ALLScanner VCX-PLUS MULTI (Porsche Piwis Tester II V14.35 + LAND ROVER JLR V139) avec CF30 portable, ceci est la dernière testeur professionnel pour Porsche, avec des fonctions puissantes et un accès complet. En outre, il supporte LandRover et Jaguar après année 2005 avec le soutien de logiciel de JLR V139.

1. Numéro de l'article. SP161-C
http://www.diyobd2.fr/wholesale/allscanner-vcx-plus-multi-piwis-tester-ii-for-porsche-land-rove
r-jlr-with-cf30-laptop.html
Solved VCI Configuration Error
Some Allscanner VCX-PLUS Porsche tester II users are confronted with “VCI Configuration Error”
when using this tool (shown at pictures below)

2. Here are the analysis and solution:
1. Customers can not set up PIWIS 2 computer software on Lenovo or Dell CF30 laptop, VCX-PLUS
computer software cannot be used on Panasonic CF30 laptop vie visa. The software will be dead
and cannot detect VCI if can replace the laptop hardware to an additional laptop.
2. Do adhere to the correct way of connect Piwis two or VCX-PLUS diagnostic system
Step 1: Turn around the ignition and start off the engine
Step 2: Connect the Piwis two or VCX-PLUS main unit in to the diagnostic socket
Step 3: Connect PIWIS 2 or VCX-PLUS primary unit with laptop by means of USB cable following
each of the device indicator light turn on
Step 4: Run application and choose vehicle model you would like to detect

3. Step 5: After selecting automobile model, immediately start diagnosis.
Step 6: Waiting for the diagnostic outcome.
When the system displays some ECU modules out there after diagnosis comprehensive, it
indicates that the technique is superior and able to detect the ECU modules automatically.

4. When the method cannot detect any ECU modules, it shows that there’s no excellent connection
amongst automobile, device and personal computer or the device is damaged.