PP2000/LEXIA-3 Interface latest version, works for both Citreon and Peugeot! Dealer diagnostic scanner for comprehensive Citroen and Peugeot cars diagnostic. You can do all as a authorized dealer does.

1. PP2000/LEXIA-3 Interface works with both
Citroen and Peugeot
OBDII Lexia-3 Citroen/Peugeot Diagnostic contains 30pin old line, total 6
lines
Peugeot PP2000 for querying , management function, programming and diagnosing,
etc.
Citroen PORXIA3, supports all models of Citroen, for programming, matching,
diagnosing, etc.
Latest software support testing all 2012 vehicles models, support the Peugeot
508
Test systems: Engine, automatic transmission, air conditioning system, SRS,
ABS, ASR, MPL, GM, anti-theft system, OBD-II system, and so on.
Testing functions: read fault codes, clear the fault code, dynamic data
stream , computer matching program, component testing, etc. It is the
maintenance of Peugeot-Citroen car best helper

2. Latest software version :
Citroen Lexia V48
Peugeot PP2000 V25 (11A)
Diagbox V6.01 Software
Latest DIAGBOX 3 in 1 software, support testing the latest models
DIAGBOX diagnosis system is Citroen and Peugeot universal of next-generation
diagnosis program, it contains Diagbox, PPS, and LEXIA three sets diagnosis
program, basically covers all Peugeot and Citroen models.
Peugeot models: 106、107、205、206、207、 306、307、308、309、405、408、407、
408、508、605、607、806、807、1007、3008、4007、5008、 ion、HOGGAR、RCZ、
BIPPER、PARTNRT、EXPERT、BOXER etc.
Citroen cars: CITROEN, Elysee,C-QUATRE, Picasso, Xsara and C-Triomphe ,AX、ZX、
XM、BERLINGO、C1、C2、C3、C4、C5、C6、C8、C15、DS3、DS4、DS5, and so on.
Software update: upgrade free 1 year by CD or Email
Multi-language Support:
1.English, 2.German, 3. French, 4. Japanese, 5. Russian, 6. Spanish, 7.
Portuguese,
8. Swedish, 9. Turkish, 10. Dutch, 11. Polish, 12. Italian, 13. Hungary, 14.
Greek, 15. Czech
Suggestion system: Windows XP

3. Supported Functions
Unlike other universal car scanner tools which only read fault codes,
this software performs nearly ALL the functions like the original
dealer diagnostic tool. Our diagnostic interface contains K-Line
multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
The following diagnostic functions are supported:
1. Read identification
Displays complete identification of control unit, e.g. part number,
software/hardware version, manufacturer, etc...
2. Read fault codes
Displays all stored and pending fault codes with complete
description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.
3. Clear fault codes
This function clears all stored fault codes and other diagnostic

4. information.
4. Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and
reads all diagnostic fault codes.
5. Measured Values
Program displays live Data like Engine Speed, Battery voltage,
Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in
graph, 9 values at once, or full listing (all measured values).
Logging to file is also supported, which allows offline analysis.
6. Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump,
lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)
7. Programming functions/Adaptation
This feature is of great importance in all vehicles because systems
like Engine control units, Immobilizers, Airbags, Alarms, Body
Control Units, and some others, require you to perform reset or

5. programming procedures after car repair is done, or even
configuration after replacing broken Control Unit.
Compatible Vehicles
1. Citroen cars including, C1,C2,C3,C4,C6,C8,CCROSSER,NEMO,BERLINGO,JUMPY,JUMPER,AX,SAXO,BX and so on. But please
pay attention, according to our customer's experience, this item can
not works good at C5 models.
2. Most Peugeot cars from 1995, but it can not work well with
Peugeot 307.
If you has these two types of cars, please pay attention. Please
check with us first before purchase.
Diagnostics is performed via OBD-II connector (which is located near
steering wheel) or via manufacturer-specific connector (only older
cars, pre-2001).
Peugeot Bipper
Peugeot Boxer III
Peugeot Boxer III minibus
Citroen Nemo
Citroen Jumper III
Citroen Jumper III minibus
Description
PP2000/LEXIA-3 Interface latest version, works for both Citreon and
Peugeot!
Dealer diagnostic scanner for comprehensive Citroen and Peugeot cars
diagnostic. You can do all as a authorized dealer does.
This diagnostics software allows you to perform complete diagnostics
of all from 1995 untill present models. Diagnostics is performed via
OBD-II connector (which is located near steering wheel) or via

6. manufacturer-specific connector (only older cars, pre-2001).
This item 100% works fine. It is tested by tens of users.
NOTE: Please don't try to disassemble the machine. No warranty if
the machine is disassembled!
Hardware and software requirements
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB
RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and
Microsoft Windows 98/2000/XP with the latest service pack installed.
If customer requires, we can prepare ready to
Packing List
1pc x Main unit with extension OBD2 cable
1pc x Long 9pin to USB cable

7. 1pc x Short 9pin to USB cable
1pc x OBD2 cable
1pc x 16pin to Clip Cable
1pc x 30pin old Cable
1pc x Instructions for Installation and Activation DVD for PP2000
FAQ
Q: What is the way to do more cars?
A: You can choose the S.1279 module of PPS2000 Lexia-3 Citroen
Peugeot and use with lexia-3 together. Then it can do more cars you
want.
Instruction for Installation and Activation for PP2000
GO TO YOUR COMPUTER'S CONTROL PANEL
SET THE AREA/LANGUAGE TO USA/ENGLISH
START THE INSTALLATION
Activate after installation. The Key Gun is included in the software
http://www.obdii.co.uk/car-diagnostictools-c-2/for-lexia-pp2000