The Classic Model can store up to 62,500 records and has up to 9,560 finger templates (that can be extended up to 25,000 for 1:1 matching). It may be deployed in any type of setting where staff attendance records are required. https://www.starlinkindia.com/Products/classic-model/

1. Classic Model

2. Introduction
Experience the new world of Card with Classic Model, which is exquisitely made to serve
your purpose of canteen management system and access control. Made with latest
technological array including unmatchable features make it a perfect biometric device.
The Classic Model have the recording capacity of 65,000 records with up to 15,000 cards
templates (that can be extended up to 25,000 ). It can be installed in any kind of set-up
where you want to maintain the attendance record of employees.
Featuring a 16 characters x 2 rows of display, which show the details of the employee
during punching. Additionally, any kind of customization can be done to serve the
purpose of clients.

3. Features
LCD Display – 16 characters/2 rows
32 bit RISC micro processor
8 Digit Alphanumeric card number
Capacity of 62,500 records
Built-in 10/100 Mbps Ethernet TCP/IP connectivity
Multiple operational modes
Customization possible (as per the requirement)

4. Reader Type SMART CARD PROXIMITY CARD FINGERPRINT
Model No. SC – 06 PC – 06 FP - 06
Processor 32 Bit RISC MC 32 Bit RISC MC 32 Bit RISC
MC Card Type Smart car 1K, 4K EM Card 512 Byte EM Card
Read Range Up to 60 mm Up to 120 mm Up to 60 / 120 mm
Frequency / Modulation 13.56 Mhz. 125 ghz. 125 ghz / 13.56 Mhz.
Identification Time Less than 1 sec. Less than 1 sec. Less than 1 sec.
Display LCD 16 x 2 Character LCD 16 x 2 Character LCD 16 x 2 Character
Memory Transaction 62,500 records 62,500 records 62,500 records
Card Masking 15,000 records 15,000 records 9,500 / 6,500 records
Communication Mode RS 232, TCP/IP RS 232, TCP/IP RS 232, TCP/IP
Operating Temperature 5 to 50 degree Celsius 5 to 50 degree Celsius 5 to 50 degree Celsius
Specifications(depending on operational
mode)

5. Reader Type SMART CARD PROXIMITY CARD FINGER PRINT
Operating Humidity 10 to 90% 10 to 90% 10 to 90%
Operating Voltage DC 12V, 500 mA DC 12V, 500 mA DC 12V, 500 mA
Dimension (in mm) H=183, W=131, B=58 H=183, W=131, B=58 H=183, W=131, B=58
Weight 600 gms. 600 gms. 600 gms.
Keypad 4 x 4 Keypad 4 x 4 Keypad 4 x 4 Keypad
Audio/Video Indicators Buzzer / LED Buzzer / LED Buzzer / LED

6. Operational Modes
● Only card or finger
● Card with Password
● PIN
● Password

7. Time Zone
Time Zone is one of the feature which
helps to restrict the acceptance of
transaction in that time interval. It is
normally used in Canteen management
system and tea/coffee vending machine.
The time zone can be managed through
Data Capture software and as a whole
10 time zones can be assigned with different
time intervals.

8. Other Utilities of Classic Model

9. Access Control with Classic Model
Access Control is installed in office premises
to restrict the unwanted movements.
Access Control Systems are made up of
three important mechanisms: a controller,
the locks and the access device.
Classic Model can be used as the access
device for successful operation. It also generates
“IN and OUT” report for maintenance of
records.

10. Hooter Interface with Classic Model
Hooter interface is used to be connected
with alarm or hooter that can be fixed
through the biometric device, which is
used for attendance. Classic Model can be
used for accurate and precise working.
It is basically an interface, connected
through the serial port with Classic Model.

11. Tea/Coffee Vending Management
Classic Model can be used in Tea/Coffee
vending management, as time zone comes
into action in its operation. You can limit the
usage of Tea/Coffee vending machine
according to policy on the basis of
employee/department/group. Also, you can
recharge the prepaid/postpaid card through
this system.

12. Canteen Management System
Keeping in mind about many complexities related to
the management of employees in Canteen area,
STAR LINK has designed Canteen Management
System, which is a perfect solution for the
management of canteen facilities for employee.
It restricts the unauthorized usage of canteen facility.
This software helps to automate the process and
make it transparent. It reduces the chaos created
during the lunch or dinner timing, helping to manage
the service swiftly.

13. Wired Connectivity Layout

20. Service & Support

21. Conclusion
In a nutshell, if you are looking to implement
attendance system in your office premises, just go
on for Classic Model. It has been designed to serve
its purpose effectively in workforce management.
Equipped with every latest features and
technologies, Classic Model stands tall in
performance and efficiency. And, the incredible
service and support makes the system even more
proficient in output.

22. For Any Biometric Needs
Contact US
Star Link Communication Pvt Ltd
D-88/4, Okhla Phase I, Okhla Industrial Area,
New Delhi-110020
Phone: 011 4059 8888(100 Lines)
Email:sales@starlinkindia.com
Toll Free No. 1800-11-8088

23. THANK YOU !!!
Visit : www.starlinkindia.com