1. Pipe fitting tools

2. What for ?
• What do we use _________ for ?
• What do we use _________ for ?
• What do we use _________ for ?
• What do we use _________ for ?
• What do we use _________ for ?
• What do we use _________ for ?

3. Spirit Levels

4. Why do we use a spirit level ?
• We use a spirit level to check whether a
surface is horizontal or vertical.

5. Spanner
• spanner

6. Why do we use a spanner ?
• We use a spanner to turn nuts and bolts.

7. Combination spanner

8. Why do we use a combination
spanner ?
• We use a combination spanner to hold and
turn things of different sizes.

9. Adjustable spanner

10. Why do we use an adjustable spanner ?
• We use an adjustable spanner to loosen
and tighten things of different sizes.

11. Stillson wrench

12. Why do we use a stillson wrench?
• We use a stillson wrench to turn soft iron
pipes and fittings with a rounded surface.

13. Hacksaw

14. Why do we use a hacksaw?
• We use a hacksaw to cut metal or plastic.

15. Pliers

16. Why do we use pliers?
• We use pliers to pull nails and cut wire.

17. Hammer

18. Why do we use a hammer?
• we use a hammer to hit nails.

19. Scriber

20. Why do we use a scriber?
• we use a scriber to mark lines on metal or
wood before cutting or shaping.

21. Measuring tape

22. Why do we use a measuring tape?
• We use a measuring tape to measure the
length of things.

23. Engineers square

24. Why do we use an Engineers square ?
• we use an Engineers square to mark out right
angles.

25. COMBINATION SQUARE

26. Why do we use an combination square ?
• we use an combination square to mark out
right angle.

27. Glass paper

28. Why do we use glass paper ?
• we use glass paper to make things (metal
, wood , etc.)smooth.