Cembre HT45-E Cembre HT45-E Hydraulic Crimping Tools Cembre HT45-E hydraulic crimping tool is lightweight and compact for the crimping and compression of low and high voltage cable lugs, splices and connectors up to 150sqmm. Cembre HT45-E hydraulic crimping tool features spring loaded handles allowing the die sets to be advanced with one hand - the other hand free to position the connector prior to crimping. For ease of operation and comfort of the electrical engineer or cable jointer the Cembre HT45-E crimp tool head can be fully rotated through 180 degrees. Cembre HT45-E hydraulic crimping tools feature built-in safety valves which by-pass the oil supply when the maximum pressure is reached. Cembre HT45-E : Length 346mm, Width 130mm - 50kN Crimp Force.

1. HT 45-E
HYDRAULIC CRIMPING TOOL
general features
Dimensions
mm
Crimping
force
kN
length
width
50
346
130
Weigth kg
2,0
M A I N A P P L I C AT I O N S - m a x s e c t i o n m m 2
L.V. lugs
and splices
H.V. lugs
and splices
150
Lightweight
and compact,
this tool is ideal
for the compression of connectors
on over head lines
and other general applications.
“C” sleeve
connectors
35
70
STORAGE
Type
Dimensions mm
Weight
kg
Supplied
with the tool
Available
upon request
VAL P1*
445x290xh95
1,2
D
—
*Suitable for storage of the tool and 20 sets of dies.
Having the benefit of spring
loaded handles, the dies can be
advanced using only one hand;
therefore leaving the other hand
free to position the connector.
For ease of operation and comfort
of the operator, the tool head can be
fully rotated through 180 degrees.
The built-in safety valve will by-pass
the oil supply when the maximum
pressure is reached, and a pressure
releasing system can easily be operated at any stage of the compression.
Openable head, ideal
for derivations from
running conductors
180° rotatable head,
to work in the most
comfortable position
Safety valve
bypassing the oil
supply when the
maximum pressure
is reached
The operator can advance the dies using only one hand,
leaving the other hand free to position the connector.
98
Pressure releasing
system, that can be
operated at any stage.
These tools are supplied without dies. For die selection, please refer to chart on pages 144 to 150