This document contains a resume for VenkateswaraRaoGoli. It summarizes his work experience, education, skills, and objectives. He has over 10 years of experience in chemical process and equipment design. Currently he works as a Project Engineer at Nonferrous Materials Technology Development Centre, where he has led several projects involving material development, equipment design, and process simulation. His objective is to further develop his expertise in process and product development projects across various process industries.

1. Page 1 of 2
VenkateswaraRaoGoli
H#9-6-17/2,SGR Colony, Champapet,Hyderabad, Telangana – 79.
Mobile: +91 9290577643; E-mail:venky_goli@yahoo.com
A qualified chemical engineer experienced in chemical process and equipment design offering 10years’ experience in
projects, design, production, process simulation.
Currently working with Nonferrous Materials Technology Development Centre (NFTDC), Hyd, for 7 years as a Project
Engineer.
Previously worked with Sweetech Engineers as a Design Engineer & Vasant Chemicals Ltd as a Graduate Engg Trainee.
Objective: To make use of engineering skills in process and product development projects across process industries and
develop further expertise in the field in next few years.
EXPERTISE PROFILE
Projects side:
 Preparing WBS for given project
 Time scheduling for project activities.
 Preparing of bill of material (BOM) required for task.
 Finding material suppliers and proceeds for procurement activities
 Interaction with vendors forcompleting the job works.
 Follow up the vendors for completing the job works within given timeline.
Design side:
 Developing the isometric view (3D view) of sulfur based alloy roasting plant in Catia.
 Generating plant layout drawing for chemical plant in Catia.
 Getting process parameters and inputs from production dept. and end-users
 Design of process equipments
 Manufacturing drawings of parts with dimensions and tolerance in AutoCAD.
 Material estimation and cost estimation
 Sent to vendors of fabrications
 inspection
 Installation and commissioning
 Feedback from end-users and implements further modifications if required.
Process side:
 Handle the Oxidation and Reduction reactions for chemical products.
 Calculate the boiler and oil fired furnace efficiency.
 Sizing of venture scrubber for dust &fumes collection for boiler.
 Optimization of design for duct line leading to less pressure drop.
 Prepared PFD and P&ID drawings for chemical product development.
 Calculate the filtration rate and pressure drop in plate and frame filters.
 Deposition of Ni and Cr on plastic foam with electrolysis and electroplating.
 Process simulation of Absorption column of Water,N2 and Butane.
 Simulation of distillation column of Benzene and Toluene mixture with aspen plus.
 Heat Transfer calculation in various processes and operations.
 Shift maintenance and coordination
CORE COMPETENCIES AT A GLANCE
Product Development■EquipmentDesign ■ P&ID,PFD and Manufacturing Drawings ■Preparation of BOM ■ ProcessModeling
& Simulation ■ Material Characterization ■ Chemical & Material Deposition
ENGINEERING SKILLS
 CAD Domain – AutoCAD2007 (8+yrs), CATIAV5R17(6+yrs).
 Process Modeling and Simulation – Aspen Plus 8.4 (2+ yrs)
EDUCATION
 MBA in Finance from UCC & BM, Osmania University, Hyderabad, 2009-2012.
 B.Tech in Chemical Engineering from CBIT, Osmania University, Hyderabad, 2001-2005.

2. Page 2 of 2
EXPERIENCE SUMMARY
Nonferrous Materials Technology Development Centre (NFTDC), Hyd. Sep,2008 to Present
Project Engineer
Projects Involved
 June’13 to Present: Production of Moly based product in NFTDC.
 Scale-up of the molybdenum disilicideMoSi2 Pilot plantfrom lab scale to pilot plant.
 PFD and P&ID drawings for process plant.
 Design ofheat exchanger for hot exhaustgases AND Trouble shooting at batch process ofmoly based product.
 May’13 to Present: Development of IT-SOFC under DST -RCUK.
 Plasma spraypowder deposition ofelectrolyte layer on porous and non-porous metal substrates
 Liquid precursor deposition with plasma sprayfor electrolytes .
 Sintering of Anode/Cathode layer by plasma glazing and conventional sintering techniques.
 Material characterization of coated substrates
 Apr’12 to Nov’14: Development of Ni-Cr Metal foam for GTRE.
 Installation ofnew process setup.
 Facilitating the process equipment’s and chemicals from vendors
 Electro less Ni plating on polyurethane foam.
 Electroplating ofNi and Cr on electro less Ni foam
 Apr’12 to Oct’14: Reengineering for High Critical Temp Superconducting Leads for IPR.
 Design and generating manf.Dwgs for Jigs and Fixtures for vacuum brazing and soldering of parts.
 Vacuum brazing and soldering ofSS Pipes with OFE copper wires in High Vacuum Furnace.
 Jul’12 to Dec’13:Development of Hot Rolling Mill Isothermal Split Furnace for NFTDC.
 Designed splitfurnace with kinetic motion with rollers and gear box for handling substrates inside furnace.
 Bills of Material (BOM) and sentinquiry to vendors for manufacturing offurnace.
 Jul’12 to July’13: Development of Diverter Target for IPR.
 CAD Modeling of assembly for plasma diverter.
 Designedhigh pressure and high temperature bonding system.
 Aug’10 to March’14: Fuel Injection & Lubrication System for GTRE.
 Re-engineering and fabrication of the Fuel Injection System.
 Generation 3D Modeling and 2D drawings for manufacturing
 Material characterization by using Scanned Electron Microscope (SEM).
 Sep’08 to Feb’10: INS Tarasa Ship, INS.
 3D virtual model building ofall outer-shape for naval ship.
Sweetech Engineers, Hyd. Oct’2006 to Aug’2008
Design Engineer
 Designed and developed venture scrubber for dust and fumes collection in boilers.
 Designed and developed filters for process water recycling.
 Prepared fabrication drawings of the components. Prepared BOM and handled material procurement.
 Prepared foundation drawings, PFD and P&ID.Prepared operation manual for the fumes collection system.
 Commissioned and managed final trials of fumes collection system at client site.
Vasant Chemicals Ltd, Hyd. Jun’2005 to Sep’2006
Graduate Engineer Trainee
 Involved in production report preparation, improvement projects, quality control and batch scheduling activities.
Permanent Address: H.No.#1-95 ,Allipuram(v),Mattampalli(m),Nalgonda(Dist),Telangana – 508 224.