Speedokote 1k sealer

1. SMR-250
SPEEDO SEAL 1K SEALER (2.1 VOC)
TECHNICAL DATA
DESCRIPTION:
SMR-250 Speedo Seal is a super smooth, one component primer sealer. It can be
used on all previously coated metal surfaces to provide a uniform surface prior to
topcoat. SMR-250 Speedo Seal has tremendous adhesion and excellent color
holdout. Ready to spray; no mixing required. Pour unused sealer back in the can
for future use.
PACKAGING:
Part Number Description Size Qty. Case
SMR-250 SPEEDO SEAL 1K SEALER Gallon 4
SMR-250-Q SPEEDO SEAL 1K SEALER Quart 6
APPLICATION
Shake or stir well before each use.
Apply 1 uniform coat using a good quality spray gun with a 1.0mm-1.3mm fluid
tip. Allow 15 minutes before topcoating. After overnight dry, clean, scuff and
recoat before applying basecoat.
If light de-nib is required WET sand only with 500-800 grit paper. If allowed to
cure for 24 hours Dry or Wet sanding is acceptable.
GUN SETUP
Fluid Tip psi
Mini Spray Gun 1.0 – 1.3mm 5-15 psi
Conventional Gravity Feed 1.3mm 25-30 psi
DRY TIMES
Air Dry
Topcoat 15 minutes
SpeedoKote LLC ■ 5701 N. Webster St. ■ Dayton, Ohio 45414 ■ (937) 280-0091 ■ Fax (937) 280-0092
www.speedokote.com ■ e-mail: sales@speedokote.com