More Related Content
Similar to Wooden Bridge Project - Build with Measured Pieces and Masking Tape
Similar to Wooden Bridge Project - Build with Measured Pieces and Masking Tape (20)
Wooden Bridge Project - Build with Measured Pieces and Masking Tape
- 2. Materials – 8 pieces of wood, glue, cutters, masking tape and a ruler
- 3. Cut 2 pieces - 45 cm, 2 pieces - 35 cm and 4 pieces - 7 cm
- 4. Measure in 5 cm from the ends of each 45 cm piece and draw a reference line.
- 8. Carefully pick up the bridge frame and flip it over and appply tape to the other side.
- 9. Then you are to divide the sides into equal sections and cut and dry fit them beforee you glue them.
- 12. When cutting the angle for the endsplace the bridge on top of the wood and scribe the angle.
- 13. Make sure the cut these pieces a little longer and sand them if needed.
- 14. Now, use the bridge frame to scribe the angles for the interior pieces.
- 18. With one partner holding the sides upright, place the bottom pieces and then top pieces while using the tape to hold the sides together.
- 19. Once you have glued in all of the connecting braces, you can add pieces to the design.