This document provides information on several dental products from DMG America LLC, including Icon caries infiltration treatment, Honigum Pro impression material, StatusBlue impression material, LuxaCore Z-Dual and LuxaCore Dual core build-up materials, LuxaPost posts, Luxatemp Ultra and Luxatemp Plus provisional materials, TempoCem temporary cements, PermaCem cement, Vitique cement, LuxaBond and Contax bonding agents, Ionosit base liner, LuxaBite bite registration material, O-Bite bite registration material, ClearShield fluoride varnish, and Kolorz prophylaxis paste and fluoride foam. It includes descriptions of the products' features and
1. DMG America LLC
242 South Dean Street
Englewood, NJ 07631
1-800-662-6383
www.dmg-america.com
A M E R I C A
Product Review
2. Icon โ The revolutionary treatment for incipient
caries and white spotsโฆwithout drilling!
Caries infiltration is a breakthrough in microinvasive technology that fills,
reinforces, and stabilizes demineralized enamel without drilling or sacrificing
healthy tooth structure. When a dentist discovers incipient caries that are
beyond preventive therapies, though too early for restorative treatment, Icon
offers a simple alternative to theโwait and seeโapproach. Icon inhibits lesion
progression and increases the life expectancy for the tooth while providing a
highly esthetic alternative to microabrasion and other restorative treatments for
cariogenic white spot lesions. Icon is available in a mini-kit with two treatment
units or a cube of seven units for both proximal and smooth surface treatments.
DMG America LLC, 242 South Dean Street, Englewood, NJ 07631
Infiltrants
3. Infiltrants
Icon
The Icon revolution is here!
โข Arrests progression of early carious lesions
โข Removes carious white spot lesions
โข Just one visitโฆ no drilling, no anesthesia!
Photos courtesy of Dr. Timothy A. Hess, DDS, Auburn WA
Before
After
Call 1-800-662-6383 or visit www.dmg-america.com
Ordering Information
See inside back cover
4. Honigum Pro
Introducing Honigum Pro
Powered by GPS technology
โข The only impression material with Directional Intelligenceโข
โข Exhibits dynamic viscosity when placed under pressure
โข Flexible working time with rapid snap-set formulation
โข A complete and comprehensive system for all
your impression needs
Honigum Pro is the next generation of outcome-enhancing impression materials for
the most accurate impressions possible. Powered by GPS Technology, this proprietary
VPS formulation is engineered to find its way into tiny crevices and hard-to-reach areas
in the mouth via its superior sheer-thinning capability, providing for impressions of
unmatched accuracy. Prior to insertion into the mouth, the Flexible Working Time
formulation provides you with greater control. Once in the mouth, the extreme
hydrophilicity and rapid snap-set help to drastically reduce voids, impression errors and
micro-movement distortions. Plus, the subtle honey aroma makes for a more patient-
friendly procedure without causing over-salivation. To take the sharpest, cleanest and
most accurate impression, take a moment to ask your Authorized DMG America dealer
representative about new Honigum Pro with GPS Technology. Honigum Pro is available
in Heavy, Heavy QuadFast , Mono, Putty, Light and Light QuadFast viscosities.
DMG America LLC, 242 South Dean Street, Englewood, NJ 07631
ImpressionMaterials
5. StatusBlue
A fast and easy VPS alginate
replacement material
โข Provides clean, easy Automix alternative to alginates
โข Remains dimensionally stable, allowing delayed pouring,
re-pouring and cold disinfection
โข Available in Automix dispensing gun and
MixStar cartridges
StatusBlue is an innovative A-Silicone
impression material thatโs specifically
designed as a high efficiency alternative to
traditional alginates. Use it for temporaries,
model cast dentures, orthodontic models and
opposing jaw models. StatusBlue can be cold
disinfected and re-poured as needed for up to 2
weeks. Available in 380ml cartridges for the MixStar
eMotion machine (also fits the Pentamix machine) or 50ml Automix cartridges for use
with Type 50 10:1 dispensing guns. Our convenient Automix options give you easy
mixing and dispensing with no hand mixing, no mess, and no clean-up.
MixStar eMotion
The MixStar eMotion Machine
MixStar eMotion is an efficient, dynamic mixing
machine that provides clean, easy and hands-free
mixing and dispensing of pre-filled 380ml
cartridges. MixStar eMotion includes two
built-in times indicating working and setting
times for up to six impression materials.
ImpressionMaterials
Call 1-800-662-6383 or visit www.dmg-america.com
Ordering Information
See inside back cover
6. LuxaCore Z-Dual
The ultra-strong, ultra-reliable core build-up
material created with zirconia
โข Exceptionally high compressive strength for enhanced stability
โข Patented nanotechnology prevents particle agglomeration
โข Cuts remarkably like natural dentin
โข Film thickness of precision cement
โข Perfect properties, even when used as a post cement
โข Smoother material with enhanced flow
โข More stable, firmer, easier to form
Its combination of zirconia filler with DMGโs patented nanotechnology means it significantly
improves strength, flowability and physical properties โ itโs the ultimate in resin technology!
LuxaCore Z-Dual also works for your post cementing needs. It is available in the Automix System
with 3 shades: A3, Light Opaque and Blue in a 48gm cartridge with 35 automix tips and intra-oral
tips and the Smartmix System with two 9gm syringes and 10 smartmix and intra-oral tips.
Ordering Information
See inside back cover
DMG America LLC, 242 South Dean Street, Englewood, NJ 07631
PostandCoreSystems
7. PostandCoreSystems
LuxaCore Dual
The core material that cuts, feels and
wears like dentin
โข Superior composite resin cures to a hardness and durability
comparable to healthy dentin
โข Choice of light cure or self cure enables flexible working time
โข Available in Natural (A3), Blue and White shades
LuxaCore Dual Core Material โ Superior strength, flexible
working time make it number one.
LuxaCore Dual has remained the number one selling dual-cure core
build-up material because no other product offers its combination of
high compressive strength, workability and convenience. LuxaCore
Dual dispenses at a workable viscosity that enables direct placement
without slumping. Then, it cures to a hardness and consistency
comparable to healthy dentin, for exceptionally easy and accurate
cutting. Luxacore Dual eliminates the need for layering
and permits bulk fill. Itโs also radiopaque and releases
fluoride to help prevent secondary caries. For
maximum speed, you can light cure in as little as 20
seconds. Or, you can allow the material to self-cure for
increased working time. LuxaCore Dual is available in three shades:
Natural (A3), Blue and White
LuxaPost
LuxaPost is designed to react like
natural tooth structure
โข Only one drill per size (no pre-shaping drill necessary)
โข User-friendly, color-coded system
โข Retention grooves improve
mechanical retention
โข Transparent for highly esthetic results
โข High flexural strength: Good stability
โข Post taper conforms easily to the
post preparation
Ordering Information
See inside back cover
Call 1-800-662-6383 or visit www.dmg-america.com
8. Luxatemp Ultra
The best just got better!
โข New standard for flexural strength
โข Unsurpassed break resistance
โข Fluorescence added to nano material
โข Faster curing, easier cutting and handling
Over 20 years ago, Luxatemp set the benchmark
as the ultimate provisional material.
Now, Luxatemp Ultra has set the standard once again! Incorporating proprietary nanotechnology,
Luxatemp Ultra contains industry-leading flexural strength โ the true measure of provisional stability
and long-term durability. It provides outstanding esthetics with the addition of Fluorescence to make
provisionals appear more like natural teeth in all lighting conditions. It is available in the Automix
system with 6 different lifelike shades (A1, A2, A3, A3.5, B1 and Bleach Light) in 76gm cartridges with 15
automix tips and the Smartmix system with 3 shades (A2, B1 and Bleach Light) in a 15gm syringe with
10 automix tips
Ordering Information
See inside back cover
DMG America LLC, 242 South Dean Street, Englewood, NJ 07631
#1 in flexural strength
University study shows Luxatemp Ultra
has greater flexural strength than
Integrityโข and Protempโข Plus!
(โFlexural Strength of Provisional Restoratives,โ
a comparative study; Perry R., et al)
ProvisionalMaterials
9. ProvisionalMaterials
Luxatemp Plus
The original 10:1 Automix bisacryl
temporary material
โข Low shrinkage results in highly accurate temporaries
with excellent marginal adaptation
โข Available in 5 lifelike shades (A1, A2, A3.5, B1, BL) for superior esthetic results
โข No-mess, no-mixing dispensing system
Luxatemp Solar
A high-quality light-cured bisacryl
provisional material
โข Offers extended working time when creating
temporary crowns and bridges
โข Light cures in seconds to form strong,
abrasion-resistant provisionals
โข Available in A2 shade
LuxaFlow / LuxaFlow Ultra
The add-on resin formulated to work with Luxatemp
and other bisacryl provisional materials
โข Ideal for class 1โs, blocking out undercuts and as a
solution for enamel defects; also effective in creating
a seal in gingival interfaces
โข Easy to apply formula provides controlled working
time and light-cures on demand
โข Highly polishable for optimal esthetic results
LuxaGlaze
One-bottle light-curing varnish for provisionals
โข Quick, easy, esthetically superior alternative to mechanical polishing
โข Light cures in as little as 10 seconds
โข Lifelike high-gloss finish that greatly enhances the look of
a temporary restoration
Ordering Information
See inside back cover
Call 1-800-662-6383 or visit www.dmg-america.com
10. TempoCem
The right adhesion for all types of provisionals
โข Three customized formulations provide optimal adhesion for all types
of temporary restorations: TempoCem (with Eugenol), TempoCemNE
(without Eugenol) and TempoCem Soft
โข Securely retains restorations while remaining flexible for easy removal
โข Non-Eugenol formula available for cases where the final restoration will
be cemented with a resin or resin-reinforced glass ionomer
Reliable, easy-to-use TempoCem temporary cements are available in three customized formulations for optimal
adhesion. Original TempoCem has a zinc oxide/eugenol formula designed for use with all types of provisionals.
TempoCem Soft has the same chemistry, but sets to a softer end hardness for easier removal of tight-fitting
temporaries. The added eugenol in both cements works as an analgesic for patients with sensitive teeth.
TempoCemNE is a non-eugenol formula used for cases where the final restoration will be cemented with a resin or
resin-reinforced glass ionomer, because eugenol may inhibit resin polymerization. All three are available in 25 ml
Automix cartridges for use with the Type-25 dispensing gun. TempoCem and TempoCemNE are also available in
convenient Smartmix hand-held syringes.
Ordering Information
See inside back cover
DMG America LLC, 242 South Dean Street, Englewood, NJ 07631
Cements,BondingAgentsandBaseLiners
11. Cements,BondingAgentsandBaseLiners
PermaCem Dual, PermaCem
Patented zero-expansion permanent cement is safe for all restorations, including ceramic crown
โข Light-cures in as little as 40 seconds for maximum speed
โข Self-cures in minutes
โข High strength, fluoride-releasing compomer-based composition
โข Low film thickness for easy and precise crown and bridge placement
โข Gentle phosphorous-free formula helps prevent post-operative sensitivity
โข Generates minimal heat during polymerization
โข Radiopaque for easy diagnosis
Vitique
The premier universal esthetic cementation system
โขUnparalleled Color Commandโข system for precise shade matching
โข Flexibility with 8 different base and try-in shades and 2 different catalyst viscosities
โขFast, precise placement with unique delivery systems for both light cure and dual cure
LuxaBond
A dual-curing adhesive system providing user with more reliable
total bond strength
โข Compatible with all composite resin materials-recommended for all applications with LuxaCore
โข Indicated for bonding of posts, cores, crowns, bridges, inlays and onlays
โข Cures without a light; can be used for all indirect procedures
โข Better Adhesion
โข Specifically shaped Endobrushes for an easier application in the root canal
โข Non-acetone, non-alcohol formulation
Teco
The one push-button bonding system for all light-cured materials
โข Spill-proof, disposable package โข Non-technique sensitive
โข Odor-free non-acetone formula โข No risk of cross-contamination
โข Predictable bond to enamel & dentin โข Excellent viscosity; does not pool
Contax
The ideal bonding agent for all dual-cure, light-cure and self-cure materials
โข Self-etching, self-conditioning adhesive system for dentin and enamel
โข Available in 5 (4 Vita) lifelike shades for superior esthetic results
โข Water-based primer allows for different techniques
Ionosit MicroSpandโข
A base material that can be used to block out undercuts in cavity
preparations for inlays and onlays, as well as a liner under amalgam
โข Bonds to dentin and composite โข Fluoride releasing
โข Bacteriostatic โข Light cured
โข Single component โ no mixing! โข Radiopaque
Ordering Information
See inside back cover
Call 1-800-662-6383 or visit www.dmg-america.com
12. LuxaBite
Innovative rigid bisacryl bite registration material
โข Combines superior handling properties and a firmer set to produce the most
accurate and stable bite registration available
โข Easy to use automix dispensing system
โข Withstands temperature variations and handling better than any other material
LuxaBite innovative rigid bisacryl bite registration material.
LuxaBiteโs rigid bisacryl chemistry withstands temperature variations and handling better than any other material, so
the bite registration you take is the same one the lab receives! Unlike traditional plaster and polyvinyl siloxane bite
registration materials, LuxaBite exhibits no compression or flexing when mounted, ensuring total predictability. In fact,
LuxaBite is a valuable tool for checking the accuracy of plaster models and you can even use it to mount several sets of
casts to the same bite.
Ordering Information
See inside back cover
DMG America LLC, 242 South Dean Street, Englewood, NJ 07631
BiteRegistrationMaterials
13. BiteRegistrationMaterials
O-Bite
Rigid-setting bite registration material with proprietary vinyl
polysiloxane formulation
โข Shore A Hardness of 94 provides unrivaled stability and resistance to breakage
โข Patient-friendly fresh orange color and scent
โข Dimensionally stable with the ability to withstand warm weather, storage, shipping,
cold disinfection and model mounting without flexing or distortion
O-Bite is a superior new bite registration material that provides exceptional accuracy, predictability and speed. Specifically
developed to yield more stable and precise bite registrations, O-Biteโs proprietary vinyl polysiloxane formulation offers a Shore
A Hardness of 94 providing unrivaled stability and resistance to breakage.
O-Bite makes bite registrations easier for you, your patients and your lab. O-Bite is a soft, non-gritty, thixotropic, patient-friendly
orange material with a neutral taste and pleasant orange scent. O-Biteโs Automix Type 50 dispenser system allows for easy
mixing and dispensing, precise placement and maximum efficiency, with Automix tips that creates 32% less material waste.
O-Bite requires no special technique and will not stick to undercuts or existing restorations. Once youโve removed the
registration from the mouth, simply trim it with a standard scalpel, disinfect it and send it off to the lab.
Ordering Information
See inside back cover
Call 1-800-662-6383 or visit www.dmg-america.com
15. ClearShield
Goes on clearโฆclearly tastes better!
โข Clump Free consistency that dries clear
โข Contains Xylitol
โข Gluten, Aspartame and Saccharin free
Kolorz ClearShield 5% Sodium Fluoride Varnish goes on clear, with no embarrassing yellow discoloration.
And kids love itโs great watermelon, bubblegum and mint flavors, developed by gourmet food-industry
professionals.
About Kolorz Productsโฆ
Kolorz Products offer the benefits of advanced GLUTEN-FREE formulas, convenient application options, non-
caloric natural sweeteners, and XYLITOL. Their proprietary flavorings were developed in consultation with
food industry professionals, to deliver great flavor and aroma not found in any competitive products.
Ordering Information
See inside back cover
Kolorz
16. Kolorz
Prophylaxis Paste
Premium splatter-free fluoride formulas
โข Choice of grits available
โข Disposable unit-dose cups
โข Contains Xylitol
โข Gluten, Aspartame and Saccharin free
Sixty Second Fluoride Foam
Acidulated Phosphate formula contains 1.23% Fluoride ion
โข Smooth foam consistency for better patient acceptance
โข Gluten, Aspartame and Saccharin free
โข Contains Xylitol
Sixty Second Fluoride Gel
Acidulated Phosphate formula contains 1.23% Fluoride ion
โข Thixotropic (will not run under bite pressure)
โข Economical 16 oz bottles
โข Contains Xylitol
โข Gluten, Aspartame and Saccharin free
Neutral Fluoride Foam
2% Sodium Fluoride (0.9% Fluoride ion) with neutral pH
โข Neutral pH
โข 4-minute formula
โข Contains Xylitol
โข Smooth foam consistency for better patient acceptance
โข Gluten, Aspartame and Saccharin free
Topical Anesthetic Gel
Maximum strength 20% Benzocaine formula provides
quick onset for fast pain relief
โข No bitter aftertaste
โข Quick onset for fast pain relief
โข Perfect choice for perio
Ordering Information
See inside back cover
17. ClearShield
799501 Kolorz ClearShield 5% Sodium Fluoride Varnish Watermelon 35 pack (35 single-unit dose pkgs (0.40 mL)
799502 Kolorz ClearShield 5% Sodium Fluoride Varnish Watermelon 200 pack (200 single-unit dose pkgs (0.40 mL)
799503 Kolorz ClearShield 5% Sodium Fluoride Varnish Bubblegum 35 pack (35 single-unit dose pkgs (0.40 mL)
799504 Kolorz ClearShield 5% Sodium Fluoride Varnish Bubblegum 200 pack (200 single-unit dose pkgs (0.40 mL)
799506 Kolorz ClearShield 5% Sodium Fluoride Varnish Mint 35 pack (35 single-unit dose pkgs (0.40 mL)
799507 Kolorz ClearShield 5% Sodium Fluoride Varnish Mint 200 pack (200 single-unit dose pkgs (0.40 mL)
Prophy Paste
788401 Kolorz Prophy Paste โ Triple Mint, Fine Grit (200 unit-dose cups)
788402 Kolorz Prophy Paste โ Triple Mint, Medium Grit (200 unit-dose cups)
788403 Kolorz Prophy Paste โ Triple Mint, Coarse Grit (200 unit-dose cups)
788404 Kolorz Prophy Paste โ Triple Mint, X-tra Coarse Grit (200 unit-dose cups)
788406 Kolorz Prophy Paste โ Cherry Burst, Medium Grit (200 unit-dose cups)
788407 Kolorz Prophy Paste โ Cherry Burst, Coarse Grit (200 unit-dose cups)
788417 Kolorz Prophy Paste โ Bubblegum, Fine Grit (200 unit-dose cups)
788408 Kolorz Prophy Paste โ Carnival Pak, Fine Grit (100 unit-dose cups Cotton Candy, 100 unit-dose cups Blue Raspberry)
788409 Kolorz Prophy Paste โ Carnival Pak, Medium Grit (100 unit-dose cups Cotton Candy, 100 unit-dose cups Blue Raspberry)
788415 Kolorz Prophy Paste โ Cinnamon & Mint Assorted, Medium Grit (100 unit-dose cups Cinnamon, 100 unit-dose cups Mint)
788416 Kolorz Prophy Paste โ Cinnamon & Mint Assorted, Coarse Grit (100 unit-dose cups Cinnamon, 100 unit-dose cups Mint)
Sixty Second Fluoride Foam
766201 Kolorz Sixty Second Fluoride Foam โ Triple Mint (4.4 oz can)
766202 Kolorz Sixty Second Fluoride Foam โ Cherry Cheesecake (4.4 oz can)
766203 Kolorz Sixty Second Fluoride Foam โ Cotton Candy (4.4 oz can)
766204 Kolorz Sixty Second Fluoride Foam โ Blue Raspberry (4.4 oz can)
Neutral Fluoride Foam
766205 Kolorz Neutral Fluoride Foam โ Triple Mint (4.4 oz can)
Sixty Second Fluoride Gel
777301 Kolorz Sixty Second Fluoride Gel โ Triple Mint (16 oz bottle)
777302 Kolorz Sixty Second Fluoride Gel โ Cherry Cheesecake (16 oz bottle)
777303 Kolorz Sixty Second Fluoride Gel โ Cotton Candy (16 oz bottle)
777304 Kolorz Sixty Second Fluoride Gel โ Blue Raspberry (16 oz bottle)
777305 Kolorz Sixty Second Fluoride Gel โ Piรฑa Colada (16 oz bottle)
Tropical Anesthetic Gel
755101 Kolorz Topical Anesthetic Gel โ Triple Mint (1 oz jar)
755102 Kolorz Topical Anesthetic Gel โ Cherry Burst (1 oz jar)
755103 Kolorz Topical Anesthetic Gel โ Cotton Candy (1 oz jar)
755104 Kolorz Topical Anesthetic Gel โ Blue Raspberry (1 oz jar)
755105 Kolorz Topical Anesthetic Gel โ Piรฑa Colada (1 oz jar)
Ordering Information: Kolorz
For more information, call us at 1-800-662-6383. To find out more about all of our
innovative dental products, visit our website at www.dmg-america.com
DMG AMERICA
242 South Dean Street โข Englewood, New Jersey 07631
P: 800-662-6383 โข 201-894-5505 โข F: 201-894-0213 โข www.dmg-america.com