ParaRigging is a life and death process. I've spent over 3 years researching, validating and bringing proven BEST PRACTICE solutions around ParaRigging to the industry so you can be confident your chutes are ALWAYS READY, ALWAYS SECURE. Contact me today if you'd like to learn about how we bring BEST PRACTICES to your operations!
2. RIGGING TABLES
New rigging tables can be put on mobile carriages to
move them all towards the wall when not in use,
opening up space for when containers come.
Tables will have Spacesaver drawers at either end and
in the middle for tools and extra supplies.
3. UNPACKED PARACHUTES
One solution: Unpacked chutes could be
stored under tables on roller shelves with
perforated doors.
BEFORE:
Unpacked chutes
stored on floor
5. Parachute Racks allow infinite adjustability of arms
to accommodate varied chute sizes/types
Note: Arms can be
adjusted on 6”
increments vertically
6. Some chutes need a wider base on arms so
that too much tension isn’t put on parts
Note: This part on
the chute can get
damaged if too much
pressure is put on it
while hanging so two
rods tied together
support it better.
7. PACKED
CHUTES
READY TO
DEPLOY
AFTER:
Stored in Parachute Containers designed to go
directly to the field and provide secured storage. All
containers can be locked with padlock.
BEFORE: Stored in linen carts
8. UNIVERSAL
STORAGE
CONTAINER
• Durable, user-friendly container can
be used to store a variety of gear:
• Chem Bio Protective Gear & Gas
Masks
• HAZMAT Suits
• Decon Accessories
• Fire Hoses & Extinguishers
• Parachute Container
• Parachute capacity corresponds to
number of jump seats
• Eliminates risk of snagging
parachutes on wire baskets
9. Container Labeling for Identification and
Inventory
Future
orders can
start at next
number in
series
10. Fork lift
pockets on
all 4 sides.
Reinforced in case
fork lifts miss their
target. Won’t
damage container or
contents.
19. Mobile System with TouchPad access eliminates need for cage, providing greater
control over stored items and more space for working
20. TouchPad Mobile Systems with
pin code access ensures
equipment is not tampered
with and who has access to
inventory
21. Cargo chutes or additional supplies can be stored
on RaptorRAC built into the design of the system.
22. Spacesaver Additional Solutions & Partners
• Helmets and NVG Storage
• Personal Gear Lockers
• Parachute Inventory and Tracking Systems
• Drying Towers
• Target Lights
• Jumping Simulators for T-11’s
23. ControLOC Technology
Unattended access (no keys required).
Electro-mechanical locks accessed using PIN or Card.
Trace/track door on
transitions.
Fully welded double door
construction.
Multi-point locking systems on all doors.
25. Parachute Inventory & tracking system
• Smart Track Inventory System
• Replaces all paperwork with electronic inventories
• Tracks who packed which chutes at what times and where that chute
is in the process
• Halo Lens – goggles that light up what you are looking for down to the bin to
the chute
• Ability to locate chutes packed by a specific person if needed
27. Other . . .
• Partners for lights for jump targets
• New simulator for practicing jumps around T-11’s
28. Spacesaver Corporation
For more information or a no-cost, no-obligation assessment of your own rigging operations, please contact:
Jane Glass-Waldron
Director of Strategic Business Development
Cell: 920-342-6823
Email: jglass@Spacesaver.com