This document discusses Turbo Oil-Free Compressors for chillers. It notes that magnetic bearings allow for extremely high speeds of up to 200 m/s without lubrication. This results in reliable, low maintenance systems with high efficiency. Applications include replacing old centrifugal chillers or adding backup chillers. The compressors come in a range of sizes from 265-1055 KWc and can be used for both water-cooled and air-cooled systems. Installation involves removing an old compressor and installing the new one along with any necessary piping or electrical work.

1. Turbo Oil-Free Compressor
New Generation Efficient Chiller

2. The Next Generation Chillers

3. Turbo Oil-Less
Compressors
Chilled
Water Heat
Exchanger
Condensing Water
Heat Exchanger

4. Shell & Tube Exchanger

5. Piping

6. HMI-Human Machine Interface Controller

7. Condenser
Water Side
Chilled
Water Side
Chilled Water
Pumps
Cooling Tower
Water Pumps

8. Over View Chillers Plant

10. New Levels of
Performance
with Magnetic
Oil Less Bearings
Turbo Oil-Less
Compressor

11. The concept of magnetic bearings has been around
for at least 100 years. For many of those years,
though, it was the stuff of university experiments and
studies. However, as computing power has improved
so has the viability of using magnetic bearings in
commercial applications

12. The progression in magnetic bearing technology has followed the
evolution of computer technology. The improvement in electronics and
software has enabled better monitoring and control of motion. And
magnetic bearing technology has been both the beneficiary of this
technology improvement as well as the cause of certain applications
becoming more likely to benefit from magnetic bearings. Especially for
industrial machinery, increasingly environmental impact and the cost of
energy are becoming the top priorities. In these applications, magnetic
bearings can provide higher speed operation with greater reliability and
efficiency.

13. Perhaps the greatest benefit of magnetic bearings is their
ability to rotate at extremely high speeds. The bearings
themselves are limited by the strength of the material to a
peripheral speed limit of 180 m/s. For special applications, it
is possible to increase this limit to 200 m/s with more exotic
materials. Another factor is the nearly frictionless
performance of the bearings which is the direct result of the
rotor floating on a contact-free magnetic field. The
elimination of moving mechanical components also means
that there is no lubrication required for the bearing system,
which makes it a very clean system to operate. All of these
factors make magnetic bearings highly reliable, which
drastically reduces maintenance requirements. Magnetic
bearing systems also have low vibration levels even during
high-speed operation, and low audible noise levels.
Main Advantages ‫األهـــــــم‬ ‫الفائــــدة‬

14. Other
Advantages
‫فوائــــد‬
‫أخـــــــري‬

16. Turbo Oil-Free Other Compressors

18. Turbo Oil-Free

24. Chillers are coming in sizes
From: 265 - 1055 KWc

26. KWc 100% 75% 50% 25% SEER L W H KG R-134

27. Integrated
Plant
Package
Cooling
Tower
Control
Chillers

28. Cooling Tower
Power Electrical
Client Point
Connection
Turbo Oil Less
Compressors
Pressurization
Pump & Tank
Complete
Internal Piping
Sand
Filter
GRP
Collection
Tank
Pumps
Chemical Dosing
Connection
Point
Stable
Frame
Design
Reinforced
for Cooling
Towers

29. ‫منظومة‬ ‫عن‬ ‫تستقل‬ ‫أن‬ ‫تريد‬ ‫عندما‬”‫تبريد‬“‫المناطق‬.
When you want to go independent from “Tabreed” District Cooling.
‫المركزى‬ ‫الطرد‬ ‫شيلرات‬ ‫منظومة‬ ‫إستبدال‬ ‫تريد‬ ‫عندما‬.
When decided the replace existing old Centrifugal Chiller
‫المظومة‬ ‫لتعزيز‬ ‫و‬ ‫الطارئة‬ ‫الظروف‬ ‫عند‬.
When urgent need for back-up or during
Emergency
‫الشير‬ ‫من‬ ‫الحالية‬ ‫الكهرباء‬ ‫فواتير‬ ‫تقليل‬ ‫تريد‬ ‫عندما‬‫القائمة‬ ‫ات‬.
When decided to reduce electricity bills & save energy
‫عندما‬‫تبريد‬ ‫بمنظومة‬ ‫مرتبط‬ ‫مجمع‬ ‫ضمن‬ ‫واحد‬ ‫مبنى‬ ‫ينجز‬
When one building constructed among DC-Complex
‫الش‬ ‫لتركيب‬ ‫متاح‬ ‫كاف‬ ‫حيز‬ ‫هناك‬ ‫يكون‬ ‫ال‬ ‫عندما‬‫يرات‬
When there is no enough SPACE for Chillers Plant

30. Air Cooled
Chiller

31. More
Advantages

32. Retrofitting at
Existing Sites
‫اإلستبدال‬ ‫مرونة‬
‫القائمة‬ ‫المشاريع‬ ‫فى‬

33. To Replace Old
Centrifugal or Screw Compressors

34. First Step:
First Step:
Remove Old Centrifugal or Screw
Compressor

35. Fixing
Procedure

36. Piping
Work

37. Fixing
Procedure

38. Compressor
Details

39. Compressors
Base

40. Insulation

41. Add New
Controller

42. Final Fixing

43. ‫بنا‬ ‫تتصل‬ ‫كيف‬How to Call us ?
To benefit from our
Services:
• Consultancies.
• Corrections.
Call:
Eng. Juma Yousef
‫لإلستفـــــــــــادة‬‫من‬
‫خدمــــاتنا‬:
•‫اإلستشارية‬.
•‫التصحيحية‬.
‫اتصل‬:
‫المهندس‬/‫يوسف‬ ‫جمعة‬
+971-50-4948385
jumayjuma@gmail.com