This document provides information on various dental implant products including:
- Bone grafting and sinus lift instruments for preparing implant sites and delivering bone particles.
- Mills, scrapers and carriers for collecting and transferring bone grafts.
- Periotomes, elevators and probes for examining tissues and removing teeth.
- Measurement devices like calipers, parallelers and gauges.
- Curettes, scalers and probes for periodontal maintenance.
- Titanium instruments for various procedures like implant placement and removal of temporary superstructures.
2. Individual Parts
101100
No. 30166
Main Body / Joint (ø10mm & ø11mm Tapered) / Filter (5 ea.) / Sterilization Case
No. Description
30168 Main Body
30172 Filter (5 ea.)
*Material / PP (Black part of filter)
*Choose the aspirator of your choice and "Joint ø11mm with Tapered" from P.97.
Aspirator
Joint ø11mm with Tapered
Sold Separately
*Size / 26 x 17mm (Slot)
*Material / Radel R (Base)
Bakelite (Black part of handle)
*Able to comminute 0.1 to 1.0mm.
*Ideal size mill for dental implantology.
*Able to comminute hard mandibular
bone by sharp grinding blade.
*Size / ø30 x 50mm (Main body)
10 x 10mm (Slot)
-ex-2-
-Mini Barrel-
*Titanium
No. 30480
No. 30481
*Able to comminute 0.1 to 1.0mm.
*Ratchet structure offers to comminute bones in just
light power.
*Simple structure makes shorten your time for the
preparation and cleaning of the operation.
No. 30173
*Titanium
Inside diameter / ø36mm
Multi Collector Kit Type-2 Bone Mill
Contents
Graft Dish
Name of Parts
Name of Parts
Shaft locking
screw
Grinding drum
Drum fixing pin Grinding drum shaft
Stainless Cup
Pusher
Base
Slot
Grinding
drum
Handle
Spacer
Pusher
Slot
Cylinder0.3mm
Ratchet handle
No. 30495
(3 ea.)
Bone Scraper Type-2
Size / 155mm
*Collect own born like shaving allows less surgical invasive.
*Clear body allows how much you scraped own born inside to be visible.
*Suitable angle of the tip part allows easy to scrape bone.
*Capacity / approx. 1cc
*Width of blade / 6.4mm
*Material / TPX
3. 103102
4.0mm
3.2mm
3.2mm
4.0mm
5.6mm
7.0mm
3.2mm
4.0mm
M
No. 30177
S
No. 30178
*For delivering bone particles to grafting area.
6.2mm
14mm 10mm
5.5mm
20mm
0.7mm
6.2mm
14mm
*Smooth edges to prevent Schneider's membrane from damages.
*Easy control angle design.
*Suitable for searching bone deeper inside maxillary sinus.
#A1
No. 30021
#A2
No. 30022
#A3
No. 30023
#B1
No. 30031
#B2
No. 30032
#B3
No. 30033
#B4
No. 30034
#B5
No. 30035
#B6
No. 30036
#B7
No. 30037
4.4mm
10.0mm
8.0mm
4.0mm
4.4mm
10.0mm
4.4mm
10.0mm
Sinus Lift Instrument
Bone Spoon
No. 30020
*Used to mark on the gum before cut.
1.4mm
Dissector
No. Description
Diameter
(mm)
Capacity
(cc)
30462 ø2.9 ø2.9 0.02
30463 ø3.4 ø3.4 0.03
Graft Carrier
*Used for transfering of a autologous bone or an artificial bone under implant treatment.
4. 105104
*Able to operate extraction with minimum damage to surrounding periodontal tissues.
*Excellent for immediate implantation.
#1
Anterior
#2
Anterior
#3
Posterior
P-A (ø8mm)
P-D (ø14mm)
No. Description
30016 Point #1
30017 Point #2
30018 Point #3
10204 P-D Handle
10201 P-A Handle
No. 30003
*For measuring bone width.
*Able to measure up to 20mm.
Size / 140mm
*Suitable for root canal treatment, accurate examination before
placing an implant, checking of calculus quantity and its area.
No. 21122
*With a thin spear-like tip can insert in narrow
p er i o do nt al membr ane c av it y easily, and
periodontal ligament fibers are cut and it exfoliates.
*Excellent for immediate implantation.
3.7mm
No. 21157
Sleeve Gauge
(1mm by 1mm with hold line every 5mm)
- How to use -
*Size / W38 x D48 x H8.5mm (Sleeve)
W33 x D45mm (Gauge)
*Material / Si (Sleeve)
Sleeve (2 ea.) / Gauge (2 ea.)
-Handle-
-Point-
1.7mm
1.7m
m
2.7mm
Periotome Bone Calipers
Elevator
X-Ray Gauge
Parallel Meter
Contents
①スリーブの中に、②X線ゲージ
③X線フィルムを装着して使用します。
① ② ③
-B Handle Spear- *Since this product is an
instrument which cuts a
periodontal ligament and
carries out extrusion of a
tooth by wedge action, the
blade is very thin. Therefore,
p l e a s e d o n o t p e r f o r m
operation in which a root is
raised by leverage, there are
possibility of the breakage of
blade and fear of distortion.
OK
NG
No. 30496
*Used for implant placement or clenching screw.*Able to measure up to 20mm.
*Small head and rachet mechanism offers easy operation in the mouth.
*Compatible head spec: 4 mm suqare
*Head diameter / ø10mm
Ratchet Wrench
#1S
No. 16141
#1C
No. 16144
#1R
No. 16147
#2
No. 16145
#3
No. 16146
*The curve of the tip can approach the
“molar” smoothly.
[ #1C (Curve) ] [ #1R (Reverse) ]
*Inside curve of the tip can approach the end of
molar, lingual and palate side.
[ #2 #3 ]
*This curved shape of a shank is suitably effective
for “molar” to approach with ease.
*The tip is positioned on the extended line of
the handle for handling balance. It makes Dr,s
comfortable to keep the balance of operation.
5. 107106
#5 Titanium
No. 09575
#5-7
Anterior / Posterior
(Lingual surface / Buccal surface)
No. 30160
#11-12
Posterior
(Mesial surface)
No. 30161
#13-14
Anterior
(Distal surface)
No. 30162
#1
Anterior
(Interproximal area / Cervical area)
No. 30163
#2
Anterior / Posterior
(Mesial surface / Distal surface)
No. 30164*Tip is not edged so that an implant may not be damaged.
*Titanium
*Titanium
*Titanium
*Tip is not edged so that an implant may not be damaged.
Periodontal Color Probe Tip (Replaceable Type)
Maintenance Curette
Periodontal Probe
Maintenance Scaler
#2
No. 23522
#4
No. 23524
#5
No. 23525
Octagonal
No. 13121
-Handle-
-Tip (5 ea.)-
*Material / PPSU
a scale a scale
Main body
*It's difficult to come off and remain long,
because of the laser marking permeates
inside the resin body.
*A probe made of the resin prevents implant and a prosthesis being damaged.
*Black and yellow color combination offers easy distinction of the scale.
*Because of the external diameter is only φ0.45mm, this product can reduce the burdens to periodontium.
SC
No. 13127
YS
No. 13128
Titanium
No. 13130
6. 108
*Used for removal of the superstructure of temporary cementation dental implant.
M-HR 30
Upper
No. 30490
M-HR 60
Lower
No. 30491
[Fabrication of the superstructure]
- How to use -
*Form the slot (1.5mm x 0.6mm)
for inserting of the tip at the
margin area.
1) Insert the tip into the slot. 2) Twist the tip slowly. 3) An outside crown and an inner cap
dissociate and an outside crown comes
up perpendicularly.
[Removal of the superstructure]
Implant Remover
0.6mm
1.5mm
30°
60°
1.5mm
0.6mm
