conical screw mixer is very good for powder mixing

1. VORTEX INDUSTRIAL TECHNOLOGY CO.,LTD
E-mail: info@incmachine.com www.incmachine.com
Add: No.128 Huayuan Road, Hongkou District, Shanghai, China
Conical Screw Blender for Powders

2. VORTEX INDUSTRIAL TECHNOLOGY CO.,LTD
E-mail: info@incmachine.com www.incmachine.com
Add: No.128 Huayuan Road, Hongkou District, Shanghai, China
The vortex conical screw blender is used for mixing and blending powders in
the following industries: chemicals, petrochemicals, pharmaceuticals, food,
cosmetics, and plastics. Conical screw processors can be supplied in carbon
steel, stainless steel, and other exotic alloys. The conical blender has a tapered
screw was standard construction. The tapered screw is more efficient than the
straight screw. This design reduces the total overall height, decreases the
blending time, and improves the efficiency of the mixer.
Pictured is 3000L conical screw mixer is ideal for mixing a wide range of
applications, such as powders, granules, pellets, fibers, pastes, and slurries.
This this type of mixing equipment features a slow-turning auger screw that
gently lifts batch materials upward as it orbits around a conical vessel.
Materials carried to the top of batch then cascade slowly back down into
regions opposite the moving auger screw. The conical screw mixer also
available for vacuum feeding and vacuum drying function. Vacuum feeder
equipping on top of the mixer employed to transport the materials.
A common issue in agitated dryers is the risk of product attrition or generation
of fines. This concern is well minimized in a conical mixer/dryer because the
blending action is thorough but low impact. During the drying cycle, hot water,
oil, or steam is recirculated through the vessel jacket. Due to lower processing
temperatures made possible by vacuum environment, there is a reduced risk
of creating hot spots on the vessel walls where product could bake. The
constant exchange of materials between heated sidewalls and the center of
blender accelerates the drying process.
In summary, the conical screw mixer is an ideal design could be fit where
space on the plant floor is at a minimum. And it’s gentle blending action is
ideal for friable or shear sensitives powders.