Walsall E0302 Manual Call Point with Break Glass GRP - Hazardous Area Zone 1 & Zone 2
1. Cornwallis Road, West Bromwich,
West Midlands, B70 7DX, UK
Tel: +44 (0)121 500 6161 ~ Fax: +44 (0)121 500 6300
Web: www.walsall-ltd.com ~ Email: sales@walsall-ltd.com
Walsall Middle East
RAK Free Trade Zone, P. O. Box 10559
Ras Al Khaimah, United Arab Emirates
Tel: +971 (0) 7 2660039
Fax: +971 (0) 7 2660242
Email: walsall@eim.ae
Email: kenny@walsall.ae
Walsall North America
11490 Westheimer, Suite 850
Houston 77077
Texas, USA
Tel: +1 (713) 425 6361
Fax: +1 (713) 783 0067
Walsall Asia Pacific
10 Upper Aljunied Link,York International
Industrial Building #02-05
Singapore 367904
Tel: +65 (0) 6858-5259
Fax: +65 (0) 6858-6560
Email: sales@walsall-ap.com
Walsall South America
Av Nilo Pecanha, 50.Sala 1709. Centro,
Rio De Janeiro,
RJ, Brazil.CEP, 20020-906.
Tel: +55 (21) 2025 1059
Fax: +55 (21) 3084-1446
Emergency Shutdown and Signalling Equipment
78
A
B
C D
110
125
110
104
7
All Dimensions in mm.
E0302 - Ex ed IIC Manual Call point with Break Glass in GRP
Description Switch Position Resistor (s) Product Code
Fire Alarm without Resistors 1N/O and 1N/C - E030210
Fire Alarm with Series Resistors 1N/O and 1N/C To be specified E030211
Fire Alarm with end of the line Resistors 1N/O and 1N/C To be specified E030212
Fire Alarm with series & end of the line Resistors 1N/O and 1N/C To be specified E030213
ORDERING INFORMATION
For 25 mm entries add/25 to Product Code e.g. E030212/25
ELECTRICAL SPECIFICATION
When used with monitored fire alarm systems as defined in BS 5839 ‘series’ and /
or ‘end of line’ resistors can be incorporated. Maximum allowable resistor power
dissipation is 0.5 Watts at 24 Volts. To comply with certification requirements the
resistor(s) must be fitted at the time of manufacture
Operating Voltage Operating Current Conductor Size
Volts Max Amps mm² Max
24 with resistors 2 max 2.5
415 without resistors 2 max 2.5
HAZARDOUS AREA SPECIFICATION
Marking to 94/9/EC II 2 GD
Type of Protection Ex ed IIC T6 Gb
Ex tb IIIC T80°C Db
Ambient Temp.°C Gas Temperature Class
(T*C)
Dust Temperature Class
(T**)(°C)Min Max
-20* +55 T6 80
* -40°C when used with a plug and gland rated to -40°C
Ingress Protection IP66 to EN60529:1992
Area Classification Zones 1,2,21,22
Certification No. SIRA03ATEX3293
Material Glass reinforced polyester
Finish Moulded red (other colours available)
Weight 1.2Kg
Cover fixing M6 allen head stainless steel screws
Gasket 1.2mm one piece solid nitrile rubber
Other Plastic
Componants
Polycarbonate
Operator flamepath Brass shaft in a brass housing
Glass 2.5mm Standard
Earthing Internal Ex e brass clamps on base
Entries 1x20mm threaded hole in face A, fitted with a
nylon Ex e stopping plug. 1x20mm threaded hole
in face B, fitted with a nylon Ex e cable gland.
25mm entries are available as an option.
PRODUCT SPECIFICATION
CABLE JOINTS, CABLE TERMINATIONS, CABLE GLANDS, CABLE CLEATS
FEEDER PILLARS, FUSE LINKS, ARC FLASH, CABLE ROLLERS, CUT-OUTS
11KV 33KV CABLE JOINTS & CABLE TERMINATIONS
FURSE EARTHING
www.cablejoints.co.uk
Thorne and Derrick UK
Tel 0044 191 490 1547 Fax 0044 191 477 5371
Tel 0044 117 977 4647 Fax 0044 117 9775582
CABLE JOINTS, CABLE TERMINATIONS, CABLE GLANDS, CABLE CLEATS
FEEDER PILLARS, FUSE LINKS, ARC FLASH, CABLE ROLLERS, CUT-OUTS
11KV 33KV CABLE JOINTS & CABLE TERMINATIONS
FURSE EARTHING
www.cablejoints.co.uk
Thorne and Derrick UK
Tel 0044 191 490 1547 Fax 0044 191 477 5371
Tel 0044 117 977 4647 Fax 0044 117 9775582