Avery Weigh-Tronix painted steel ProDec floor scale is tough, accurate, affordable and suitable for most industrial weighing applications. The steel top plate is welded to a steel support channel understructure, to keep the scale from warping and bending. The low profile design helps relieve the back strain of repetitive weighing. The scale height is only 3.31 inches on models of 5,000 lb or less, 4.06 inches on 10,000 lb models and 5 inches on 20,000 lb models. This allows for easy-on and easy-off manipulation of carts. Steel support channels welded under the top plate add superior strength and keep decks from warping and bending. The top plate on the deck and ramp surfaces is a safety tread pattern. This non-slip pattern reduces the risk of injuries. ProDecs are placed in the most efficient traffic patterns to utilize more than one weighing situation. The four-way ramp positioning speeds up work flow from any direction. Weigh Bars are another key to the ProDec's popularity. The patented Weigh Bar is made from an aircraft alloy steel bar and is precision tooled in the machine shop at Weigh-Tronix. An in-house gauging process, sealing procedure and testing analysis of each Weigh Bar insures the reliability you get in every ProDec scale. The moisture proof junction box is recessed in the deck with a removable plate for easy access. All Weigh Bar cables are protected inside the deck structure. Design features on the ProDec offer easy access to Weigh Bars and the junction box for servicing. The removable deck plate seals the recessed junction box and lifts off for quick, routine calibration procedures. The ProDec is easy to move. Eye bolts inserted in the pre-fabricated lifting holes enable smooth relocation. Using Weigh Bar technology for outstanding accuracy, the ProDec uses exclusive Weigh Bar weight sensors for accuracy and reliability. The Weigh Bar’s unique design and solid steel milling protects the electronics, allowing greater weighing accuracy without reducing the strength. The Weigh Bar is less prone to damage from impact and vibration, with a lower failure rate than conventional load cells.

1. Leveling leg
access
FM approved
junction box
with access
plate removed
Under deck
channel structure
Leveling leg Weigh Bar weight sensor
(FM approved)
Lifting eye bolt
mounting hole
3⁄16" thick, non-slip
textured top deck
Avery Weigh-Tronix Floor Scales
ProDec
DSL Series Mild
Steel Floor Scale
TechnicalSpecification
DESCRIPTION
General
Since its introduction two decades ago, the ProDec
DSL has become the benchmark for robustness, quality
and affordability. Revered by market insiders for its
impressive craftsmanship, the ProDec is known as the
workhorse of the industry, withstanding many hours of
use with minimal downtime. The high uptime is a key
reason for thousands of ProDec installations at
locations requiring around the clock functionality to
optimize operations while reducing costly downtime.
Design
Low profile design – The height of 3.31 inches on the
5000 lb model, 4.06 inches on the 10,000 lb model and
5 inches on the 20,000 lb model allow for easy loading
and unloading.
Exclusively designed Weigh Bars® – The Weigh Bar
outperforms most shear beam loadcells in accuracy and
reliability. When fitted with a Weigh Bar, the ProDec will
perform as fast, as stable and as accurately in a 5000 lb
setup as it does in a 10,000 lb capacity. This provides
our customers with a higher strength deck and the
flexibility to lower the legal for trade capacity and
resolution without losing accuracy or performance.
Unsurpassed rigidity – The ProDec is engineered to
provide outstanding strength and robustness at all
times with its steel support channel understructure
welded to a 3⁄16" top plate in the 2000/5000 lb capacity
scale while the10,000 lb capacity has a ¼" top plate –
this helps to keep the deck from warping and bending.
Serviceability – Hidden under an easily removable
access plate in the top deck structure, the ProDec's
junction box can be easily accessed for servicing but
remains well protected from damage.
Four-way ramps – Ramps can be placed to speed up
workflow from multiple directions and improve
efficiency for many applications.
Tread plate deck texture – This deck texture pattern
provides higher traction than non-checkered designs
and reduces the risk for slip and fall accidents.
Adjustable feet – The corrosion resistant stainless
steel feet with locking nuts are adjustable and allow for
leveling between 3⁄8" to ½".
End loading – The ProDec is designed to
accommodate some of the most unique weighing
situations. The ProDec has an end loading rating of
200% at a 2000 lb, 150% at 5000 lb and 100% for the
10,000 lb and 20,000 lb.
Axle loading – The ProDec axle load ratings are: 3300
lb for a 5000 lb scale; 5000 lb for 10,000 lb capacity;
and 10,000 lb for 20,000 lb capacity scales.

2. TechnicalSpecification
ProDec Mild Steel Floor Scales
SPECIFICATIONS
Standard sizes, capacities and finishes:
Capacity Model No. Dimensions Powder Paint Urethane Finish
2000 / 5000 lb
(1000 / 2500 kg)
DSL3030-05 30 x 30 x 3.31 in (76 x 76 x 8.4 cm) ■
DSL3636-05 36 x 36 x 3.31 in (91 x 91 x 8.4 cm) ■
DSL4848-05 48 x 48 x 3.31 in (122 x 122 x 8.4 cm) ■
DSL6048-05 60 x 48 x 3.31 in (152 x 122 x 8.4 cm) ■
DSL7248-05 72 x 48 x 3.31 in (186 x 122 x 8.4 cm) ■
DSL9648-05 96 X 48 X 3.31 in (244 x 122 x 8.4 cm) ■
DSL6060-05 60 x 60 x 3.31 in (152 x 152 x 8.4 cm) ■
5000 / 10,000 lb
(2,500 / 5000 kg)
DSL4848-10 48 x 48 x 4.06 in (122 x 122 x 10.3 cm) ■
DSL6048-10 60 x 48 x 4.06 in (152 x 122 x 10.3 cm) ■
DSL7248-10 72 x 48 x 4.06 in (183 x 122 x 10.3 cm) ■
DSL9648-10 96 X 48 X 3.31 in (244 x 122 x 10.3 cm) ■
DSL6060-10 60 x 60 x 4.06 in (152 x 152 x 10.3 cm) ■
DSL7260-10 72 x 60 x 4.06 in (183 x 152 x 10.3 cm) ■
DSL8460-10 84 x 60 x 4.06 in (213 x 152 x 10.3 cm) ■
DSL7272-10 72 X 72 X 4.06 in (183 x 183 x 10.3cm) ■
DSL8472-10 84 x 72 x 4.06 in (213 x 183 x 10.3 cm) ■
DSL9672-10 96 x 72 x 4.06 in (244 x 183 x 10.3 cm) ■
10,000 / 20,000 lb
(5000 / 10,000 kg)
DSL6060-20 60 x 60 x 5.00 in (152 x 152 x 12.7 cm) ■
DSL8460-20 84 x 60 x 5.00 in (213 x 152 x 12.7 cm) ■
DSL9672-20 96 x 72 x 5.00 in (244 x 183 x 12.7 cm) ■
Construction: Welded support channels. All cables protected
within the deck to eliminate potential damage to wiring.
2000/5000 lb capacity: 3⁄16" top plate
10,000 lb capacity: ¼" top plate
Lifting positions: 48" or less – 1 lifting eye on each of the
two short sides of the scale. Over 48" – 2 lifting eyes each
on each of the two short side of the scale
Lifting eye size: .50-13 UNC
Weight sensors: Four Weigh Bars
Weigh Bar output:
2000 lb capacity: 0.54 mv/v
5000 lb, 10,000 lb and 20,000 lb capacity: 1.35 mv/v
Overload protection: 150%
End loading: The end load ratings vary by capacity: 200%
at 2000 lb, 150% at 5000 lb, and 100% for the 10,000 lb
and 20,000 lb capacities.
Accuracy: Meets or exceeds NTEP Class III 5000 division
accuracy
Temperature: 14° to 104°F (-10° to 40°C)
Interface cable: 5 or 10 ft cable included
Agencies:
NTEP Certificate of Conformance #90-132
Factory Mutual (FM) approved Weigh Bars and junction
box. When connected to a GSE 350 Indicator, the ProDec
provides a Factory Mutual approved system for Class I, II,
III; Divisions 1 & 2; Groups A, B, V D, E, F, G.
Canadian Weights and Measures
Shipping weights:
Model No. Mild Steel
DSL3030-05 176 lb (80 kg)
DSL3636-05 223 lb (101 kg)
DSL4848-05 338 lb (154 kg)
DSL6048-05 391 lb (178 kg)
DSL7248-05 456 lb (207 kg)
DSL6060-05 484 lb (220 kg)
DSL4848-10 491 lb (223 kg)
DSL6048-10 566 lb (257 kg)
DSL7248-10 641 lb (291 kg)
DSL6060-10 679 lb (309 kg)
DSL7260-10 772 lb (351 kg)
DSL8460-10 910 lb (414 kg)
DSL8472-10 1027 lb (467 kg)
DSL9672-10 1133 lb (515 kg)
DSL6060-20 850 lb (385 kg)
DSL8460-20 1140 lb (517 kg)
DSL9672-20 1420 lb (644 kg)
© Avery Weigh-Tronix group of companies 2013. All rights reserved. Avery Weigh-Tronix is a registered trademark of the Avery Weigh-Tronix group of
companies. This publication is issued to provide outline information only which, unless agreed by an Avery Weigh-Tronix group company in writing, may
not be regarded as a representation relating to the products or services concerned. This publication was correct at the time of going to print however,
Avery Weigh-Tronix reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time.
www.averyweigh-tronix.com
Avery Weigh-Tronix is an ITW company
ProDec_spec_500476.indd (C&D)
05/2013 AWT35-500476
Central Carolina Scale, Inc
Sanford, NC
Call (919) 776-7737
http://www.centralcarolinascale.com