Twin City Hose is a leading global manufacturer and supplier of corrugated flexible metal hose, metal braided connectors and expansion joints including rubber, metal and PTFE.
1. Externally
Pressurized EJ
OUTLINE
Flexible Metal Hose
V and U Connectors
Expansion Compensators
Metal Expansion Joints Pump Connectors
Rubber Expansion Joints Pipe Guides and Slides Accessory Adapters
Reducing Metal Hose Bellow Pump Connectors Custom Fabrication
PRODUCT LINE TRAINING
UL® Classified
2. PRODUCT LINE TRAINING
UL® CLASSIFIED
V’s, U’s and Straight Flexible Connectors
Hose and Braid Materials:
Hose:
• Corrugated Bronze
• Corrugated Stainless Steel
Braid:
• Bronze Wire Braid
• Stainless Steel Wire Braid
Braid Collar:
• Bronze
• Stainless Steel
End Fittings:
Types Available:
• Weld
• Male
• Sweat
• Flange
• Groove
Materials:
• Copper
• Carbon Steel
• Stainless Steel
Sizes:
• ½” – 12” I.D. available
• 2”, 3”, 4” and 6” movements
for V and U flex connectors
• 30” maximum OAL for
straight flex connectors
3. PRODUCT LINE TRAINING
METAL HOSE
Metal hose is a length of tubing made flexible by means of convolutions, so that it may
be readily bent, but remain liquid and gas tight.
Temperature
Pressure
Temperature
Pressure
• Noise control
• Vibration absorption
• Compensates for misalignment
of pipes or equipment
4. PUMP CONNECTORS
Pump connectors are designed to
meet these needs in a piping system:
• System forces
• Dampen noise
• Compensation
• Absorb vibration
• Accommodate misalignment
Pump connectors CAN NOT be used
for thermal expansion applications.
Model TCHS and TCHB
Sizes 1/4” - 24” and custom
PSIG and Temperature varies with materials
PRODUCT LINE TRAINING
5. REDUCING ASSEMBLIES
Model RC
Sizes 1 1/4” - 12” and custom
PSIG and Temperature varies with materials
Fabricating the Reducing Pump Connector Assembly
Constructed the same way a standard pump connector is, with the exception of:
• The addition of a reducing piece between the collar and the end fitting
PRODUCT LINE TRAINING
6. PUMP CONNECTORS AND REDUCING ASSEMBLIES
Accessory adapter ports that can be included
on your reducer, allowing up to four ports for:
• Drains
• P/T Ports
• Gauge Cocks
• Thermo Wells
PRODUCT LINE TRAINING
7. PUMP CONNECTORS AND REDUCING ASSEMBLIES
Advantages
• Excellent in high temperature
and pressure applications
• The best in high corrosive
media applications
• Shelf and service life is
longer than rubber
• No control rods needed, braid
is the growth restriction
• Any type of end fittings possible
PRODUCT LINE TRAINING
8. METAL HEAT PUMP HOSE
Advantages
• 100% tested
• Made in the USA
• Custom and metal heat pump
hose assemblies are available
• All stainless steel construction
• Higher temperature and PSI ratings
compared to EPDM heat pump hose
PRODUCT LINE TRAINING
9. Model V90 AND S90
Sizes Custom
PSIG and Temperature varies with materials
V and U Connectors CAN be used
for thermal expansion applications
V and U Advantages:
• Nesting
• Seismic
• Hangers
• Drain Ports
• Thermal Expansion
and Contraction
• Unlimited Material
and Fitting Configurations
SEISMIC VAND U CONNECTORS
PRODUCT LINE TRAINING
360 directional change
Smaller foot print
180 directional change
Larger foot print
10. SEISMIC VAND U CONNECTORS
V and U Connectors are able to
absorb movement along three planes
• Axial
• Vertical
• Horizontal
PRODUCT LINE TRAINING
11. RUBBER EXPANSION JOINTS
Construction
Tube : The inner lining of the expansion joint
Cover : The exterior part of the expansion joint
• Tube and cover are made from the same elastomer
Carcass / Body : Consists of fabric or metal wire reinforcement
• Control rods must be used in higher pressure applications
• End fittings can be carbon or stainless steel ( #150 or #300 )
PRODUCT LINE TRAINING
Materials
• Butyl
• Viton
• EPDM
• Nitrile
• Neoprene
• Custom
Applications
• Marine
• Waste Water
• Pulp Systems
• Power Systems
• Next to mechanical equipment
• Can NOT BE used in petroleum
based applications
Advantages
• Noise control
• Cost efficient
• Misalignment
• Thermal growth
• Vibration absorption
• Protects against surge forces
12. RUBBER EXPANSION
JOINT SELECTIONS
Single Sphere Rubber Expansion Joint
Model MS1
Sizes 1 1/2” - 24”
PSIG 225 Max
Temperature
300ºF Max
Double Sphere Rubber Expansion Joint
Model MS2
Sizes 1 1/2” - 24”
PSIG 225 Max
Temperature 300ºF Max
Female Union Rubber Expansion Joint
Model MSFU
Sizes 3/4” - 3”
PSIG 225 Max
Temperature 300ºF Max
Specifications:
• 7/8” Compression and 1/4” Extension
PRODUCT LINE TRAINING
13. RUBBER EXPANSION
JOINT SELECTIONS
• Control rods are
recommended for
rubber expansion joints
Spool Piece Rubber Expansion Joint
Model S1
• Hand built to your specifications
of movement, size and PSI.
• TCH also has stock units available
PRODUCT LINE TRAINING
Retaining Rings
Galvanized
SS 304 and 316
are available
Can meet the Buy American Act
or complete domestic product
14. Model EXC
Sizes 3/4” - 4”
PSIG 200 Max
Temperature 750ºF Max
EXPANSION JOINT COMPENSATORS
PRODUCT LINE TRAINING
End fittings to
match the system
• Weld
• Sweat
• Flange
• Thread
• Grooved
• Custom
Features
• Internal anti-torque device
• Expansion compensator absorb
axial pipe motion in smaller diameter
systems, similar to high pressure
risers and low pressure baseboards
• Standard movement per compensator
is 2” total axial movement
• Takes up minimal space in tight
mechanical areas in-line with system
15. Model TFEP
Sizes 3” - 48”
PSIG 300 Max
Temperature 650ºF Max
Features
• Take up less space
than a pipe loop
• No packing equals
no maintenance at all
• Externally pressurized
expansion joints absorb
axial pipe motion in large
diameter systems
• Internal anti-torque device
and limit stop device
Standard movement:
4” Compression and 3/4” Extension (short)
8” Compression and 1 1/2” Extension (long)
EXTERNALLY PRESSURIZED
EXPANSION JOINTS
PRODUCT LINE TRAINING
End fittings to
match the system
• Weld
• Sweat
• Flange
• Thread
• Grooved
• Custom
16. Model MPB and MPBR
Sizes 3” - 16”
PSIG 22A5 Max
Temperature 360ºF Max
Construction
Multi-Ply stainless steel bellows
Integral part of carbon steel flanges
are limit rods, nuts and cotter pins
Larger sizes are available by special order
• Standard movement:
MPB : 1/2” Compression 1/8” Extension 1/8“ Offset
MPBR : 1” Compression 1/8” Extension 1/8” to 1/4” Offset
MPBR is the metal version of the Single Sphere Rubber Expansion Joint
MULTIPLY BELLOWS
PRODUCT LINE TRAINING
17. CUSTOM FABRICATION
Custom Fabricated Product Line
• Compensators
• Pump Connectors
• V and U Connectors
• Metal Expansion Joints
• Rubber Expansion Joints
• Flexible Braided Metal Hose
Custom Options
• End Fittings
• Over All Length (OAL)
• Pressure Capabilities
• Overall Diameter (OD)
• Media Capabilities
• Correct application
product consulting
PRODUCT LINE TRAINING
Twin City Hose Capabilities
• Welding Shop
• Fabrication Shop
• Stock Warehouse
• Materials Warehouse
• Product Testing Shop
• Product Cleaning Shop
18. PTFE EXPANSION JOINTS
Model T
Sizes 1.5” - 24”
PSI 200 Max
Temperature 350ºF Max
Features
• Integral steel limit control bolts
• Available in two, three, or five bellow styles
• Corrosion resistant and avoids build up of solids
• Absorb vibration and allow for thermal
movement and misalignment in piping
PRODUCT LINE TRAINING
19. ACCESSORY ADAPTERS
Model F and RF
Sizes 2” - 8” and larger custom sizes
Accessory adapters are the piping solution to
complicated piping arrangements found at larger
air handlers and heating and cooling coils, even
when the coil is larger than the coil connection itself.
• No field guess work
• End fittings must be specified
• Constructed from Sch. 40 pipe
• Ports can be sized ¼”, ½” and ¾”
• Port location and quantity must be specified
PRODUCT LINE TRAINING
Reducing
Straight
20. TYPES OF PIPE GUIDES
Spider Guides
• Can be insulated
• Not designed to handle support loads
• Designed to guide pipe to expansion joint
Insulated Slides
• Designed to guide pipe to expansion joint
• Not designed to handle support loads
PRODUCT LINE TRAINING
Model Pipe Guides
And Slides
Sizes 1/2” - 24”
Features
• Designed to facilitate
the thermal expansion
of a pipeline so that the
axial movement is
properly directed to
the expansion joint
• Prevent buckling
or squirming of the
piping system
• Proper guiding and
anchoring are essential
to the proper function
of expansion joints