1. SMR-120
SPEEDO CLEAR “High Temp” (National Rule)
TECHNICAL DATA
DESCRIPTION:
SMR-120, 4.2 V.O.C. Speedo Mobile Repair clearcoat has been specifically formulated for the
mobile repair industry. SMR-120 has been designed to increase productivity without
sacrificing quality. SMR-120 is a 2K acrylic urethane clear with superior UV and chemical
resistance.
TECHNICAL PRODUCT INFORMATION:
SMR-120, Speedo Mobile Repair 4.2 V.O.C. clearcoat utilizes new resin technology which
allows for an extremely fast cure while maintaining an ultra high gloss. SMR-120 is easy to
apply and can be BUFFED in 30-60 MINUTES, yielding a DOI equal to an overnight dry
clear.
PACKAGING:
Part Number Description Temp. Size Qty. Case
SMR-120 SPEEDO CLEAR “High Temp” 4.2 VOC Gallon 4
SMR-120-Q SPEEDO CLEAR “High Temp” 4.2 VOC Quart 6
SMR-150-Q SPEEDO ACTIVATOR Quart 12
SMR-150-8 SPEEDO ACTIVATOR 8 oz. 12
SMR-300-Q SPEEDO THIN SPEED REDUCER FAST 55°F - 65°F Quart 12
SMR-310-Q SPEEDO THIN SPEED REDUCER MEDIUM 65°F - 80°F Quart 12
SMR-320-Q SPEEDO THIN SPEED REDUCER SLOW 80°F - up Quart 12
NOTE: Using any other reducer will DECREASE product performance.
MIX RATIO:
SMR-120 is activated with SMR-150 (Speedo Activator) at a 4:1 ratio and can be reduced up
to 5% with SMR-300 / SMR-310 / SMR-320 Speedo Reducers.
4 Parts SPEEDO CLEAR
1 Part SPEEDO ACTIVATOR
5% Optional SPEEDO THIN SPEED REDUCER
BASECOAT:
Can be applied over any urethane compatible basecoat. Please follow the basecoat
manufacture’s recommended clearcoat dry times. To increase Basecoat adhesion to substrate
and/or clearcoat, add 5-10% SMR-600 Speedo Base Activator to mixed basecoat prior to
application.
SpeedoKote LLC ■ 5701 N. Webster St. ■ Dayton, Ohio 45414 ■ (937) 280-0091 ■ Fax (937) 280-0092
www.speedokote.com ■ e-mail: sales@speedokote.com
2. GUN SETUP
Fluid Tip psi
Mini Spray Gun 1.0 – 1.3mm 5-15 psi
Conventional Gravity Feed 1.3mm 25-30 psi
APPLICATION
Using a 1.0-1.3 mm spray tip, apply 2-5 coats continuously until desired leveling is achieved.
No flash required between coats.
DRY TIMES
Air Dry
Flash Between Coats 0 minutes
Dust Free 2 minutes
Air Dry 10-15 minutes
Express Dry
Flash Between Coats 0 minutes
Flash Before Force Dry 0 minutes
Bake Time 10 minutes @120°F to 140°F
BLENDING
Using SMR-400-Q / SMR-410-A Speedo Blend apply a light mist to blend edge after each
coat until desired look is achieved.
RECOATABILITY/REPAIR
SMR-120 Speedo Clear may be recoated for repair. After cool down when baked. Air dry
repair 2 hours.
SANDING/COMPOUNDING/POLISHING
Optimum Times
Express Dry After cool down
Air Dry 30-60 minutes 30 minutes when using SMR-300
Sanding
Express Dry After cool down Light de-nib: 2000 grit wet
Air Dry 30-60 minutes Light de-nib: 2000 grit wet
Compounding
Express Dry After cool down Foam compound pad (recommended)
Air Dry 30-60 minutes Foam compound pad (recommended)
Polishing
Express Dry After cool down Foam polishing pad (recommended)
Air Dry 30-60 minutes Foam polishing pad (recommended)
SpeedoKote LLC ■ 5701 N. Webster St. ■ Dayton, Ohio 45414 ■ (937) 280-0091 ■ Fax (937) 280-0092
www.speedokote.com ■ e-mail: sales@speedokote.com