JSO Wood Products has been serving woodworking professionals and novices since 1995. Our company that provides domestic and exotic wood veneers, veneered panels and edgebanding products to several types of customers.

1. steve@jsowoodproducts.com
How To Apply Edge
Banding?

2. Edge banding is a
strip of wood veneer
with heat sensitive
adhesive on one side.
Check out how you
can apply veneer edge
banding on any
material

3. Step 1: clean up the edges
Remove the screw and other obstructions before sanding the
block.
Step 2: iron on the edge banding
Ironing down the edge banding to bond it to the plywood will make
the plywood sit firmly.

4. Changes through the Years
Step 3: press it while it is hot
Use a wooden block to press the hot veneer so that the glue bonds
tightly. Heat those spots again and again.
Step 4: slice off the ends
Place the end against a solid surface and then cut off the ends carefully.
Be gentle while doing this step.

5. Changes through the Years
Step 5: use a trimmer on the edges
This is the quickest and the easiest way to trim
the edge. Make use of a special edge banding tool
Step 6: modify your trimmer
Veneer shims make the first trimmer pass less likely to mar and bend
the edges of the banding.

6. Changes through the Years
Step 7: do not leave a splice where
it will show
Put splices in less visibility spots.
Step 8: touch up with a sanding
block
Sand edges with 150 grit paper.