Slope and deflection in beams

1. STRENGTH OF MATERIAL (SOM)
Instructor: Suryakant Kumar
Copyright © Gaya College of Engineering, Gaya
GAYA COLLEGE OF ENGINEERING
MECHANICAL ENGINEERING – SEM IVTH
Assignment – 3
Due Date: 14.04.2020
Max. Marks: 50
Instructions:
1. Attempt all the questions using Maculey Bracket Function.
2. Marks to each Question is shown on the right hand side of each question.
3. Draw diagrams with pencils and use only A4 Plain paper.
4. Question are based on Course Outcome 3 (CO-3)
5. EI δ = EI y (y= δ=deflection in the beam)
Q.1. Find the Value of EIδ at the free end of the overhanging beam. Also check and report whether
the deflection is up or down.
10-Marks
Q.2 For the overhanging beam, determine (a). the Value of EIδ under 24kN load, and (b). the
maximum Value of EIδ between supports.
20-Marks
Q.3 For the simply supported beam compute the value of EIδ at the mid span. 5-Marks

2. STRENGTH OF MATERIAL (SOM)
Instructor: Suryakant Kumar
Copyright © Gaya College of Engineering, Gaya
Q.4 Determine the maximum deflection of the cantilever beam. 5-Marks
Q.5 Derive the equation for the elastic curve for the simply supported beam that carries the distributed load
shown below. 10-Marks
200 N/m
600 N/m
1 m 3 m