Process Heat Equipment

Stelter & Brinck

Industrial Process Heat
Equipment &
Combustion Field
Services

Our Motto: Our Contact Info:
Treat The Customer PH: 513-367-9300
As You Would Be FAX: 513-367-1524
Treated www.stelterbrinck.com

TABLE OF CONTENTS

Air Heaters
w Packaged
w Duct
w Indirect Fired
w Gun Style

Environmental Systems
w Thermal Oxidizers
w Catalytic Oxidizers

Aluminum and Steel Mill Equipment
w Ladle Dryers, Dryer-Preheaters, Preheaters
w Tundish Dryers, Dryer-Preheaters, Preheaters
w Scrap Preheaters, Dryers
w Aluminum Sow Dryers

Specialty Ovens and Furnaces

Integrated Packaged Systems
w Skidded
w Modular

Test Firing

Service Department
w Combustion Equipment Parts
w Preventative Maintenance
w Field Rebuilds
w Field Service

STELTER AND BRINCK, INC.
201 Sales Ave. w Harrison, OH 45030 w Phone: 513.367.9300 w Fax: 513.367.1524 w www.stelterbrinck.com

AIR HEATERS
Product Group Overview
Stelter and Brinck, Inc. designs and manufactures industrial, packaged process air heaters.
We have an air heater suitable for almost any process.

PBB PSB PWB PSWB

Natural Gas Steam Heat Cool or Heat Dehumidify
Propane, Butane with Liquid and Reheat
Our PBB air heaters Our PSB systems pro- Our PWB systems are Our PSWB systems
are complete packages vide an alternative to an inexpensive way to will dehumidify as
and include a burner as gas fired heat. The PSB provide conditioned well as reheat process
well as a process supply packaged unit is com- process air. The PWB air. The PSWB pack-
blower. Each air heater plete with process sup- packaged unit is aged unit is complete
is completely prepiped ply fan, industrial complete with process with process supply
and prewired and com- steam coil, and process supply fan, motor fan with motor starter,
plete with flame safety temperature controls. starter, industrial industrial cooling coil,
controls, process tem- water/liquid coil, and drain, steam reheat coil,
perature controls, and process temperature and process tempera-
motor starters. controls. ture controls.
Our PBB units burn
natural gas, propane,
or butane.
Each air heater is test
fired before shipment
in our production
facility.


AIR HEATERS
Stelter and Brinck, Inc. designs and manufactures industrial, packaged process air heaters.
We have an air heater suitable for almost any process.

AHD/AHDR IAH IAHR AHG

Duct Air Heater/ Indirect Gas Fired Indirect Gas Fired Gun Style
Fresh Air and Air Heaters Air Heaters Air Heaters
Recirculating Models
Our IAH units are IAHR heaters feature AHG units are ideal
AHD/AHDR air designed to heat your hot side recirculation for those processes
heaters are designed to process stream without to provide clean, uncon- that require larger
be inserted right into contamination by pro- taminated process air in mass flows, higher
your process ductwork. ducts of combustion. thermal efficiencies to temperatures, fuel oil
The burner in our AHD The IAH unit offers 90%. operation or any com-
units uses the oxygen thermal efficiency to bination thereof. The
Utilizing the same
present in the process 72%. arrangement of the
shell and tube heat
stream for combustion AHG makes it ideal
IAH heaters are exchanger as the IAH
eliminating the need for low oxygen or
complete with process heater, the IAHR
for an additional dirty air streams. The
controls, and rugged takes advantage of
combustion air source. AHG unit is available
shell and tube heat recirculated hot side
with a gas only, oil
AHDR units are exchanger. air to provide very
only, or combination
designed for process high thermal efficiency
gas/oil burner.
streams with low in a very compact size.
oxygen content and
feature a combustion
blower.


PACKAGED AIR HEATERS
PBB Series Overview
Natural Gas, Propane or Butane Direct Fired

Customer Convenience Superior Performance
PBB heaters are completely packaged with process Stelter and Brinck, Inc. PBB heaters are designed to
blowers, air heat burners, and controls. These heaters provide unmatched performance in direct fired air
offer the utmost in customer convenience with total heating. PBB heaters are designed to be flexible, with
prewired and prepiped assembly including an insulat- high energy turndown standard, and optional features
ed outlet transition with protective metallic skin. that provide wide airflow turndown. PBB heaters are a
product of more than 40 years of industrial combustion
PBB heaters are designed to be easy to use and
experience and feature:
install, among the features offered are:
w Standard energy turndown of 30:1.
w Structural steel skid mounted assembly.
w Models available with higher turndown.
w Integral control panel with 8 point first out fault
annunciator, PID digital temperature control (single w Optional inlet air filter assemblies.
or multi-loop), FM approved high temperature
w Optional inlet silencers.
limit, flame safety relay, main power disconnect,
control transformer, process blower motor starter, w Process static pressures to 60" w.c.
and operator indicator lights and pushbuttons.
w Process air temperatures to 1200ºF.
w Optional remote control interface capability for use
w PID digital temperature control.
with PLC or DCS systems is available.
w Fires on natural or propane gasses, other fuel
w NFPA/FM or IRI construction standards.
options available on request.
w Insulated and skinned 10 ga. combustion chamber
w Designed for ease of maintenance.
and outlet transition.
w Low Nox emissions are standard with optional
w Test fired and tuned prior to shipment.
equipment available as low as 30 ppm @ 3% O2.

PBB-LI PBB-MI PBB-SI
Packaged Air Heater with Medium Intensity Standard Intensity
Burner and Blower-Low Intensity


PBB Series
Packaged Air Heater with Burner and Blower

Stelter and Brinck, Inc. packaged heaters offer the customer the best option in easy to use
direct fired air heating. Our PBB heaters are self contained, fully test fired, and ready to install.

PBB-LI
Packaged Air Heater with Burner and Blower w Low Intensity
Max Outlet Temperature 550˚F
Contact the factory for assistance in selecting your next system.

High turndown industrial gas burner Convenient flame peepsight
and pressure test taps with
stainless steel I.D.
Manual process Heavy steel construction
air damper

Process blower

Stainless steel large
diameter sensing
tubing

Single point
fuel connection

Integrated, three phase Structural steel skid mounted
control panel
Safety fuel valve train


PBB-LI
Packaged Air Heater with Burner and Blower w Low Intensity

Max Max Input Req. Input Fuel Blower Standard
Model Air Flow mm Btu/hr mm Btu/hr A w/o Filter w/ Filter Conn. Size Hp Outlet
SCFM B C B C N.P.T Pressure
" w.c.
(see*)
2000-PBB-LI 2,000 1.5 1.3 66" 64" 135" 64" 135" 1" 7 1/2 8"
3500-PBB-LI 3,500 2.5 2.25 69" 71" 149" 71" 149" 1" 10 8"
5600-PBB-LI 5,600 4 3.6 72" 82" 165" 82" 165" 1 1/2" 20 8"
7400-PBB-LI 7,400 5.5 4.7 94" 93" 182" 93" 182" 2" 25 8"
9600-PBB-LI 9,600 7 6.1 94" 88" 170" 91" 170" 2" 30 8"
11800-PBB-LI 11,800 8 7.6 71" 76" 148" 78" 163" 2" 30 8"
15150-PBB-LI 15,150 11 9.75 81" 80" 163" 100" 173" 2 1/2" 40 8"
18500-PBB-LI 18,500 12 11.8 86" 84" 172" 108" 172" 2 1/2" 50 8"
23400-PBB-LI 23,400 16 15.1 94" 82" 178" 114" 180" 3" 60 8"
26700-PBB-LI 26,700 18 17.2 98" 82" 201" 120" 185" 3" 75 8"
30000-PBB-LI 30,000 20 19.25 103" 116" 178" 125" 211" 3" 100 8"
36000-PBB-LI 36,000 25 23.2 100" 105 194" 132" 194" 4" 100 8"
42000-PBB-LI 42,000 29 27 105" 111" 194" 139" 200" 4" 100 8"

• PBB-LI heaters include a medium efficiency filter.
• The filter is sized for a 0.3" w.c clean and a 1.0" w.c. dirty pressure drop.
• Outlet pressures listed include this max 1.0" w.c. drop.
• Parameters and dimensions are approximate and subject to change without notice.
*Higher delivery pressures available upon request, consult the factory.
Required burner input rated from 0º to 550ºF.


PBB Series
Packaged Air Heater with Burner and Blower


PBB-MI
Packaged Air Heater with Burner and Blower w Medium Intensity
Max Outlet Temperature 750˚F

Heavy steel construction

Manual process air damper
Industrial duty
supply blower

Integral
control panel

Single point
fuel connection Skidded
construction


PBB-MI
Packaged Air Heater with Burner and Blower w Medium Intensity

Max Input Req. Input Blower Outlet
Model SCFM mm Btu/hr mm Btu/hr A w/o Filter w/ Filter D Gas Train Hp Pressure
B C B C " w.c.
(see*)
2000-PBB-MI 2,000 2 1.9 66 68 142 68 142 33 1 1/2" 10 10"
3500-PBB-MI 3,500 3.5 3.34 77 72 163 72 163 45 2" 15 10"
5600-PBB-MI 5,600 6 5.95 80 79 169 79 169 52 2" 20 10"
7400-PBB-MI 7,400 7.5 7.08 88 82 170 82 170 57 2" 25 10"
9600-PBB-MI 9,600 9.5 9.18 103 91 184 91 184 67 2 1/2" 40 10"
11800-PBB-MI 11,800 12 11.29 81 97 167 97 181 44 3" 40 10"
15150-PBB-MI 15,150 15 14.49 90 86 179 100 191 47 3" 60 10"
18500-PBB-MI 18,500 18 17.7 97 95 187 108 197 51 3" 60 10"
23400-PBB-MI 23,400 23 22.39 100 105 180 114 187 56 4" 75 10"
26700-PBB-MI 26,700 26 25.55 103 92 187 120 194 56 4" 100 10"
30000-PBB-MI 30,000 29 28.71 118 126 213 126 223 65 4" 100 10"
36000-PBB-MI 36,000 35 34.4 138 116 230 132 247 70 4" 125 10"
42000-PBB-MI 42,000 41 40.19 138 141 244 141 250 70 4" 125 10"

• PBB-MI heaters include a medium efficiency filter.


PBB Series
Packaged air Heater with Burner and Blower


PBB-SI
Packaged Air Heater with Burner and Blower w Standard Intensity
Recommended for Outlet Temperatures to 900˚F
Higher temperature systems are available.

Heavy steel construction Integral control panel

10 gauge insulation cover

Industrial duty
blower with
inlet ﬁlter

Flame
peep sight

Single point fuel connection on Structural skid
FM/NFPA or IRI valve train construction


PBB-SI
Packaged Air Heater with Burner and Blower w Standard Intensity

Max Input Req. Input Blower Outlet
Model SCFM mm Btu/hr mm Btu/hr A w/o Filter w/ Filter D Gas Train Hp Pressure
B C B C " w.c.
(see*)
2000-PBB-SI 2,000 2.5 2.34 66 68 142 68 142 33 1 1/2" 10 10"
3500-PBB-SI 3,500 4.5 4.09 77 72 163 72 163 47 2" 15 10"
5600-PBB-SI 5,600 7 6.55 80 79 169 79 169 52 2" 20 10"
7400-PBB-SI 7,400 9 8.65 88 82 170 82 170 57 2" 25 10"
9600-PBB-SI 9,600 12 11.23 103 91 184 91 184 67 2 1/2" 40 10"
11800-PBB-SI 11,800 14 13.8 81 97 167 97 181 44 3' 40 10"
15150-PBB-SI 15,150 18 17.7 90 86 179 100 191 47 3" 60 10"
18500-PBB-SI 18,500 22 21.6 97 95 187 108 197 51 3" 60 10"
23400-PBB-SI 23,400 28 27.4 100 105 180 114 187 56 4" 75 10"
26700-PBB-SI 26,700 32 31.2 103 92 187 120 194 56 4" 100 10"
30000-PBB-SI 30,000 36 35.1 118 126 213 126 223 65 4" 100 10"
36000-PBB-SI 36,000 43 42.1 138 116 230 132 247 70 4" 125 10"
42000-PBB-SI 42,000 50 49.1 138 141 244 141 250 70 4" 125 10"

• PBB-SI heaters include a medium efficiency filter.


PSB Overview
Heat Air with Process Steam

PSB heaters are completely packaged with process Stelter and Brinck, Inc. PSB heaters are designed to
blowers, steam coils, and controls. Standard steam provide unmatched performance and to be flexible,
coils feature copper tubes with aluminum fins press fit with multiple layouts and options available. PSB
into expanded fin collars for maximum heat transfer. heaters are a product of 40 years of industrial process
These heaters offer the utmost in customer convenience experience and feature:
with total prewired assembly including an insulated
w High efficiency steam coils.
outlet transition with a protective metallic skin.
w Optional inlet air filter assemblies.
PSB heaters are designed to be easy to use and install,
among the features offered are: w Optional inlet silencers.
w Structural steel skid mounted assembly. w Process static pressures to 60" w.c.
w Integral control panel with PID digital w PID digital temperature control.
temperature control.
w Remote control interface capability for use with
w Materials chosen to fit your application.
PLC or DCS systems available
w Insulated and skinned 10 ga. outlet transition.
w Complete with steam control valve.

Custom units available
for other applications.

PSB
Packaged Steam
Coil with Blower


PSB
Packaged Steam Coil with Blower

Max Max Input Req. Input Blower Standard
Model Air Flow mm Btu/hr mm Btu/hr A w/o Filter w/ Filter Hp Outlet
SCFM B C B C Pressure
" w.c.
(see*)
2000-PSB 2,000 0.662 0.657 50" 65" 78" 65" 81" 7 1/2 8"
3500-PSB 3,500 1.16 1.16 64" 70" 78" 70" 78" 10 8"
5600-PSB 5,600 1.83 1.85 72" 81" 116" 81" 116" 20 7"
7400-PSB 7,400 2.45 2.45 77" 93" 134" 93" 134" 25 7"
9600-PSB 9,600 3.18 3.13 87" 127" 162" 127" 162" 30 8"
11800-PSB 11,800 3.91 3.86 65" 112" 142" 112" 156" 30 7"
15150-PSB 15,150 5.02 4.94 85" 97" 132" 100" 144" 40 7"
18500-PSB 18,500 6.13 6.05 89" 117" 158" 117" 168" 50 7"
23400-PSB 23,400 7.64 7.55 100" 99" 159" 114" 166" 60 7"
26700-PSB 26,700 8.86 8.86 110" 108" 179" 124" 189" 75 8"
30000-PSB 30,000 9.77 9.94 119" 119" 185" 125" 204" 100 7"

• PSB heaters include a medium efficiency filter.
• Sizes available based on 75 PSIG saturated steam.
* Higher delivery pressures available upon request, consult the factory.


PWB Overview
Heat or Cool with Liquids

The PWB unit can heat or cool your airstream and is Stelter and Brinck, Inc. PWB heaters/coolers are
designed for use with heat transfer fluids. Standard designed to provide unmatched performance and to
PWB units are complete with water/brine/glycol coil, be flexible, with multiple layouts and options available.
control panel, fluid flow control valve, and blower in PWB heaters/coolers are a product of 40 years of
one complete package. These heaters/coolers offer the industrial process experience and feature:
utmost in customer convenience with total prewired
w Water/brine/glycol coil, or heat transfer oil coils.
assembly including an insulated outlet transition with
a protective metallic skin. w Optional inlet air filter assemblies.
PWB heaters/coolers are designed to be easy to use w Optional inlet silencers.
and install, among the features offered are:
w Process static pressures to 60" w.c.
w PID digital temperature control.
w Integral control panel with PID digital
w Remote control interface capability for use
with PLC or DCS systems available.
w Insulated and skinned
10 ga. outlet transition.

Custom units available,
contact the factory.

PWB
Packaged Water
Coil with Blower


PSWB Overview
Dehumidify and Reheat Air in One Package

The PSWB is complete with water/brine/glycol cool- Stelter and Brinck, Inc. PSWB units are designed to
ing coil with condensate drain, steam coil, control provide unmatched performance and to be flexible,
panel,valve and blower in one complete package. with multiple layouts and options available. PSWB
Incoming air is cooled below its dew point across the units are a product of 40 years of industrial process
liquid cooling coil to reduce moisture content, then experience and feature:
reheated across the steam coil. Standard steam coils
w High efficiency cooling and steam coils.
feature copper tubes with aluminum fins press fit
into expanded fin collars for maximum heat transfer. w Optional inlet air filter assemblies.
Custom units available for other applications. These
w Optional inlet silencers.
units offer the utmost in customer convenience with
total prewired assembly including an insulated outlet w Process static pressures to 60" w.c.
transition with a protective metallic skin. w Fully proportional reheat temperature control.
PSWB units are designed to be easy to use and w Designed for ease of maintenance.
install, among the features offered are:
w Built in condensate single point drain connection.
w Integral control panel with PID digital
w Remote control interface
capability for use with
PLC or DCS systems available.
w Insulated and skinned
10 ga. outlet transition.
w Control valves.

PSWB
Packaged Steam Coil and
Water Coil with Blower


DUCT AIR HEATERS
Overview
Direct Fired Air Heaters

Stelter and Brinck, Inc. AHD and AHDR duct heaters Stelter and Brinck duct heaters are designed to provide
are completely packaged with air heat burners and unmatched performance in direct fired air heating.
controls. These heaters offer the utmost in customer Our duct heaters are a product of more than 40 years
convenience with prewired and prepiped assembly. of industrial combustion experience and feature:
Stelter and Brinck AHD and AHDR duct heaters are w Standard energy turndown of 30:1.
designed to be easy to use and install, among the
w Fully proportional temperature control
features offered are:
valve for 4-20 ma input.
w Remote control panel with flame safety relay,
w Fires on natural, propane, or butane gasses.
8 point first out annunciator, relays and breakers,
Other fuel options available on request.
alarm horn, local start/stop push buttons,
illuminated “E” stop button, indicator lights, FM w Easy maintenance, easy access to all parts.
approved high temperature limit, and PID digital
temperature controller (single or multi-loop).
w Remote control interface capability for use with
PLC or DCS systems available.
w FM/NFPA or IRI construction standard.

AHDR
AHD Recirculating Duct
Duct Section Air Heater Section Air Heater
(Fresh Air) (Recirculated Air)


DUCT AIR HEATERS
AHD
Fresh Air Duct Section Air Heater

AHD heaters are suitable for use on clean air streams with greater than 18% oxygen content.
Standard units are limited to 800˚F outlet temperature.
Custom units are available for higher outlet temperatures.

1200ºF insulation with 10 ga. steel cover

Heavy steel construction Flame peep sight

Prewired to numbered
terminal strip
Stainless steel
sensing tubing

Single point
fuel connection

Packaged fuel control
and safety valve train


DUCT AIR HEATERS
AHD
Fresh Air Duct Section Air Heater

Model Burner Natural Gas Fuel A B C
Number Rating SCFH Pressure Flange
mmbtu/hr Max. Required inches inches
"w.c.
AHD005 0.5 500 20 24 20 2 x 2 x 1/4
AHD010 1 1000 24 28 24 2 x 2 x 1/4
AHD015 1.5 1500 22 36 24 2 x 2 x 1/4
AHD020 2 2000 24 36 28 2 x 2 x 1/4
AHD030 3 3000 21 46 30 2 x 2 x 1/4
AHD040 4 4000 24 54 32 2 x 2 x 1/4
AHD050 5 5000 26 64 32 2.5 x 2.5 x 1/4
AHD060 6 6000 30 66 34 2.5 x 2.5 x 1/4
AHD070 7 7000 33 64 44 2.5 x 2.5 x 1/4
AHD080 8 8000 38 54 54 2.5 x 2.5 x 1/4
AHD090 9 9000 43 58 54 2.5 x 2.5 x 1/4
AHD100 10 10000 48 64 54 2.5 x 2.5 x 1/4
AHD110 11 11000 38 70 56 2.5 x 2.5 x 1/4
AHD120 12 12000 43 70 60 3 x 3 x 3/8
AHD140 14 14000 51 72 64 3 x 3 x 3/8
AHD160 16 16000 40 84 64 3 x 3 x 3/8
AHD170 17 17000 43 84 64 3 x 3 x 3/8
AHD190 19 19000 49 92 66 3 x 3 x 3/8
AHD210 21 21000 59 96 68 3 x 3 x 3/8
AHD230 23 23000 63 96 74 3 x 3 x 3/8
AHD250 25 25000 72 96 80 3 x 3 x 3/8
AHD270 27 27000 79 96 86 3 x 3 x 3/8
AHD300 30 30000 80 110 84 3 x 3 x 3/8

• Fuel pressure required is above the duct pressure and downstream
of the main fuel pressure regulator.


DUCT AIR HEATERS
AHDR
Recirculating Duct Section Air Heater

Recirculating air heaters are for use on air streams that are dirty, hot, recirculated, or with oxygen
content less than 18%. Max inlet air temperature is 750ºF. For higher inlet temperatures, contact the factory.
Standard units are limited to 900ºF outlet temperature.
Custom units are available for higher outlet temperatures.
Contact the factory for assistance in selecting your next system

Combustion air inlet Fully insulated,
heavy steel construction

High turndown
burner (40:1)

Prepiped and prewired
fuel valve train


DUCT AIR HEATERS
AHDR
Recirculating Duct Section Air Heater

Model Burner Natural Gas Fuel A B C
Number Rating SCFH Pressure Flange
mmbtu/hr Max. Required inches inches
"w.c.
AHDR005 0.5 500 20 24 20 2 x 2 x 1/4
AHDR010 1 1000 24 28 24 2 x 2 x 1/4
AHDR015 1.5 1500 22 36 24 2 x 2 x 1/4
AHDR020 2 2000 24 36 28 2 x 2 x 1/4
AHDR030 3 3000 21 46 30 2 x 2 x 1/4
AHDR040 4 4000 24 54 32 2 x 2 x 1/4
AHDR050 5 5000 26 64 32 2.5 x 2.5 x 1/4
AHDR060 6 6000 30 66 34 2.5 x 2.5 x 1/4
AHDR070 7 7000 33 64 44 2.5 x 2.5 x 1/4
AHDR080 8 8000 38 54 54 2.5 x 2.5 x 1/4
AHDR090 9 9000 43 58 54 2.5 x 2.5 x 1/4
AHDR100 10 10000 48 64 54 2.5 x 2.5 x 1/4
AHDR110 11 11000 38 70 56 2.5 x 2.5 x 1/4
AHDR120 12 12000 43 70 60 3 x 3 x 3/8
AHDR140 14 14000 51 72 64 3 x 3 x 3/8
AHDR160 16 16000 40 84 64 3 x 3 x 3/8
AHDR170 17 17000 43 84 64 3 x 3 x 3/8
AHDR190 19 19000 49 92 66 3 x 3 x 3/8
AHDR210 21 21000 59 96 68 3 x 3 x 3/8
AHDR230 23 23000 63 96 74 3 x 3 x 3/8
AHDR250 25 25000 72 96 80 3 x 3 x 3/8
AHDR270 27 27000 79 96 86 3 x 3 x 3/8
AHDR300 30 30000 80 110 84 3 x 3 x 3/8

• Fuel pressure required is above the duct pressure and downstream
of the main fuel pressure regulator.


INDIRECT FIRED AIR HEATERS
Overview
Indirect heaters are packaged with hot side blowers, Stelter and Brinck, Inc. indirect heaters are designed
air heat burners, heat exchanger and controls. These to provide unmatched performance in indirect fired
heaters offer the utmost in customer convenience with air heating. Heaters are available in medium efficiency
total prewired and prepiped assembly. models for low capital cost, and high efficiency units
for lower operating costs.
Our indirect fired heaters are designed to be easy to
use and install, among the features offered are: w Single point fuel and power connection.
w Structural steel skid mounted assembly. w Thermal efficiencies to 90%.

w Integral control panel with annunciator, PID digital w Standard energy turndown of 30:1.
temperature control(single and multi-loop), (2) FM Models available with up to 60:1 turndown.
approved high temperature limits, flame safety
w Rated for process air static pressures to 14.9 PSIG.
relay, main power disconnect, control transformer,
and hot side blower motor starter. w Process air temperatures to 1000ºF.
w FM/NFPA or IRI construction standard. w Fully proportional process temperature control.
w Insulated and skinned 10 ga. combustion w Indirect heaters can be provided to fire on natural
chamber. gas, propane gas, mixed fuel gasses, and light,
medium, and heavy fuel oils.
w Designed for easy maintenance.
Options available:
w Shell and tube seal welded heat exchanger, with
w Control interface for PLC or DCS operation.
heat exchanger materials chosen specifically
w Process supply blowers and duct. for your application. Provides heat without
contamination from
w Secondary Heat recovery for producing
combustion by-products.
hot air or water.

IAHR
Hot Side Recirculating
Indirect Fired Air Heater
up to 90% Thermal Efficiency

IAHNR
Non-Recirculating
Indirect Fired Air Heater
up to 70% Thermal Efficiency


IAH-NR Series
Non-Recirculating Indirect Fired Air Heater

Stelter and Brinck, Inc. non-recirculating indirect fired air heaters offer a
low capital cost, medium efficiency solution to indirect air heating applications.
Heaters are furnished complete with integral, seal welded, tubular heat exchanger, burner and combustion
system, and controls. IAH-NR heaters can be configured for local or remote control and can be provided
in horizontal or vertical orientation, and indoor or outdoor trim to fit your plant layout requirements.

Vertical Unit

Horizontal Unit

Shell and tube heat exchanger
Heavy, fully insulated
double wall construction

Integral or remote control panel Hot side blower


IAH-50NR
Non-Recirculating Indirect Fired Air Heater with 50% Effective Heat Exchanger

300ºF PROCESS OUTLET TEMP .
SCFM Heat transfer Burner Dim A DimB Dim C Hx Hx Exhaust
Model net rating inlet Ø outlet Ø Ø
mmbtu/hr mmbtu/hr Ft. Ft. Ft. in. in. in.
IAH-50NR-00503 500 0.165 0.5 18 1.5 8 6 8 8
IAH-50NR-01003 1000 0.33 1 18.5 2 8 10 10 10
IAH-50NR-01503 1500 0.5 1.5 18.5 2.5 8 12 14 12
IAH-50NR-02503 3000 0.99 2.5 19.5 3.5 8.5 16 18 18
IAH-50NR-04003 5000 1.65 4 20 5.5 9 22 24 22
IAH-50NR-06003 7500 2.5 6 21 8 9.5 26 28 28
IAH-50NR-08003 10000 3.3 8 22 10 10 30 32 32

IAH-50NR-01005 500 0.275 1 18.5 1.5 8 6 8 8
IAH-50NR-01505 1000 0.55 1.5 18.5 2 8 10 10 10
IAH-50NR-02005 1500 0.825 2 19 2.5 8 12 14 14
IAH-50NR-04005 3000 1.65 4 19.5 4 8.5 16 18 18
IAH-50NR-07005 5000 2.75 7 20.5 6 9 22 24 24
IAH-50NR-10005 7500 4.125 10 21.5 8 9.5 26 30 30
IAH-50NR-13505 10000 5.5 13.5 22.5 10.5 10 30 34 34

IAH-50NR-01007 500 0.385 1 19 2.5 8 6 8 8
IAH-50NR-02007 1000 0.77 2 19 3 8 10 12 12
IAH-50NR-03007 1500 1.155 3 19.5 3.5 8.5 12 14 14
IAH-50NR-06007 3000 2.31 6 20 4.5 9 16 20 20
IAH-50NR-10007 5000 3.85 10 21 6.5 9 22 24 24
IAH-50NR-14507 7500 5.775 14.5 22 9 9.5 26 30 30
IAH-50NR-19507 10000 7.7 19.5 23 11 10 30 36 36

• All data based @ 0ºF ambient and process air inlet temperature.
• Process air drop 3.0" w.c. all sizes.
• Contact factory for operating characteristics under different conditions.
• Fuels: natural gas, propane, butane. Other fuels available, contact the factory.
• Parameters and dimensions are approximate and subject to change without
notice, contact the factory for application advice.


IAH-72NR
Non-Recirculating Indirect Fired Air Heater with 72% Effective Heat Exchanger

IAH-72NR-00503 500 0.165 0.5 21 1.5 8 6 8 8
IAH-72NR-01003 1000 0.33 1 21.5 2 8 10 10 10
IAH-72NR-01003 1500 0.5 1 21.5 2.5 8 12 14 12
IAH-72NR-02003 3000 0.99 2 22.5 3.5 8.5 16 18 16
IAH-72NR-03003 5000 1.65 3 23 5.5 9 22 24 22
IAH-72NR-04003 7500 2.5 4 24 8 9.5 26 28 26
IAH-72NR-05503 10000 3.3 5.5 25 10 9.5 30 32 30

IAH-72NR-00505 500 0.275 0.5 21 1.5 8 6 8 8
IAH-72NR-01005 1000 0.55 1 21.5 2 8 10 10 10
IAH-72NR-01505 1500 0.825 1.5 21.5 2.5 8 12 14 12
IAH-72NR-03005 3000 1.65 3 22.5 4 8.5 16 18 18
IAH-72NR-04505 5000 2.75 4.5 23 5.5 9 22 24 22
IAH-72NR-07005 7500 4.125 7 24 8 9.5 26 30 26
IAH-72NR-09005 10000 5.5 9 25 10 9.5 30 34 30

IAH-72NR-01007 500 0.385 1 21.5 1.5 8 6 8 8
IAH-72NR-01507 1000 0.77 1.5 21.5 2 8 10 12 10
IAH-72NR-02007 1500 1.155 2 22 2.5 8.5 12 14 12
IAH-72NR-04007 3000 2.31 4 22.5 4 9 16 20 18
IAH-72NR-06507 5000 3.85 6.5 23.5 6 9 22 24 24
IAH-72NR-10007 7500 5.775 10 24.5 8 9.5 26 30 28
IAH-72NR-13007 10000 7.7 13 25.5 10.5 10 30 36 32

• All data based @ 0ºF ambient and process air inlet temperature.
• Fuels: natural gas, propane, butane. Other fuels available, contact the factory.


IAH-50NRV
Non-Recirculating Vertical Indirect Fired Air Heater with 50% Effective Heat Exchanger

300 F PROCESS OUTLET TEMP
SCFM Heat transfer Burner Dim A Dim B Dim C Hx Hx Exhaust
Model net rating inlet dia. outlet dia. dia.
mm Btu/hr mm Btu/hr Ft. Ft. Ft. in. in. in.
IAH-50NRV-00503 500 0.165 0.5 11 2 10 6 8 8
IAH-50NRV-00503 1000 0.33 1 11.5 2.5 10 10 10 10
IAH-50NRV-00503 1500 0.5 1.5 11.5 3 10 12 14 12
IAH-50NRV-00503 3000 0.99 2.5 12.5 4 10.5 16 18 18
IAH-50NRV-00503 5000 1.65 4 13 6 11 22 24 22
IAH-50NRV-00503 7500 2.5 6 14 8.5 11.5 26 28 28
IAH-50NRV-00503 10000 3.3 8 15 10.5 12 30 32 32

IAH-50NRV-01005 500 0.275 1 11.5 2 10 6 8 8
IAH-50NRV-01505 1000 0.55 1.5 11.5 2.5 10 10 10 10
IAH-50NRV-02005 1500 0.825 2 12 3 10 12 14 14
IAH-50NRV-04005 3000 1.65 4 12.5 4.5 10.5 16 18 18
IAH-50NRV-07005 5000 2.75 7 13.5 6.5 11 22 24 24
IAH-50NRV-10005 7500 4.125 10 14.5 8.5 11.5 26 30 30
IAH-50NRV-10505 10000 5.5 13.5 15.5 11 12 30 34 34

IAH-50NRV-01007 500 0.385 1 12 3 10 6 8 8
IAH-50NRV-02007 1000 0.77 2 12 3.5 10 10 12 12
IAH-50NRV-03007 1500 1.155 3 12.5 4 10.5 12 14 14
IAH-50NRV-06007 3000 2.31 6 13 5 11 16 20 20
IAH-50NRV-10007 5000 3.85 10 14 7 11 22 24 24
IAH-50NRV-14507 7500 5.775 14.5 15 9.5 11.5 26 30 30
IAH-50NRV-19507 10000 7.7 19.5 16 11.5 12 30 36 36

• All data based @ 0°F ambient and process air inlet temperature.
• Process air drop 3.0" w.c. all sizes
• Fuels: natural gas, propane, butane. Other fuels available, call the factory.


IAH-72NRV
Non-Recirculating Vertical Indirect Fired Air Heater with 72% Effective Heat Exchanger

IAH-72NRV-00503 500 0.165 0.5 14 2 10 6 8 8
IAH-72NRV-01003 1000 0.33 1 14.5 2.5 10 10 10 10
IAH-72NRV-01003 1500 0.5 1 14.5 3 10 12 14 12
IAH-72NRV-02003 3000 0.99 2 15.5 4 10.5 16 18 18
IAH-72NRV-03003 5000 1.65 3 16 6 11 22 24 22
IAH-72NRV-04003 7500 2.5 4 17 8.5 11.5 26 28 28
IAH-72NRV-05503 10000 3.3 5.5 18 10.5 12 30 32 32

IAH-72NRV-00505 500 0.275 0.5 14.5 2 10 6 8 8
IAH-72NRV-01005 1000 0.55 1 14.5 2.5 10 10 10 10
IAH-72NRV-01505 1500 0.825 1.5 15 3 10 12 14 14
IAH-72NRV-03005 3000 1.65 3 15.5 4.5 10.5 16 18 18
IAH-72NRV-04505 5000 2.75 4.5 16.5 6.5 11 22 24 24
IAH-72NRV-07005 7500 4.125 7 17.5 8.5 11.5 26 30 30
IAH-72NRV-09005 10000 5.5 9 18.5 11 12 30 34 34

IAH-72NRV-01007 500 0.385 1 15 3 10 6 8 8
IAH-72NRV-01507 1000 0.77 1.5 15 3.5 10 10 12 12
IAH-72NRV-02007 1500 1.155 2 15.5 4 10.5 12 14 14
IAH-72NRV-04007 3000 2.31 4 16 5 11 16 20 20
IAH-72NRV-03507 5000 3.85 6.5 17 7 11 22 24 24
IAH-72NRV-10007 7500 5.775 10 18 9.5 11.5 26 30 30
IAH-72NRV-13007 10000 7.7 13 19 11.5 12 30 36 36

• All data based @ 0°F ambient and process air inlet temperature.
• Process air drop 5.0" w.c. all sizes


IAHR Series
High Efficiency w Recirculating Indirect Fired Air Heater

Stelter and Brinck, Inc. hot side recirculating indirect fired air heater features
high thermal efficiency (up to 90%) and lower operating costs than our NR units.
Our recirculating model is best suited for higher flow, higher temperature, long production
hours or other applications where fuel efficiency is of primary concern.

Exhaust
Heavy, insulated
double wall construction

Access doors Outdoor units include burner and
valve train weather enclosure

Prewired to control enclosure for
interconnection to customer’s DCS,
or remote operator station


IAH-72R
High Efﬁciency w Recirculating Indirect Air Heater with 72% Effective Heat Exchanger

300ºF PROCESS OUTLET TEMP.
IAH-72R-00503 500 0.165 0.5 11 1.5 8.5 8 8 8
IAH-72R-00503 1000 0.33 0.5 11 2 9 10 10 10
IAH-72R-00803 1500 0.5 0.8 11.5 2.5 9.5 12 14 12
IAH-72R-01503 3000 0.99 1.5 11.5 3.5 11 16 18 16
IAH-72R-02503 5000 1.65 2.5 15.5 5.5 13 22 24 22
IAH-72R-03503 7500 2.5 3.5 19 8 15 26 28 26
IAH-72R-03503 10000 3.3 3.5 18.5 10 17.5 30 32 30

IAH-72R-00505 500 0.275 0.5 11 1.5 8.5 6 8 8
IAH-72R-00805 1000 0.55 0.8 11 2 9 10 10 10
IAH-72R-01505 1500 0.825 1.5 13.5 2.5 9.5 12 14 12
IAH-72R-02505 3000 1.65 2.5 15.5 3.5 11 16 18 18
IAH-72R-03505 5000 2.75 3.5 17 5.5 13 22 24 22
IAH-72R-05605 7500 4.125 5.6 20.5 8 15 26 30 26
IAH-72R-07005 10000 5.5 7 22 10 17.5 30 34 30

IAH-72R-00807 500 0.385 0.8 11 1.5 9 6 8 8
IAH-72R-01507 1000 0.77 1.5 13.5 2 9.5 10 12 10
IAH-72R-02507 1500 1.155 2.5 13.5 2.5 10 12 14 12
IAH-72R-03507 3000 2.31 3.5 17 4 11 16 20 18
IAH-72R-05607 5000 3.85 5.6 19.5 6 13 22 24 24
IAH-72R-08707 7500 5.775 8.7 23.5 8 15.5 26 30 28
IAH-72R-12507 10000 7.7 12.5 26 10.5 18 30 32 32

• All data based @ 0ºF ambient and process inlet air temperature.


GUN STYLE AIR HEATERS
Overview
Stelter and Brinck, Inc. gun style heaters are Stelter and Brinck gun style heaters are designed to
completely packaged with combustion blowers, air provide unmatched performance in direct fired air
heat burners, and controls. These heaters offer the heating. AHGS heaters are solidly built for years of
utmost in customer convenience with total prewired great performance. Gun style heaters are a product of
and prepiped assembly . more than 40 years of industrial combustion experi-
ence and feature:
Gun style heaters are designed to be easy to use and
install, among the features offered are: w Standard energy turndown of 30:1 on gaseous fuels.
w Structural steel skid mounted assembly. w Process air temperatures to 2500ºF.
w Integral control panel with annunciator, PID w Fully proportional process air temperature control.
digital temperature control, FM approved high
w Can be provided to fire on natural gas, propane
temperature limit, flame safety relay, main power
gas, mixed fuel gasses, and light, medium, and
disconnect, control transformer, and combustion
heavy oils.
blower motor starter.
w Optional remote control interface capability for use
with PLC or DCS systems available. w Rugged, durable construction.
w FM/NFPA or IRI construction standard. w Unmatched quality.
w Insulated combustion chamber. w Suitable for particulate laden, high temperatures,
and low oxygen content air streams.

AHGS AHGT
Single Pass Gun Style Air Heater Two Pass Gun Style Air Heater


AHGS Series
Single Pass Gun Style Air Heater

AHGS-G
Single Pass Gun Style Air Heater w Gas Fired
Stelter and Brinck, Inc. AHGS-G single pass gun style heaters are designed
for use with gaseous fuels. Our AHGS-G heaters feature a refractory lined shell with
or without an inner liner depending on the process requirements.

Integral control panel

Combustion blower

Process air inlet
Single point fuel connection


AHGS-G

Up to 400ºF output - Natural Gas
Model No. SCFM Standard Max Outlet Length Width Height
Burner Output Diameter A B C
millions BTU/hr inches feet feet feet

1504-AHGS-G 3000 1.50 20 8 3 3.5
3004-AHGS-G 5000 3.00 28 10 3.5 4
5004-AHGS-G 10000 5.00 32 11 4 4.5
7504-AHGS-G 15000 7.50 48 16 5.5 6
10004-AHGS-G 20000 10.00 48 21 5.5 6
12504-AHGS-G 25000 12.50 50 24 5.5 6
20004-AHGS-G 40000 20.00 72 25 7.5 8

• For fuels other than natural gas consult the factory.


4008-AHGS-G 3000 4.00 28 10 3.5 4
6008-AHGS-G 5000 6.00 28 11.5 3.5 4
12508-AHGS-G 10000 12.50 48 24 5.5 6
20008-AHGS-G 15000 20.00 72 25 7.5 8
25008-AHGS-G 20000 25.00 72 28.5 7.5 8
32008-AHGS-G 25000 32.00 54 21 6 6.5
42008-AHGS-G 40000 42.00 68 26 7 7.5



AHGS-G


5012-AHGS-G 3000 5.00 28 11 4 4.5
0012-AHGS-G 5000 10.00 48 21 5.5 6
0012-AHGS-G 10000 20.00 72 25 7.5 8
5012-AHGS-G 15000 25.00 72 28.5 7.5 8
2012-AHGS-G 20000 32.00 52 21 6 6.5
5012-AHGS-G 25000 42.00 58 26 6.5 7
5012-AHGS-G 40000 78.00 70 30 7.5 8



7516-AHGS-G 3000 7.50 48 16 6.5 7
2516-AHGS-G 5000 12.50 48 24 6.5 7
5016-AHGS-G 10000 25.00 72 28.5 8.5 9
2016-AHGS-G 15000 42.00 60 24 7 7.5
5016-AHGS-G 20000 55.00 64 26 7.5 8
0016-AHGS-G 40000 90.00 80 32 9 9.5



AHGS Series
Single Pass Gun Style Air Heater

AHGS-O and AHGS-CGO
Single Pass Gun Style Air Heater w Oil Fired w Combination Gas and Oil Fired
Stelter and Brinck, Inc. AHGS-O single pass gun style heaters are designed for use
with light, medium, or heavy fuel oils. Our AHGS-O heaters feature a ceramic ﬁber
refractory lined shell with an inner liner or a castable refractory lined shell
depending on the process requirements.

Heavy steel, insulated
construction

Combustion blower


Single point connections for Test ﬁred prior to shipment
gas, oil and atomizing media


AHGS-O and AHGS-CGO

Up to 400ºF output - Fuel Oil
millions BTU/hr inches fe e t fe e t fe e t

1504-AHGS-O 3000 1.50 20 8 3 3.5
2504-AHGS-O 5000 2.50 28 11.5 3.5 4
5004-AHGS-O 10000 5.00 40 15 4.5 5
10004-AHGS-O 15000 10.00 40 17 4.5 5
10004-AHGS-O 20000 10.00 44 17 5 5.5
17004-AHGS-O 25000 17.00 72 16 7.5 8
23004-AHGS-O 40000 23.00 80 18 8 8.5



3508-AHGS-O 3000 3.50 36 12 4.5 5
6708-AHGS-O 5000 6.70 36 12 4.5 5
10508-AHGS-O 10000 10.50 64 14 6.5 7
23008-AHGS-O 15000 23.00 72 16 7.5 8
23008-AHGS-O 20000 23.00 80 18 8 8.5
32008-AHGS-O 25000 32.00 92 21 9 9.5
42008-AHGS-O 40000 42.00 104 24 10 10.5



AHGS-O and AHGS-CGO


5012-AHGS-O 3000 5.00 40 15 5 5.5
10012-AHGS-O 5000 10.00 40 17 5 5.5
17012-AHGS-O 10000 17.00 72 16 7.5 8
32012-AHGS-O 15000 32.00 92 21 9.5 10
42012-AHGS-O 25000 42.00 104 24 10.5 11
78012-AHGS-O 40000 78.00 128 30 12.5 13



10016-AHGS-O 3000 10.00 40 15 5.5 6
17016-AHGS-O 5000 17.00 72 16 8.5 9
23016-AHGS-O 10000 23.00 80 18 9 9.5
42016-AHGS-O 15000 42.00 104 24 11 11.5
55016-AHGS-O 20000 55.00 116 26 12 12.5
90016-AHGS-O 40000 90.00 136 32 13.5 14



AHGT
Two Pass Gun Style Air Heater w Oil Fired w Combination Gas and Oil Fired

Stelter and Brinck, Inc. two pass gun style heaters are designed for use with most gaseous and/or liquid fuels
(fuel oils, reclaimed solvents, etc.), and process stream temperatures between 1000˚F and 1400˚F.
The process air stream ﬂows between the outer shell and the inner liner.
The inner shell takes up all thermal expansion of the heater, so the user need not make allowance
for the heater expansion in the system duct design.

Heavy steel, insulated Heavy steel, insulated
construction construction

Combustion blower

Combustion blower


Single point connections for
gas, oil and atomizing media


AHGT
Two Pass Gun Style Air Heater w Oil Fired w Combination Gas and Oil Fired
Up to 1000ºF output

5010-AHGT 3000 5.00 36 13.5 4.5 6
6010-AHGT 5000 6.00 36 13.5 5 6.5
17010-AHGT 10000 17.00 72 18 8 9.5
23010-AHGT 15000 23.00 80 20.5 8.5 10
32010-AHGT 20000 32.00 92 24 9.5 11
42010-AHGT 25000 42.00 104 27 11 12.5
55010-AHGT 40000 55.00 116 29.5 12 13.5

5012-AHGT 3000 5.00 40 17 5 6.5
10012-AHGT 5000 10.00 40 19.5 5 6.5
17012-AHGT 10000 17.00 72 18 8 9.5
32012-AHGT 15000 32.00 92 24 9.5 11
32012-AHGT 20000 32.00 92 24 9.5 11
42012-AHGT 25000 42.00 104 27 11 12.5
78012-AHGT 40000 78.00 128 34 13 14.5

10014-AHGT 3000 10.00 40 19.5 5 6.5
10014-AHGT 5000 10.00 40 19.5 5 6.5
23014-AHGT 10000 23.00 80 20.5 8.5 10
32014-AHGT 15000 32.00 92 24 9.5 11
42014-AHGT 20000 42.00 104 27 10.5 12
55014-AHGT 25000 55.00 116 29.5 11.5 13
78014-AHGT 40000 78.00 128 34 13 14.5


ENVIRONMENTAL SYSTEMS
Stelter and Brinck, Inc. designs and manufactures thermal and catalytic fume oxidizers.
We have an oxidizer to fit your VOC abatement needs.

TFO AFTERBURNER
Thermal Fume Oxidizer Stelter and Brinck, Inc. afterburners are ideal for
high opacity airstreams containing smoke and strong
VOC emissions entrained in an air stream are drawn
odors. Lower airflows and high temp airflows are
into the oxidizer’s process air fan. The fan then dis-
candidates for VOC removal with an afterburner. The
charges the resultant airflow into the oxidizer’s heat
afterburner is a direct thermal oxidizer and provides
exchanger. The airflow is preheated through the tube
for the lowest capital investment.
side of the heat exchanger and then enters the combus-
tion section. The VOC and air mixture is uniformly CFO
exposed to the conversion temperature for the required
Catalytic Fume Oxidizer
residence time. The conversion of the VOCs to carbon
dioxide and water in their vapor phases occurs under If your VOC laden airstream is free of potential cata-
these conditions via an exothermic reaction. The heated lyst fouling agents or poisons, our catalytic units are
airflow is now clean and passes through the shell side your number one option for VOC abatement equip-
of the heat exchanger where heat is transferred from ment. Our catalytic fume oxidizers use a noble metal
the clean stream to the contaminated inlet stream. catalyst monolith to destroy the VOC fumes. Because
The heat exchanger helps to keep fuel consumption at the catalytic unit uses a lower temperature airstream
a minimum. The clean air, after passing through the for effective VOC destruction, the unit uses less fuel
heat exchanger’s shell side, enters the exhaust plenum and lowers the associated operating costs. Our catalytic
to the atmosphere. units are standard with heat recovery to preheat the
incoming VOC air stream to further reduce energy
costs. Secondary heat recovery is available to provide
hot air for use elsewhere in the process or facility.

TFO-HX CFO AFTERBURNER


Process Heat Equipment

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Viewers also liked

Viewers also liked (16)

Similar to Process Heat Equipment

Similar to Process Heat Equipment (20)

More from Stelter & Brinck

More from Stelter & Brinck (20)

Process Heat Equipment