This document is a user manual for the RX231 evaluation board in Chinese. It provides instructions on how to quickly and properly use the evaluation board. The manual covers downloading and installing the necessary software, connecting the board, programming a sample code onto the board, and testing the touch buttons and slider on the board. It also includes pinout diagrams and specifications for the RX231 microcontroller on the board.
15. One-Day Workshop
Page 2-3 of 2-24
Step 1.4 File New, .
Step 1.5 C Project , .
Step 1.6 Project name , : MyFirstProject
Step 1.7 Project Type , Executable (Renesas) → Sample Project.
Step 1.8 Toolchains , Renesas RXC Toolchain.
Step 1.9 Next .
16. One-Day Workshop
Page 2-4 of 2-24
Step 1.10 Toolchain Version , v2.04.01.
Step 1.11 Debug Hardware , E2 Lite (RX).
Step 1.12 Data endian , Little-endian data.
Step 1.13 Select Target , , RX200 → RX231 → RX231 100pin → R5F52318AxFP.
Step 1.14 Select Configurations , Debug using Simulator.
Step 1.15 Next .
Step 1.16 Use Peripheral code Generator.
Step 1.17 Next .
17. One-Day Workshop
Page 2-5 of 2-24
Step 1.18 Renesas MCUs CPU . e
2
Studio .
Next .
Step 1.19 Global Options Settings . , Next
Step 1.20 header files code generation, RXC compiler C99 .
C(C99), Next .
18. One-Day Workshop
Page 2-6 of 2-24
Step 1.21 stack areas startup file .
Generate Hardware Setup Function C/C++ Source File, Finish .
Step 1.22 , summary . OK.
26. One-Day Workshop
Page 2-14 of 2-24
Step 2.9 Project Explorer , src cg_src .
Step 2.10 Project Explorer r_cg_main.c .
Step 2.11 63 /* Start user code. Do not edit comment generated here */
while (1U)
{
;
}
/* End user code. Do not edit comment generated here */
Step 2.12 R_RTC_Start(); ( )
Step 2.13 Project Explorer r_cg_rtc_user.c .
Step 2.14 63 /* Start user code. Do not edit comment generated here */
/* End user code. Do not edit comment generated here */
Real Time clock I/O port
(API) ( )