000 mm for 4/6 colours version.
Gear pitch 5 mm
Anilox sleeve change on machine, without removing the air shaft
Closed chambered doctor blade with pneumatic adjustable
movement
9. Axial and Up-Down electronic registers
Automatic movements of anilox and cliché with pre-setting
Horizontal and sequential release of anilox and cliché
Print positions saved and reloaded
Movements on ball system with warm ball screws
Inter-colours hot drying box with double chamber
CENTRAL IMPRESSION
200μm chromed central impression
Dynamically balanced
Double chamber for connection with chiller
Gear with helical teeth with 5 mm pitch
Contact touch roll with pneumatic movement
Servo motor with encoder and cooling servo fan
.
10.
11. MULTIPRESS
MULTIPRESS
Strada Statale 11, 126
Strada Statale 11, 126
25010 Ponte San Marco
25010 Ponte San Marco
Calcinato (BS), ITALY
Calcinato (BS), ITALY
Tel. + 39 030-998.03.88
Tel. + 39 030-998.03.88
Fax + 39 030-996.96.86
Fax + 39 030-996.96.86
E-MAIL CONTACTS
E-MAIL CONTACTS
info@multipressflexo.com
info@multipressflexo.com